Vince1 Posted February 19, 2014 Posted February 19, 2014 Hey guys! I don't have a reticle in the flexible gun sight. I do al the switches right but still no aiming reticle after I installed the update. Does anybody else have this problem?
Lizzard Posted February 19, 2014 Posted February 19, 2014 strange...uhm first Question..do you look through the sight at the correct angle?! So..do you use TrackIR or something?! The only Switch needed in 1.2.7 is the Lamp Switch on the back of the sight...you flicked that?! My Specs: I don`t care..it is a Computer..a black one..
Vince1 Posted February 20, 2014 Author Posted February 20, 2014 Hey Lizzard! Thanks for your reply! I flip the switch on the back and I adjust the brightness with the wheel on the left. I play the mission editor and just shoot around. I use the sim Huey not the game Huey, so I start the engine myself. Maybe I miss a switch.
VincentLaw Posted February 20, 2014 Posted February 20, 2014 (edited) Maybe I miss a switch.In 1.2.7 the only two switches you need for the flexible sight to work are the battery switch to ON, and weapons to SAFE or ARM mode. (Then press M to use it) For the pilot sight to work, you also need to switch INVTR to MAIN or SPARE, press Shift+M to lower the sight, and press Ctrl+M to activate it. Edited February 20, 2014 by VincentLaw [sIGPIC][/sIGPIC]
westr Posted February 20, 2014 Posted February 20, 2014 Vince I have the same problem with the Huey. Will be interesting to see if somebody has an answer. RYZEN 7 3700X Running at 4.35 GHz NVIDIA GeForce GTX 1080Ti 32gb DDR4 RAM @3200 MHz Oculus CV1 NvME 970 EVO TM Warthog Stick & Throttle plus 11" extension. VKB T-Rudder MKIV
westr Posted February 20, 2014 Posted February 20, 2014 Hey guys! I don't have a reticle in the flexible gun sight. I do al the switches right but still no aiming reticle after I installed the update. Does anybody else have this problem? I found this http://forums.eagle.ru/showthread.php?t=113516 I'm going to give it a try in a bit and see if it works. RYZEN 7 3700X Running at 4.35 GHz NVIDIA GeForce GTX 1080Ti 32gb DDR4 RAM @3200 MHz Oculus CV1 NvME 970 EVO TM Warthog Stick & Throttle plus 11" extension. VKB T-Rudder MKIV
VincentLaw Posted February 20, 2014 Posted February 20, 2014 I found this http://forums.eagle.ru/showthread.php?t=113516 I'm going to give it a try in a bit and see if it works.Oh, yeah in 1.2.6 the default brightness was set to 0%. Now I think it starts at 100%. [sIGPIC][/sIGPIC]
westr Posted February 20, 2014 Posted February 20, 2014 Ok I've worked it out go to the link I posted earlier http://forums.eagle.ru/showthread.php?t=113516 On the attachment on the link it points to a switch no 3 which is at the back of the sight if you flick this switch on the sight comes up. Now I'm not sure if you have trackir? If you haven't it could be a problem to get the angle to see the switch. RYZEN 7 3700X Running at 4.35 GHz NVIDIA GeForce GTX 1080Ti 32gb DDR4 RAM @3200 MHz Oculus CV1 NvME 970 EVO TM Warthog Stick & Throttle plus 11" extension. VKB T-Rudder MKIV
Lizzard Posted February 20, 2014 Posted February 20, 2014 I play the mission editor and just shoot around. I use the sim Huey not the game Huey, so I start the engine myself. Maybe I miss a switch. o.k. sö what about an automatic startup, or a Huey set to "start from Runway"..have you tried that?! My Specs: I don`t care..it is a Computer..a black one..
VincentLaw Posted February 20, 2014 Posted February 20, 2014 Ok I've worked it out go to the link I posted earlier http://forums.eagle.ru/showthread.php?t=113516 On the attachment on the link it points to a switch no 3 which is at the back of the sight if you flick this switch on the sight comes up. Now I'm not sure if you have trackir? If you haven't it could be a problem to get the angle to see the switch.That is not the flexible sight, and doesn't pressing Ctrl+M do the same thing as that switch? [sIGPIC][/sIGPIC]
westr Posted February 20, 2014 Posted February 20, 2014 That is not the flexible sight, and doesn't pressing Ctrl+M do the same thing as that switch? Ok I realise I have got mixed up with the flexible sight and pilots gunsight my mistake. But I have never had a problem before with the flexible gunsight before it is always there as soon as I set master arm switch on so I wonder If the guy got mixed up with the sights as well? Same as me and its the Pilots sight switch he has had trouble with? RYZEN 7 3700X Running at 4.35 GHz NVIDIA GeForce GTX 1080Ti 32gb DDR4 RAM @3200 MHz Oculus CV1 NvME 970 EVO TM Warthog Stick & Throttle plus 11" extension. VKB T-Rudder MKIV
Vince1 Posted February 21, 2014 Author Posted February 21, 2014 Hey Westr! Try the reply from Vincentlaw! I forgot the INVTR switch :doh: Now its working like a champ! Thanks Vincentlaw! :thumbup:
Recommended Posts