Maler Posted December 26, 2014 Posted December 26, 2014 (edited) ... Edited November 2, 2015 by Maler "Screw you guys, i'm going home."
DB 605 Posted December 26, 2014 Posted December 26, 2014 Looks great, downloading now. Thank you! CPU: Intel Core i7-2600k @3.40GHz | Motherboard: Asus P8P67-M | Memory: Kingston 8GB DDR3 | OS W10 | GPU: Sapphire R9 290x 8GBDDR5 | Monitor: Samsung Syncmaster 24" | Devices: Oculus Rift, MS FFB 2 joystick, Saitek X 52 Pro throttle, Saitek Pro pedals, Gametrix Jetseat [sIGPIC][/sIGPIC]
JST Posted December 26, 2014 Posted December 26, 2014 What about all the incorrect and poorly shaped filler caps? Still, good to see improvements. My skins/liveries for Fw 190 D-9 and Bf 109 K-4: My blog or Forums. Open for requests as well. [sIGPIC][/sIGPIC]
Maler Posted December 26, 2014 Author Posted December 26, 2014 What about all the incorrect and poorly shaped filler caps? Still, good to see improvements. If it's not difficult, please show me the mistake on the blueprint. "Screw you guys, i'm going home."
JST Posted December 26, 2014 Posted December 26, 2014 Would help me if you showed the blueprint first. My skins/liveries for Fw 190 D-9 and Bf 109 K-4: My blog or Forums. Open for requests as well. [sIGPIC][/sIGPIC]
Guest =YeS=CMF Posted December 26, 2014 Posted December 26, 2014 Maler means what incorrect things you tell about? Can you show it? We mast see it to try to correct it. =)
arthuro12 Posted December 26, 2014 Posted December 26, 2014 Quite curious what Maler used for reference, I see a lot of differences in the template when compared to JST's. [sIGPIC][/sIGPIC]
JST Posted December 26, 2014 Posted December 26, 2014 - Mid-fuselage filler cap on right side - Filler cap sizes - Radio hatch is incorrectly shaped - Right side latches on the bottom engine cowling - Oxygen filler cap next to the battery port - Filler caps near the wingroot on the right wing - Rivets on tailplane - Vents below the canopy No blueprints, but I can upload a ton of uniform photographs. E: Quite curious what Maler used for reference, I see a lot of differences in the template when compared to JST's. I'm curious as well. My skins/liveries for Fw 190 D-9 and Bf 109 K-4: My blog or Forums. Open for requests as well. [sIGPIC][/sIGPIC]
arthuro12 Posted December 26, 2014 Posted December 26, 2014 (edited) - Mid-fuselage filler cap on right side - Filler cap sizes - Radio hatch is incorrectly shaped - Right side latches on the bottom engine cowling - Oxygen filler cap next to the battery port - Filler caps near the wingroot on the right wing - Rivets on tailplane - Vents below the canopy That entire list pretty much, when comparing to photo's and schematics found in popular books I find some of the scaling to be off by quite a bit. Not sure if this a problem with the actual 3d model or your references Maler. I run into this problem far less using JST's template to be honest. Also, why isn't his template thread a sticky as well? Friend of mine had trouble finding it :0 Edited December 26, 2014 by arthuro12 [sIGPIC][/sIGPIC]
Maler Posted December 26, 2014 Author Posted December 26, 2014 (edited) - Mid-fuselage filler cap on right side - Filler cap sizes - Radio hatch is incorrectly shaped - Right side latches on the bottom engine cowling - Oxygen filler cap next to the battery port - Filler caps near the wingroot on the right wing - Rivets on tailplane - Vents below the canopy No blueprints, but I can upload a ton of uniform photographs. E: I'm curious as well. That entire list pretty much, when comparing to photo's and schematics found in popular books I find some of the scaling to be off by quite a bit. Not sure if this a problem with the actual 3d model or your references Maler. I run into this problem far less using JST's template to be honest. Also, why isn't his template thread a sticky as well? Friend of mine had trouble finding it :0 I'm always curious to see the photos, but the motive for corrective template i am accept only blueprint from the factory Mtt reg. Looking at your template I'm not sure of its authenticity. Sorry. There were a lot of options and edits each series K4. With a wooden tail, metal. From Erla or Mtt factory and so on. But you can always gather the necessary materials for corrections and seek ED. As well you can write a moderator asking sticky topic JST with his template Edited December 26, 2014 by Maler "Screw you guys, i'm going home."
arthuro12 Posted December 26, 2014 Posted December 26, 2014 Oh I thought you could do it, my bad :s It looks awesome though, don't take me wrong :) [sIGPIC][/sIGPIC]
JST Posted December 27, 2014 Posted December 27, 2014 I'm always curious to see the photos, but the motive for corrective template i am accept only blueprint from the factory Mtt reg. Looking at your template I'm not sure of its authenticity. Sorry. There were a lot of options and edits each series K4. With a wooden tail, metal. From Erla or Mtt factory and so on. But you can always gather the necessary materials for corrections and seek ED. Can you share bits of these blueprints? Or atleast tell the date on them? I guess this is just the difference of what is considered reliable source material, then. It's not black and white, but I'll take even few dozen photographs over what was drawn on paper. Empennage aside, only consistent difference in build? Circular cap on section 2. My skins/liveries for Fw 190 D-9 and Bf 109 K-4: My blog or Forums. Open for requests as well. [sIGPIC][/sIGPIC]
Maler Posted December 27, 2014 Author Posted December 27, 2014 Can you share bits of these blueprints? Or atleast tell the date on them? I have all sorts of public figures. They are all different. I can upload a ton of uniform photographs. I still want to see your photos. P.S. Sorry I can not be without an interpreter to communicate with you. There is a feeling of misunderstanding. "Screw you guys, i'm going home."
JST Posted December 27, 2014 Posted December 27, 2014 So that's a no? Here, various pictures of actual K-4's from several production blocks: http://imgur.com/a/9NLPN If you want more: I don't think there's a misunderstanding, just you not willing/allowed to share. Can you atleast give me a single logical explanation or even a picture of a 109 F/G/K with cowling latches on the bottom right (Hinge side) or G/K with the top wing caps being on the right wing. My skins/liveries for Fw 190 D-9 and Bf 109 K-4: My blog or Forums. Open for requests as well. [sIGPIC][/sIGPIC]
Maler Posted December 27, 2014 Author Posted December 27, 2014 With regard to these items, persuaded. Fixed. Can you atleast give me a single logical explanation or even a picture of a 109 F/G/K with cowling latches on the bottom right (Hinge side) or G/K with the top wing caps being on the right wing. I do not understand about what you say. Can in the future to attach a screenshot of the problem details circled place? "Screw you guys, i'm going home."
JST Posted December 27, 2014 Posted December 27, 2014 Addition to the pictures, from K-4 handbook November 1944 (Note 13): My skins/liveries for Fw 190 D-9 and Bf 109 K-4: My blog or Forums. Open for requests as well. [sIGPIC][/sIGPIC]
Maler Posted December 27, 2014 Author Posted December 27, 2014 Oh, is another matter. Thank you for your comments. "Screw you guys, i'm going home."
JST Posted December 27, 2014 Posted December 27, 2014 No problem, I'm glad this helped. My skins/liveries for Fw 190 D-9 and Bf 109 K-4: My blog or Forums. Open for requests as well. [sIGPIC][/sIGPIC]
Recommended Posts