Blaze13 Posted March 23, 2015 Posted March 23, 2015 So i recently got a x-55 and im having some strange issues that is causing a bsod. So i load up a profile into the software and fly around for a bit then i can close the game off and get 2 things. First is i can have a random key be stuck and be like that until i hold down the power button. OR i can Rclick on the software and clear the profile and BSOD. https://dl.dropboxusercontent.com/u/10691692/Fraps/2015-03-23%2002.15.21.jpg is the bsod i get. Now i have done a uninstall of the software and driver according to https://forums.robertsspaceindustries.com/discussion/148913/x-55-not-working-try-this But yet i still get the issue. And finally the voip i use is Ventrilo and the ptt key is not bound to the stick if anybody is wondering.
King_Hrothgar Posted March 24, 2015 Posted March 24, 2015 Probable power use issue. Make sure it is on a powered USB and the only thing plugged into it. I'm serious. The first time I plugged my X-55 throttle in my entire PC blinked off. It drew that much power off the back panel. After a bit of shuffling around between the back panel and a separately powered front panel, everything works flawlessly. I know the issue you have sounds like a software issue and it may very well be. But the first thing you should do is what I described above. Nearly all confirmed issues, no matter how strange, have originated with power use.
SnowTiger Posted March 24, 2015 Posted March 24, 2015 I agree with King Hrothgar. To me it seemed moot that a Powered USB Hub would make any difference but that in itself immediately eliminated ALL my issues with my new X-55 Rhino. Also, with regards to repetitive (random) keystrokes, you might simply need to double check that ALL the Thumb Wheels are put in their Neutral Detent Position (assuming you have programmed them at all). I have a several different HUD Profiles (X-55 Hud Software) for different DCS Mods/Aircraft. Of these, I have created Bands for the Thumb Wheels/Rotaries. When I close out DCS, if any of these Thumb Wheels are not in their central/neutral position, I will get all sorts of Keystrokes or Icon Selections on my Desktop. Clearing those profiles from the Taskbar thingy, OR neutralizing those wheels, will stop the random keystrokes. But again, this is all assuming that you have first connected your HOTAS via a Powered USB Hub. SnowTiger AMD Ryzen 9 7950X - Zen 4 16-Core 4.5 GHz - Socket AM5 - 170W Desktop Processor ASUS ROG STRIX X670E-A GAMING WIFI 6E Socket AM5 (LGA 1718) Ryzen 7000 gaming motherboard Geforce RTX 4090 Gaming Trio X - 24GB GDDR6X + META Quest 3 + Controllers + Warthog Throttle, CH Pro Pedals, VKB Gunfighter MKII MCG Pro G.SKILL Trident Z5 Neo Series 64 GB RAM (2 x 32GB) 288-Pin PC RAM DDR5 6000 RAM
Blaze13 Posted March 24, 2015 Author Posted March 24, 2015 So i reread my post and did for get to mention that Both the Stick and the throttle are plugged into a powered usb hub. Mind you it is an older one belkin f5u234 i have a old version of it. As for any All of the wheels are in the neutral position except the one of the left throttle as that one dose not have a neutral position. I did how ever replace my usb hub today so a nice new one so will have to see if that works.
Devrim Posted March 24, 2015 Posted March 24, 2015 I used to see BSOD when very first usage of my X-52 (I connected them directly to USB ports). The BSOD problem was fixed when I did update motherboard firmware. I just wanted to share this, in any case... Intel i7-14700@5.6GHz | MSI RTX4080 SuperSuprimX | Corsair V. 64GB@6400MHz. | Samsung 1TB 990 PRO SSD (Win10Homex64) Samsung G5 32" + Samsung 18" + 2x8"TFT Displays | TM Warthog Stick w/AVA Base | VPC MongoosT-50CM3 Throttle | TM MFD Cougars | Logitech G13, G230, G510, PZ55 & Farming Sim Panel | TIR5 & M.Quest3 VR >>MY MODS<< | Discord: Devrim#1068
Blaze13 Posted March 26, 2015 Author Posted March 26, 2015 I wish the bios update issue would have been the fix. But i did do a bios update and yet still get the bsod. Gonna have to try my stick on another computer and see if my OS dose not like the stick.
SnowTiger Posted March 26, 2015 Posted March 26, 2015 Gonna have to try my stick on another computer and see if my OS dose not like the stick. What OS are you using ? For that matter, what is your System's Specs (re: Mother board, Processor ETC) ? This information may be needed to resolve your issue. SnowTiger AMD Ryzen 9 7950X - Zen 4 16-Core 4.5 GHz - Socket AM5 - 170W Desktop Processor ASUS ROG STRIX X670E-A GAMING WIFI 6E Socket AM5 (LGA 1718) Ryzen 7000 gaming motherboard Geforce RTX 4090 Gaming Trio X - 24GB GDDR6X + META Quest 3 + Controllers + Warthog Throttle, CH Pro Pedals, VKB Gunfighter MKII MCG Pro G.SKILL Trident Z5 Neo Series 64 GB RAM (2 x 32GB) 288-Pin PC RAM DDR5 6000 RAM
Blaze13 Posted March 26, 2015 Author Posted March 26, 2015 Win 7 X64 ( gonna try 8.1) gigabyte z87x-oc force 16BG of ram 4770k Stock Clock 2x GTX 770
docbrown Posted March 27, 2015 Posted March 27, 2015 I've had BSOD with X55 by mapping an infinite loop to one of the buttons. Check the mapping you have for the button that gets stuck and make sure you set a release if you use an advanced command that repeats.
Blaze13 Posted March 27, 2015 Author Posted March 27, 2015 I've had BSOD with X55 by mapping an infinite loop to one of the buttons. Check the mapping you have for the button that gets stuck and make sure you set a release if you use an advanced command that repeats. http://forums.eagle.ru/showthread.php?t=138712 Those are the profiles im currently using form the sounds of it that would sound like the Left Most Wheel for the zoom. I will remove that from the profiler and try it out if thats the case
Blaze13 Posted March 30, 2015 Author Posted March 30, 2015 Bump A hoy. Win 8.1 Same setup same profile for the x55 profiler and in DCSworld , Same bsod in windows. I am now at loss, only thing left is to contact the vendor in my mind unless anybody has any ideas
docbrown Posted April 8, 2015 Posted April 8, 2015 Just wondering blaze, does it happen with any other profile?
Blaze13 Posted April 8, 2015 Author Posted April 8, 2015 Yah it with every profile even the default ones, It looks to be an issue with with xhci on the mobo even when the stick is plugged into usb 2.0 ports
Recommended Posts