BR55Sevas Posted August 30, 2018 Share Posted August 30, 2018 hmmm, does not Huey has slide ball? You need to sort out number from 0 to ... to some. Put number and each time move slider, untill slide ball moves МиГ-29 Fly by wire СДУ Su-27SM second display panel https://www.youtube.com/embed/videoseries?list=PL_2GGwNpWNp_fKXfRtDhIk8s5Jf4a9XHS http://berkuts.ru Пилотажный сервер с роботом | Aerobatic server with PhantomControl Link to comment Share on other sites More sharing options...
Simicro Posted August 30, 2018 Share Posted August 30, 2018 Understood. I'll try to get you the number. - Tony - . My Reviews: Oilfield Campaign - Argo Campaign l My Mission: Huey Ramp Start Voice-Over New! . Microsoft Force Feedback 2 base modded with a CH Fighterstick - VKB Sim T-Rudder Mk.IV Pedals . Intel i5 4670K @4.3 GHz - 32 Gb DDR3 - MSI GTX 1080 - ASUS PG278QR 27" 2K @165 Hz G-Sync Link to comment Share on other sites More sharing options...
Simicro Posted August 30, 2018 Share Posted August 30, 2018 hmmm, does not Huey has slide ball? So for the Huey you need Turn and slip indicator (and not ADI) number? ;) - Tony - . My Reviews: Oilfield Campaign - Argo Campaign l My Mission: Huey Ramp Start Voice-Over New! . Microsoft Force Feedback 2 base modded with a CH Fighterstick - VKB Sim T-Rudder Mk.IV Pedals . Intel i5 4670K @4.3 GHz - 32 Gb DDR3 - MSI GTX 1080 - ASUS PG278QR 27" 2K @165 Hz G-Sync Link to comment Share on other sites More sharing options...
BR55Sevas Posted August 30, 2018 Share Posted August 30, 2018 Yes, exactly. Just downloaded manual and found it. I think arg number should be in some first decades 0 - 30 МиГ-29 Fly by wire СДУ Su-27SM second display panel https://www.youtube.com/embed/videoseries?list=PL_2GGwNpWNp_fKXfRtDhIk8s5Jf4a9XHS http://berkuts.ru Пилотажный сервер с роботом | Aerobatic server with PhantomControl Link to comment Share on other sites More sharing options...
Simicro Posted August 30, 2018 Share Posted August 30, 2018 132 makes the needle move. I have not found yet for the ball. - Tony - . My Reviews: Oilfield Campaign - Argo Campaign l My Mission: Huey Ramp Start Voice-Over New! . Microsoft Force Feedback 2 base modded with a CH Fighterstick - VKB Sim T-Rudder Mk.IV Pedals . Intel i5 4670K @4.3 GHz - 32 Gb DDR3 - MSI GTX 1080 - ASUS PG278QR 27" 2K @165 Hz G-Sync Link to comment Share on other sites More sharing options...
Simicro Posted August 30, 2018 Share Posted August 30, 2018 And the ball is 133. The needle is 132 (see my post on the previous page). - Tony - . My Reviews: Oilfield Campaign - Argo Campaign l My Mission: Huey Ramp Start Voice-Over New! . Microsoft Force Feedback 2 base modded with a CH Fighterstick - VKB Sim T-Rudder Mk.IV Pedals . Intel i5 4670K @4.3 GHz - 32 Gb DDR3 - MSI GTX 1080 - ASUS PG278QR 27" 2K @165 Hz G-Sync Link to comment Share on other sites More sharing options...
BR55Sevas Posted August 30, 2018 Share Posted August 30, 2018 Thank you Simicro! МиГ-29 Fly by wire СДУ Su-27SM second display panel https://www.youtube.com/embed/videoseries?list=PL_2GGwNpWNp_fKXfRtDhIk8s5Jf4a9XHS http://berkuts.ru Пилотажный сервер с роботом | Aerobatic server with PhantomControl Link to comment Share on other sites More sharing options...
Simicro Posted August 30, 2018 Share Posted August 30, 2018 You are most welcome, mate :thumbup: - Tony - . My Reviews: Oilfield Campaign - Argo Campaign l My Mission: Huey Ramp Start Voice-Over New! . Microsoft Force Feedback 2 base modded with a CH Fighterstick - VKB Sim T-Rudder Mk.IV Pedals . Intel i5 4670K @4.3 GHz - 32 Gb DDR3 - MSI GTX 1080 - ASUS PG278QR 27" 2K @165 Hz G-Sync Link to comment Share on other sites More sharing options...
BR55Sevas Posted August 30, 2018 Share Posted August 30, 2018 (edited) Here the build for Huey only. 1. Clear ingame rudder axis 2. Manually create Saved Games\DCS\Scripts folder 3. Assign Saved Games\DCS\ folder in first line bottom bar 4. Assign physical rudder in AutoRudder 5. Restart AutoRudder When running AutoRudder there are should not be any error about export.lua Run as Administrator, and allow it to use network routine. also good to add exe to safe area of your antivirus software. 6. set Kp = 300 Ki = 1000 Kd =0 this tested with Mi-8 and I think for Huey also would work correct Edited September 3, 2018 by BR=55=Sevas МиГ-29 Fly by wire СДУ Su-27SM second display panel https://www.youtube.com/embed/videoseries?list=PL_2GGwNpWNp_fKXfRtDhIk8s5Jf4a9XHS http://berkuts.ru Пилотажный сервер с роботом | Aerobatic server with PhantomControl Link to comment Share on other sites More sharing options...
Simicro Posted August 30, 2018 Share Posted August 30, 2018 My software uses PID-controller for nulling the craft slide. Impressive software! And congratulations for adapting it for the Huey :thumbup: - Tony - . My Reviews: Oilfield Campaign - Argo Campaign l My Mission: Huey Ramp Start Voice-Over New! . Microsoft Force Feedback 2 base modded with a CH Fighterstick - VKB Sim T-Rudder Mk.IV Pedals . Intel i5 4670K @4.3 GHz - 32 Gb DDR3 - MSI GTX 1080 - ASUS PG278QR 27" 2K @165 Hz G-Sync Link to comment Share on other sites More sharing options...
BR55Sevas Posted August 30, 2018 Share Posted August 30, 2018 Does it works correct? I'm aware about axis direction. What about wagging the tail? МиГ-29 Fly by wire СДУ Su-27SM second display panel https://www.youtube.com/embed/videoseries?list=PL_2GGwNpWNp_fKXfRtDhIk8s5Jf4a9XHS http://berkuts.ru Пилотажный сервер с роботом | Aerobatic server with PhantomControl Link to comment Share on other sites More sharing options...
Simicro Posted August 30, 2018 Share Posted August 30, 2018 To be honest, I don't fly auto-rudder. I simply wanted to express my respect to you for developing a software with such a functionality for guys who need auto-rudder. I think now is the time for BlackeyCole to do his part and test the software ;) - Tony - . My Reviews: Oilfield Campaign - Argo Campaign l My Mission: Huey Ramp Start Voice-Over New! . Microsoft Force Feedback 2 base modded with a CH Fighterstick - VKB Sim T-Rudder Mk.IV Pedals . Intel i5 4670K @4.3 GHz - 32 Gb DDR3 - MSI GTX 1080 - ASUS PG278QR 27" 2K @165 Hz G-Sync Link to comment Share on other sites More sharing options...
BR55Sevas Posted August 30, 2018 Share Posted August 30, 2018 Thanks, I have a lot stuff like that. DCS programming help me got PhD :smartass: And yes, we need to know Blacley feedback. МиГ-29 Fly by wire СДУ Su-27SM second display panel https://www.youtube.com/embed/videoseries?list=PL_2GGwNpWNp_fKXfRtDhIk8s5Jf4a9XHS http://berkuts.ru Пилотажный сервер с роботом | Aerobatic server with PhantomControl Link to comment Share on other sites More sharing options...
BlacleyCole Posted August 31, 2018 Author Share Posted August 31, 2018 Ias soon as I m able to check outwhat I did wrong to see if it fixes it I’ll post it had other problems lately with reguardsto rl BlackeyCole 20years usaf XP-11. Dcs 2.5OB Acer predator laptop/ i7 7720, 2.4ghz, 32 gb ddr4 ram, 500gb ssd,1tb hdd,nvidia 1080 8gb vram New FlightSim Blog at https://blackeysblog.wordpress.com. Go visit it and leave me feedback and or comments so I can make it better. A new post every Friday. Link to comment Share on other sites More sharing options...
BlacleyCole Posted August 31, 2018 Author Share Posted August 31, 2018 (edited) Ok I located the scripts directory under th s I the saved. Games path it wrote the export directory if I undstand thing right y. H time stamp. My problem was I never gave the three variables a value. Tried it Samy’s old spinning. So ent back in to the rudder control app gave it the variables shown in your image of the app then went back and redesinated the saved games/dcs/scripts directory hoping it would resale the export.lua file but it didn’t . How do I update the export.lua file after the intial version from rudder control. I’m going to try and delegate the export.lua file rerun the rudder control app and recreate the file with the intial variables but if I need to adjust I may need help plus I’m un sure does the rudder control app need to be running while dcs is to get the effect or is it what it does in the export file the workhorse? Also if you can explain each of the variables on the first tab to how it will effect the rudder process or rather lack of rudder. If it’s doing this set this here if it is doing that redo this number by ? Etc Deleting the file did work. Creating a blank doesn’t work need a button to use to. Write the file or update it after the intial setup. Also since I have srs I believe it created a scrips folder under dcs/scripts so it looks like this dcs/scripts/scripts and it has a export.lus file in it but I believe the rudder control updated the export.lua in the upper folder because there was a backup of the export.lua there. I hope this helps some with you plan to get it to work and if you need me to try another aircraft so we can configure the same and tweak it then go to the huey we can as I own all the mods. Edited August 31, 2018 by BlacleyCole BlackeyCole 20years usaf XP-11. Dcs 2.5OB Acer predator laptop/ i7 7720, 2.4ghz, 32 gb ddr4 ram, 500gb ssd,1tb hdd,nvidia 1080 8gb vram New FlightSim Blog at https://blackeysblog.wordpress.com. Go visit it and leave me feedback and or comments so I can make it better. A new post every Friday. Link to comment Share on other sites More sharing options...
BR55Sevas Posted August 31, 2018 Share Posted August 31, 2018 (edited) export.lua recreates each time you run AutoRudder, all you need just to correct asign path to saved games\DCS Notice that this path doesnt have Scripts folder and then after restart AutoRudder check if export.lua creates in saved games\DCS\Scripts AutoRudder must be run when you want to fly in DCS. Restart AutoRudder each time you reassign path Edited August 31, 2018 by BR=55=Sevas МиГ-29 Fly by wire СДУ Su-27SM second display panel https://www.youtube.com/embed/videoseries?list=PL_2GGwNpWNp_fKXfRtDhIk8s5Jf4a9XHS http://berkuts.ru Пилотажный сервер с роботом | Aerobatic server with PhantomControl Link to comment Share on other sites More sharing options...
BR55Sevas Posted August 31, 2018 Share Posted August 31, 2018 (edited) Also since I have srs I believe it created a scrips folder under dcs/scripts so it looks like this dcs/scripts/scripts and it has a export.lus file in it but I believe the rudder control updated the export.lua in the upper folder because there was a backup of the export.lua there. Again In AutoRudder you assign Saved Games\DCS folder! Not Saved Games\DCS\Scripts The best feedback from you is go through this https://forums.eagle.ru/showpost.php?p=3611251&postcount=34 step by step instructions and each step describe what you`ve done and confirm there are no any errors Edited August 31, 2018 by BR=55=Sevas МиГ-29 Fly by wire СДУ Su-27SM second display panel https://www.youtube.com/embed/videoseries?list=PL_2GGwNpWNp_fKXfRtDhIk8s5Jf4a9XHS http://berkuts.ru Пилотажный сервер с роботом | Aerobatic server with PhantomControl Link to comment Share on other sites More sharing options...
BlacleyCole Posted August 31, 2018 Author Share Posted August 31, 2018 Ok I wii return it to the dcs folder I must have. Misread your instructions I missed that single post somehow BlackeyCole 20years usaf XP-11. Dcs 2.5OB Acer predator laptop/ i7 7720, 2.4ghz, 32 gb ddr4 ram, 500gb ssd,1tb hdd,nvidia 1080 8gb vram New FlightSim Blog at https://blackeysblog.wordpress.com. Go visit it and leave me feedback and or comments so I can make it better. A new post every Friday. Link to comment Share on other sites More sharing options...
Recommended Posts