Fuelburner Posted May 31, 2018 Posted May 31, 2018 The AOA indexer seems to show the exact opposite as it should ! When to slow or at high AOA it shows the green arrow. When too fast or at low AOAs it shows the red triangle !? Power curve When at flaps full and gear down I’m not able to maintain the speed with level flight and military power !?!? Sorry this is very unrealistic ! The hornet will accelerate even with gear down and flaps full.... Anybody have the same issues !? Gesendet von iPhone mit Tapatalk
VFA41_Lion Posted May 31, 2018 Posted May 31, 2018 No, the AoA is accurate. Think of it like this: green light? GO!!! (you're slow!) Red light? STOP!!! (you're fast!) yellow O? OK! and the flaps issue is known and they're working on it.
David OC Posted May 31, 2018 Posted May 31, 2018 Trim Trim and trim some more.... You could also have to much weight? Lose a few pounds perhaps. i7-7700K OC @ 5Ghz | ASUS IX Hero MB | ASUS GTX 1080 Ti STRIX | 32GB Corsair 3000Mhz | Corsair H100i V2 Radiator | Samsung 960 EVO M.2 NVMe 500G SSD | Samsung 850 EVO 500G SSD | Corsair HX850i Platinum 850W | Oculus Rift | ASUS PG278Q 27-inch, 2560 x 1440, G-SYNC, 144Hz, 1ms | VKB Gunfighter Pro Chuck's DCS Tutorial Library Download PDF Tutorial guides to help get up to speed with aircraft quickly and also great for taking a good look at the aircraft available for DCS before purchasing. Link
Goose_Man Posted May 31, 2018 Posted May 31, 2018 Modifiers Not Registering I have a TM Hotas Flight X stick/throttle and the modifiers are not registering correctly. I will assign button 5 (mod) + POV UP, then if I hit a non-modifier button and then say button 6 (mod) + POV UP it will not register the button combo or it will go back to button 5 + POV UP (not button 6 + POV UP). Also, I can't assign the rocker throttle button as an axis for airbrake. This should be added as it was functional this way for the A-10c.
David OC Posted May 31, 2018 Posted May 31, 2018 (edited) I have a TM Hotas Flight X stick/throttle and the modifiers are not registering correctly. I will assign button 5 (mod) + POV UP, then if I hit a non-modifier button and then say button 6 (mod) + POV UP it will not register the button combo or it will go back to button 5 + POV UP (not button 6 + POV UP). Also, I can't assign the rocker throttle button as an axis for airbrake. This should be added as it was functional this way for the A-10c. Not at home right now to test. I had assigned one button as a modifier in the options for my CH joystick and used it for the flaps up down on different buttons and it was working. Have you assigned a switch command? OR just a modifier? A switch will stay on when clicked, off when clicked again, a modifier will need to be held in. Check you didn't assign it to a switch instead. - Edited May 31, 2018 by David OC i7-7700K OC @ 5Ghz | ASUS IX Hero MB | ASUS GTX 1080 Ti STRIX | 32GB Corsair 3000Mhz | Corsair H100i V2 Radiator | Samsung 960 EVO M.2 NVMe 500G SSD | Samsung 850 EVO 500G SSD | Corsair HX850i Platinum 850W | Oculus Rift | ASUS PG278Q 27-inch, 2560 x 1440, G-SYNC, 144Hz, 1ms | VKB Gunfighter Pro Chuck's DCS Tutorial Library Download PDF Tutorial guides to help get up to speed with aircraft quickly and also great for taking a good look at the aircraft available for DCS before purchasing. Link
Goose_Man Posted June 1, 2018 Posted June 1, 2018 Not at home right now to test. I had assigned one button as a modifier in the options for my CH joystick and used it for the flaps up down on different buttons and it was working. Have you assigned a switch command? OR just a modifier? A switch will stay on when clicked, off when clicked again, a modifier will need to be held in. Check you didn't assign it to a switch instead. - You Sir, I could kiss. Thank you! That's exactly what I did without realizing it.
Recommended Posts