dotChuckles Posted October 3, 2015 Posted October 3, 2015 I'm finding it very difficult to get the l39 trimmed and stable. Any tips or am I just rubbish? I can normally get the A-10 with it's notorioustly twitchy trim hands off stable, but this is kicking my arse for some reason. [sIGPIC][/sIGPIC]
Cibit Posted October 3, 2015 Posted October 3, 2015 I found I can trim reasonably well but it takes a bit of getting used too, different from a10 or f c3 planes:) i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB
tomjm Posted October 3, 2015 Posted October 3, 2015 I get this too. Constant speed, no adjustment to throttle and I will trim it out, it was stay stable for maybe 10 seconds then begin pulling up. If this is characteristic of the aircraft then I guess I'll just have to accept it but it's hard to deal with when you're trying to look down at the panels and you look up and your 10 degrees pitch.
OnlyforDCS Posted October 3, 2015 Posted October 3, 2015 I get this too. Constant speed, no adjustment to throttle and I will trim it out, it was stay stable for maybe 10 seconds then begin pulling up. If this is characteristic of the aircraft then I guess I'll just have to accept it but it's hard to deal with when you're trying to look down at the panels and you look up and your 10 degrees pitch. You sure you got it completely stable and level? I noticed that I really need to pay attention to the artificial horizon since the plane lacks a digital HUD. Current specs: Windows 10 Home 64bit, i5-9600K @ 3.7 Ghz, 32GB DDR4 RAM, 1TB Samsung EVO 860 M.2 SSD, GAINWARD RTX2060 6GB, Oculus Rift S, MS FFB2 Sidewinder + Warthog Throttle Quadrant, Saitek Pro rudder pedals.
dotChuckles Posted October 3, 2015 Author Posted October 3, 2015 It's like each click moves the stick too much. You end up rocking the wings. Click one way aircraft rolls, click the other way aircraft starts opposite roll. Same story with pitch, you only seem to be able to trim the forces out by accident or sheer luck. Is there a lua entry that controls stick deflection per press? [sIGPIC][/sIGPIC]
tomjm Posted October 3, 2015 Posted October 3, 2015 It's like each click moves the stick too much. You end up rocking the wings. Click one way aircraft rolls, click the other way aircraft starts opposite roll. Same story with pitch, you only seem to be able to trim the forces out by accident or sheer luck. Is there a lua entry that controls stick deflection per press? That's probably correct. Seems a very sensitive control.
504smudge Posted October 3, 2015 Posted October 3, 2015 I'm getting no trim response at all, the trim icon moves, the trim tabs even move in the external model but the plane doesn't respond at all Eagles may soar but weasels don't get sucked into jet engines. https://www.youtube.com/user/504smudge https://www.facebook.com/504smudge
Recommended Posts