Shepherd Posted January 17, 2019 Posted January 17, 2019 Is there anyway to disable the comms menu from toggling on and off every time i use a PTT switch on my hotas. I am trying to settup voice-attack and have disabled menus in viacom pref and no dice, even without voicettack on when i press a mic switch the comms menu toggles on and off.
Cake Posted January 17, 2019 Posted January 17, 2019 Can you just go to controller settings and remote be the comm keybinds for that switch on your HOTAS? 6700K@4.6 48Gb - 1080Ti Hybrid - Warthog - RIFT
Shepherd Posted January 17, 2019 Author Posted January 17, 2019 (edited) Hey Cake, not sure I follow you. Should the comms menu toggle on and off when a mic switch is pressed or is mine porked? Edited January 17, 2019 by Shepherd
David OC Posted January 17, 2019 Posted January 17, 2019 Yes it will open the comms menu. The commands are --> Comms switch --> F1 - F3 - F5 -. Etc I have not set this up for a while, I do remember setting a clear command when the menu got stuck open. Clear - which would turn the comm's menu back off. I think I had it set to comms switch (You open the menu) then the program would run (2 Hold position) and finish with (\) comms to close the menu I think. i7-7700K OC @ 5Ghz | ASUS IX Hero MB | ASUS GTX 1080 Ti STRIX | 32GB Corsair 3000Mhz | Corsair H100i V2 Radiator | Samsung 960 EVO M.2 NVMe 500G SSD | Samsung 850 EVO 500G SSD | Corsair HX850i Platinum 850W | Oculus Rift | ASUS PG278Q 27-inch, 2560 x 1440, G-SYNC, 144Hz, 1ms | VKB Gunfighter Pro Chuck's DCS Tutorial Library Download PDF Tutorial guides to help get up to speed with aircraft quickly and also great for taking a good look at the aircraft available for DCS before purchasing. Link
Shepherd Posted January 17, 2019 Author Posted January 17, 2019 (edited) Yes it will open the comms menu. The commands are --> Comms switch --> F1 - F3 - F5 -. Etc I have not set this up for a while, I do remember setting a clear command when the menu got stuck open. Clear - which would turn the comm's menu back off. I think I had it set to comms switch (You open the menu) then the program would run (2 Hold position) and finish with (\) comms to close the menu I think. Well that makes sense then. I will just configure viacom to register \ once at the depress of the mic switch and that should do the trick. thanks. Edited January 17, 2019 by Shepherd
Recommended Posts