Problem with RAMP Start From the last OB Version

[assafm25]

Hi all ,

 

 

I have problem with cold start from the last OB version .

 

As i know after starting ENG R i need to Power On L/R DDI , MPFCD , HUD.

I found that when R ENG is running i can power on only R DDI and HUD .

After ENG L is running i can Power up Left DDI and MPFCD .

 

 

Did i miss something :(

[BarTzi]

Works fine for me. Attach a track so we can have a look. Also- it's called AMPCD.

[Doum76]

No issues on my side either like BarTzi, as he said, a track would be helpful.

[raelias]

sounds like a bus tie problem, gimme a minute let me open the sim to take a look at the pit

 

edit 1: is your battery switch by any chance in override?

 

edit 2: I managed to reproduce your problem by setting the battery switch to either off or oride (down, left mouse click) after R eng start, doing so closes the bus tie making the right gen unable to supply the "left side bus" (is it the utility bus?). anyways, make sure you have your bat switch in the ON position (up, right mouse click) and let me know if it fixes it

 

Also you should be able to spot this issue on the amps meter to the left of the left gen switch, with the bus tie working and one engine running both needles should be up

 

Good luck and if the problem persists post me a screenshot of your cockpit with the issue please, also attach a track if possible

Edited September 9, 2018 by raelias

[assafm25]

Thank u all

 

I did use the Override Batt .

I found that i switch to it in the Tests Process .