MYSE1234 Posted May 1, 2019 Posted May 1, 2019 The radar stick axis are not analogue, is this accurate? The maverick slewing is as expected analouge, while the radar behaves more like a button (on/off). The wierd thing is that they both use the same stick, but work in totaly different ways. I've tried changing the curves for the axis but nothing really changes, other than that it starts slewing a bit later. Viggen is love. Viggen is life. 7800X3D | RTX 4070 Ti S | 64GB 6000MHz RAM |
some1 Posted May 1, 2019 Posted May 1, 2019 It's an old bug that I reported years ago... You can't even move the radar cursor diagonally. It's either moving left/right or up/down. Hardware: VPForce Rhino, FSSB R3 Ultra, Virpil WarBRD, Hotas Warthog, Winwing F15EX, Slaw Rudder, GVL224 Trio Throttle, Thrustmaster MFDs, Saitek Trim wheel, Trackir 5, Quest Pro
mrkline Posted May 2, 2019 Posted May 2, 2019 Is this a bug, or how the stick actually operated? It makes it quite hard to accurately place marks if you're moving at a decent airspeed.
some1 Posted May 2, 2019 Posted May 2, 2019 Hard to believe they installed a big stick in the cockpit, which could only work in ON/OFF fashion. IIRC the Mavs (sorry, RB 75) were not even part of the original design, they were a later addition. So initially the stick sole purpose was to control the radar. Hardware: VPForce Rhino, FSSB R3 Ultra, Virpil WarBRD, Hotas Warthog, Winwing F15EX, Slaw Rudder, GVL224 Trio Throttle, Thrustmaster MFDs, Saitek Trim wheel, Trackir 5, Quest Pro
hideki2 Posted May 2, 2019 Posted May 2, 2019 Yeah, I have also reported that a really long time ago.
SGT Coyle Posted July 13, 2019 Posted July 13, 2019 I dread adding another thread, so I'm putting this hear to sound out any experience out there. I assigned the Radar Stick axis to my TM mini stick. The mini stick axis are working, But I can't get any response for the Radar or the EP-13 (RB-75 sight). Are the axis for the Radar Stick working or is it keyboard inputs only? I'm working with Release 2.5.5.33184 Night Ops in the Harrier IYAOYAS
TOViper Posted July 13, 2019 Posted July 13, 2019 I dread adding another thread, so I'm putting this hear to sound out any experience out there. I assigned the Radar Stick axis to my TM mini stick. The mini stick axis are working, But I can't get any response for the Radar or the EP-13 (RB-75 sight). Are the axis for the Radar Stick working or is it keyboard inputs only? I'm working with Release 2.5.5.33184 Ever since I am using my top right located coolie-hat from my stick. This was CH Flightstick Pro USB earlier and CH Combat Stick USB these days. Works like a charm. Visit https://www.viggen.training ...Viggen... what more can you ask for? my computer: AMD Ryzen 5600G 4.4 GHz | NVIDIA RTX 3080 10GB | 32 GB 3.2 GHz DDR4 DUAL | SSD 980 256 GB SYS + SSD 2TB DCS | TM Warthog Stick + Throttle + TRP | Rift CV1
SGT Coyle Posted July 14, 2019 Posted July 14, 2019 Ever since I am using my top right located coolie-hat from my stick. This was CH Flightstick Pro USB earlier and CH Combat Stick USB these days. Works like a charm. Thanks for the reply. I got the axis assignments to work. The issue was not the axis assignments but some confusion as to the trigger switch operation. I'll take that to a different thread. Night Ops in the Harrier IYAOYAS
Recommended Posts