Vintovka Posted September 27, 2014 Share Posted September 27, 2014 Is it possible to correctly set the afterburner detent on the throttle? Right now the range of the throttle only gives me about 80% power at the detent. I have to move above the detent for 90% and 100% throttle as well as afterburner. Is this actually correct or is there a way to have 100% throttle range and set the AB above the detent? Link to comment Share on other sites More sharing options...
Corrigan Posted September 27, 2014 Share Posted September 27, 2014 Tweaking the axis curve so that it's steeper before the detent and shallower after should work. You'll have to play around with it, obviously. Win10 x64 | SSDs | i5 2500K @ 4.4 GHz | 16 GB RAM | GTX 970 | TM Warthog HOTAS | Saitek pedals | TIR5 Link to comment Share on other sites More sharing options...
Vintovka Posted September 27, 2014 Author Share Posted September 27, 2014 (edited) Tweaking the axis curve so that it's steeper before the detent and shallower after should work. You'll have to play around with it, obviously. Thanks I will try this now. Edit: This is actually far more difficult than I imagined. Are you talking about tweaking X and Y saturation or are you talking about clicking the User Curve button and manually adjusting the sliders. Edited September 27, 2014 by Vintovka Link to comment Share on other sites More sharing options...
Corrigan Posted September 27, 2014 Share Posted September 27, 2014 No, the curve slider. I'd set -15, check, adjust. Rinse and repeat. Win10 x64 | SSDs | i5 2500K @ 4.4 GHz | 16 GB RAM | GTX 970 | TM Warthog HOTAS | Saitek pedals | TIR5 Link to comment Share on other sites More sharing options...
ff4life4 Posted September 27, 2014 Share Posted September 27, 2014 I have the same issue with the x52 pro. Detent only gives me roughlty 85 to 90%. This is the only module with this issue. All Fc3 aircraft are at full mil at the detent Link to comment Share on other sites More sharing options...
Vintovka Posted September 27, 2014 Author Share Posted September 27, 2014 Ok I found that the curve set to -47 will give me full 100% power. Just over the detent now activates afterburner. The only problem with -47 curve is now the throttle is very sensitive. Should be alright though after some getting used to. Link to comment Share on other sites More sharing options...
Rooks Posted September 27, 2014 Share Posted September 27, 2014 Try setting the throttle to a slider and add a 30% curve. Works spot on for me Link to comment Share on other sites More sharing options...
_Randolph93 Posted September 27, 2014 Share Posted September 27, 2014 Hi, I don't know how it would work on TM warthog but I had the same problem on saitek x52 Pro then finally got it working by setting axis to slider with deadzone on 7 Intel i5-9600k - Asus TUF Z390 - 32GB DDR4 corsair - Gigabyte RTX 2070 - Seasonic 620W - SSD Crucial, HDD Seagate Link to comment Share on other sites More sharing options...
Vintovka Posted September 27, 2014 Author Share Posted September 27, 2014 Try setting the throttle to a slider and add a 30% curve. Works spot on for me Big improvement! I found the best setting to be throttle with the slider box check marked like you said but a curve of 27. With 30 curve I could slam into the AB detent and my afterburner would engage and disengage rapidly. It's pretty funny to see the massive black smoke trail from the AB engaging/disengaging so fast. Link to comment Share on other sites More sharing options...
Rooks Posted September 27, 2014 Share Posted September 27, 2014 Glad it helped. Figured there might be some variation Link to comment Share on other sites More sharing options...
Recommended Posts