Radio Menu key "\" doesn't work-no commands show.

[calys]

Hi, I looked at the old posts but I did not find the solution. I can not contact the control tower with the \ key. Do you know the solution?

 

I have reinstalled the game after several years and are impractical.

Thank you.

 

Inviato dal mio E6653 utilizzando Tapatalk

[Washout]

You'll need to map the mic switch key binds to use the radio's mate. Mic switch positions correspond to different radio's.

 

Hope that helps.

Edited April 8, 2018 by Washout

[calys]

You'll need to map the mic switch key binds to use the radio's mate. Mic switch positions correspond to different radio's.

 

Hope that helps.

I dont understood. Sorry

 

Inviato dal mio E6653 utilizzando Tapatalk

[Washout]

The mic switch is a 5 way hat switch on the A-10's throttle used to switch between the different onboard radio's

 

i.e mic switch forward VHF 1 Transmit, mic switch aft VHF 2 Transmit, mic switch down UHF Transmit .

Edited April 8, 2018 by Washout

[calys]

i.e mic switch forward VHF 1 Transmit, mic switch aft VHF 2 Transmit, mic switch down UHF Transmit .

Thanks I'll try.

 

Inviato dal mio E6653 utilizzando Tapatalk

[calys]

I did not understand if I have to set the joystick configuration or I have to select some bottoms inside the whartdog.

[kylekatarn720]

I did not understand if I have to set the joystick configuration or I have to select some bottoms inside the whartdog.

 

You need to assign buttons to "HOTAS MIC Switch" positions from the "adjust controls" menu inside options. Forward is for vhf am, down is for uhf, and aft is for vhf fm.

 

Edited April 8, 2018 by kylekatarn720

[Eviscerador]

The simplified radio comm key (the "" key) will only activate the ground crew intercom.

 

If you want to talk with the tower, the JTAC or your flight wingmen you need to use the proper radio, set up the frequency and then open up the mic.

 

I will recommend you to use simplified comms (it is in the difficulty menu) until you figure out the different radios, preset frequecies and such.

 

Once you get it it is really easy, but takes a few seconds in the ramp to configure all preset chanels in all the radios.

[calys]

Now it's clear, thanks to everyone. :)

 

Inviato dal mio E6653 utilizzando Tapatalk