Jump to content

Recommended Posts

Posted (edited)

That doesnt do anything

All it does is turn off the top left or right led but all the other buttons are still flashing

Edited by maestro72x
Posted

mmm mine don't do that. might want to check your USB power levels..

 

could be a mobo issue. :joystick:

"any failure you meet, is never a defeat; merely a set up for a greater come back",  W Forbes.

"Success is not final, failure is not fatal, it is the courage to continue that counts",
"He who never changes his mind, never changes anything," Winston Churchill.

MSI z690 MPG DDR4 || i9-14900k|| ddr4-64gb PC3200 |zotac RTX 5080|Game max 1300w|Win11| |turtle beach elite pro 5.1|| ViRpiL,T50cm2||MFG Crosswinds|| VT50CM-plus rotor Throttle || Z10 RGB EVGA Keyboard/ G502LogiMouse || PiMax Crystal VR || 32 Asus||

Posted (edited)
The go solid after the game is running and work fine.. they are plugged into the mb directly

 

ok so maybe your USB's are going to sleep. you can stop them from polling like this

 

Control manager/ Device Manager/ find the USB device that your MFD's are connected to by right clicking and reading the properties and the general tab, once you find the right ones, click on power management then un tic the box that says allow the computer to turn off this device to save power.

 

acdmvyuuk4zzaci6g.jpg

Edited by Mastiff

"any failure you meet, is never a defeat; merely a set up for a greater come back",  W Forbes.

"Success is not final, failure is not fatal, it is the courage to continue that counts",
"He who never changes his mind, never changes anything," Winston Churchill.

MSI z690 MPG DDR4 || i9-14900k|| ddr4-64gb PC3200 |zotac RTX 5080|Game max 1300w|Win11| |turtle beach elite pro 5.1|| ViRpiL,T50cm2||MFG Crosswinds|| VT50CM-plus rotor Throttle || Z10 RGB EVGA Keyboard/ G502LogiMouse || PiMax Crystal VR || 32 Asus||

Posted (edited)

Tried that, doesnt work. and yes they are blinking because of a power issue becuase as soon as they are accessed they stay on solid

Edited by maestro72x
Posted
Tried that, doesnt work. and yes they are blinking because of a power issue becuase as soon as they are accessed they stay on solid

 

its because your USB/ controller is polling, and causing them to blink. have you checked your MoBo manufactures BIOS support for updates..

or do what I do and just unplug them. I have to because of other games and flight sims I play.

"any failure you meet, is never a defeat; merely a set up for a greater come back",  W Forbes.

"Success is not final, failure is not fatal, it is the courage to continue that counts",
"He who never changes his mind, never changes anything," Winston Churchill.

MSI z690 MPG DDR4 || i9-14900k|| ddr4-64gb PC3200 |zotac RTX 5080|Game max 1300w|Win11| |turtle beach elite pro 5.1|| ViRpiL,T50cm2||MFG Crosswinds|| VT50CM-plus rotor Throttle || Z10 RGB EVGA Keyboard/ G502LogiMouse || PiMax Crystal VR || 32 Asus||

Posted

Try running them from a POWERED USB hub... You may be over-taxing the USB ports on that machine.. (And I know it is plugged directly to the mainboard, but often the ports on the board are still using the SAME root hub so having items connected to one port can still affect the other ports as well...)

 

bottom line... Try a powered USB hub and you may be OK...

"Pride is a poor substitute for intelligence."

RAMBO

Posted

found this http://support.microsoft.com/kb/2900614

all fixed now.. you have to find the proper device and disable the EnhancedPowerManagementEnabled to 0

You will find the device in Device Manager under "Human Interface Devices"

its one of the USB Input Devices

The easist way i found to identify the device is to unplug all unnecessary usb devices including the MFD's for any USB device that is left go into the "USB Input Device" properties and uncheck"Allow the computer to turn off this device to save power" for all remaining devices (you can turn back on later)

then plug in the MFD's.. find the 2 USB Input devices that still have the "Allow the computer to turn off this device to save power" checked.. those are the two units were you need to get the Device Instance Path's to find in the registry to disable EnhancedPowerManagementEnabled to 0

 

I m on windows 8.1

Posted

No. not that cuz its on my motherboard and nothing else is plugged in but my keyboard..

its a windows 8.1 power saving issue is all..

 

 

Try running them from a POWERED USB hub... You may be over-taxing the USB ports on that machine.. (And I know it is plugged directly to the mainboard, but often the ports on the board are still using the SAME root hub so having items connected to one port can still affect the other ports as well...)

 

bottom line... Try a powered USB hub and you may be OK...

Posted
No. not that cuz its on my motherboard and nothing else is plugged in but my keyboard..

its a windows 8.1 power saving issue is all..

 

hence the reason I haven't upgraded to 8.1, issues with it and gaming.

"any failure you meet, is never a defeat; merely a set up for a greater come back",  W Forbes.

"Success is not final, failure is not fatal, it is the courage to continue that counts",
"He who never changes his mind, never changes anything," Winston Churchill.

MSI z690 MPG DDR4 || i9-14900k|| ddr4-64gb PC3200 |zotac RTX 5080|Game max 1300w|Win11| |turtle beach elite pro 5.1|| ViRpiL,T50cm2||MFG Crosswinds|| VT50CM-plus rotor Throttle || Z10 RGB EVGA Keyboard/ G502LogiMouse || PiMax Crystal VR || 32 Asus||

Posted
hence the reason I haven't upgraded to 8.1, issues with it and gaming.

 

Interesting as I have 8.1 and have had zero issues with gaming / usb whatever... I don't particularly like it, but no issues here..

 

And I have no less than 15 USB items connected to my machine...

 

(Make sure you have the latest MB drivers )

"Pride is a poor substitute for intelligence."

RAMBO

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...