Captain Slow Posted February 18, 2019 Share Posted February 18, 2019 Reproducible: 100% Date: 2018-02-19 0000Z Sim version: 2.5.4.27314 Open Beta Mission: Any Steps to reproduce: 1. Enter HACQ mode 2. Press Sensor ctrl aft 3. Nothing happens 4. Enter any other ACM mode (such as WACQ) 5. press sensor ctrl aft 6. Now you are in Vertical scan mode Problem: It is not possible to enter vertical scan from HACQ mode, and HACQ mode being the default ACM mode if HMD is on, this causes some frustration Track: Track attached Desired solution: Pressing sensor ctl aft in HACQ mode should take you to Vertical Scan mode SP/MP: Affects both. System spec: Tested on multiple systems with same result. Controllers: Tested on multiple systems with same result.cannot enter vertical scan from hacq.trk Link to comment Share on other sites More sharing options...
Tholozor Posted February 19, 2019 Share Posted February 19, 2019 Already reported and declared working as intended; VACQ and WACQ modes are disabled while the HMD is active. https://forums.eagle.ru/showthread.php?t=229544 REAPER 51 | Tholozor VFA-136 (c.2007): https://www.digitalcombatsimulator.com/en/files/3305981/ Arleigh Burke Destroyer Pack (2020): https://www.digitalcombatsimulator.com/en/files/3313752/ Link to comment Share on other sites More sharing options...
Captain Slow Posted February 19, 2019 Author Share Posted February 19, 2019 Already reported and declared working as intended; VACQ and WACQ modes are disabled while the HMD is active. https://forums.eagle.ru/showthread.php?t=229544 Strange. Both modes are still available and work. It's only vacq that takes one extra step to enter. Vacq may be unnecessary but wacq certainly is useful to reacquire targets after being on defensive. Is the intention to remove both entirely in a future patch? I suppose if that is what the real thing does then so be it :( Link to comment Share on other sites More sharing options...
Recommended Posts