chromium Posted June 3, 2015 Posted June 3, 2015 ... I tried to edit a custom monitor setup in many ways, but I haven't been successful. This is the problem: I have 2 monitor: 1. 1280x1024 (on the left), currently secondary monitor. 2. 1920x1080 (on the right), currently primary I use 1 to take notes, use TS, etc etc... I won't DCS to blind this monitor. And I would like to set this one as "primary"... sadly, as soon as this is the primary and regardless of the custom configuration I put in \Config\MonitorSetup\ , DCS work in monitor 1. I want DCS and It's GUI to work in monitor 2, even if I set this one as secondary monitor. any suggestion? thanks ;) Author of DSMC, mod to enable scenario persistency and save updated miz file Stable version & site: https://dsmcfordcs.wordpress.com/ Openbeta: https://github.com/Chromium18/DSMC The thing is, helicopters are different from planes. An airplane by it's nature wants to fly, and if not interfered with too strongly by unusual events or by a deliberately incompetent pilot, it will fly. A helicopter does not want to fly. It is maintained in the air by a variety of forces in opposition to each other, and if there is any disturbance in this delicate balance the helicopter stops flying; immediately and disastrously.
cichlidfan Posted June 3, 2015 Posted June 3, 2015 Your DCS display must be defined in the upper left, in Windows. You can arrange them, physically, anyway you want but you must adhere to the upper left requirement for DCS. ASUS ROG Maximus VIII Hero, i7-6700K, Noctua NH-D14 Cooler, Crucial 32GB DDR4 2133, Samsung 950 Pro NVMe 256GB, Samsung EVO 250GB & 500GB SSD, 2TB Caviar Black, Zotac GTX 1080 AMP! Extreme 8GB, Corsair HX1000i, Phillips BDM4065UC 40" 4k monitor, VX2258 TouchScreen, TIR 5 w/ProClip, TM Warthog, VKB Gladiator Pro, Saitek X56, et. al., MFG Crosswind Pedals #1199, VolairSim Pit, Rift CV1 :thumbup:
Recommended Posts