Swordfish Posted March 23, 2019 Posted March 23, 2019 Hi, dunno if its just me, I cannot get the pipper or fixed net sight to appear on the ASP sight. I have turned on all relevant switches, played with brightness - nothing. This is only on cold start - no problems with hot start
Кош Posted March 23, 2019 Posted March 23, 2019 https://leatherneck-sim.mantishub.io/view.php?id=889 Reported. ППС АВТ 100 60 36 Ф < | > ! ПД К i5-10600k/32GB 3600/SSD NVME/4070ti/2560x1440'32/VPC T-50 VPC T-50CM3 throttle Saitek combat rudder
crcr7 Posted March 25, 2019 Posted March 25, 2019 (edited) +1 [Edit - I think it's related to the aux inverter switch as you can now blank out the gun sight (from a hot start situation) by turning the aux inverter on] Edited March 25, 2019 by crcr7 additional info
QuiGon Posted March 25, 2019 Posted March 25, 2019 That's weird. I was just fflying the MiG-21 yesterday (Open Beta), and the pipper came on just fine. :huh: Intel i7-12700K @ 8x5GHz+4x3.8GHz + 32 GB DDR5 RAM + Nvidia Geforce RTX 2080 (8 GB VRAM) + M.2 SSD + Windows 10 64Bit DCS Panavia Tornado (IDS) really needs to be a thing!
Кош Posted March 25, 2019 Posted March 25, 2019 That's weird. I was just fflying the MiG-21 yesterday (Open Beta), and the pipper came on just fine. :huh: Start cold and dark, connect external power, set up everything with engine still of and gunsight started working? In my case it only illuminates its scales, but the piper is absent, so as fixed net. ППС АВТ 100 60 36 Ф < | > ! ПД К i5-10600k/32GB 3600/SSD NVME/4070ti/2560x1440'32/VPC T-50 VPC T-50CM3 throttle Saitek combat rudder
VC Posted March 25, 2019 Posted March 25, 2019 I had this issue a while ago but then it stopped happening. I only use Auto-start, after that I flick all the weapon switches, then ASP net and pipper come on fine. Maybe you're breaking it by turning the engine on with ASP already on? VC =X51= Squadron is recruiting! X51 website: https://x51squadron.com/ Join our Discord: https://discord.gg/d9JtFY4
Кош Posted March 25, 2019 Posted March 25, 2019 (edited) I use only cold and dark mission start. Never use autostart. The real world procedure to check the sight before starting the engine. The sight is obviously receiving power as wingspan, range, ballistic knob scales illuminate. But fixed net and piper don't appear until engine is started which is wrong and strange as engine doesn't support the ASP with anything the ground power and onboard inverters can not. Oh, and if I turn the engine on after all that, the sight scales appear on the reflector without touching anything sight or generally avionics related. Like projector has a separate power line than the sight in general, and that power line goes straight to the generator only. Edited March 25, 2019 by Кош ППС АВТ 100 60 36 Ф < | > ! ПД К i5-10600k/32GB 3600/SSD NVME/4070ti/2560x1440'32/VPC T-50 VPC T-50CM3 throttle Saitek combat rudder
karaco39 Posted March 30, 2019 Posted March 30, 2019 Mission, hit by ZSU, cone damaged and sight went off. I landed, AC cold, repair requested and repaired. I did normal start up as usually but sight not available.
Recommended Posts