can't contact JTAC

[monkie]

I am unable to get a response from the JTAC on the NTTR map custom misson I created. I've tested the JTAC with other aircraft and it works fine lasing targets for LGB's.

 

I've got both radios on, volumes full, using simple radios and nothing seems to work.

 

Any ideas or tricks to get the M2000 working with JTAC?

 

Running latest Beta, update 6.

[monkie]

Now I can't contact any ATC either using the M2000.

 

Even with the correct frequency dialed in I am noticing the radio text in the top right stays black as if the radio isn't properly tuned.

[Tripleinside]

Had the issue.

Make sure the JTAC's com is set to AM, and that his frequency is in the 200 Mhz range

[monkie]

Ok I tried that, AM, 264, 265, 269

 

I tried from Cold Dark and also Airborne set ups, I set the freq's manually with the dial on the UHF and also let them auto-tune through the easy radio option and nothing is working. I also noticed that the radios are auto-tuning on both the UHF and the V/UHF radios to the freq's so it's trying both radios.

 

Frustrating because other aircraft work fine, the problem is limited to the M2000 right now for me.

 

From reading some bug reports about the radio easy comms option seems to be a problem. I'll do some more testing and see if easy comms is causing the issue.

Edited July 6, 2018 by monkie

[monkie]

It was the Easy Comms option that was causing the issue, once selected off I was able to contact the JTAC.

[Tripleinside]

Thanks for the feedback !