Acriculor Posted June 5, 2019 Posted June 5, 2019 Я, когда зашумели резюки, заменил их на датчики холла ss495a, воткнул магниты от купленных в магазине пластиковых бабочек, и подвел к холлам питание с платы контроллера.
vvm13 Posted June 9, 2019 Posted June 9, 2019 (edited) На всякий случай (вдруг кому-то интересно): https://forums.eagle.ru/showthread.php?t=220916 (тема называется TM Cougar sealed magnetoresistive/ hall sensor kits), но внутри первого поста есть CH Pro Throttle, CH Fighterstick, CH Combatstick, CH Pro Pedals etc. magnetoresistive sensors The cool thing about these MR sensors is that they replace the standard CH pots 1 to 1, but contrary to them they work contactless. That means you can simply connect these sensors to your CH mainboard and done. You will never have to worry about deteriorating or dirty pots again. The CH Control Manager recognizes this sensor normally and you can calibrate it within the software. For installation you can simply pinch the original crimp connectors a bit with a pair of pliers, but I always recommend soldering! Then just stick them ontop of the header pins and your good to go. Your wire colors will be different since this is a gameport CH Pro Throttle. On the sensor PCB the pins are labled as GND, OUT and VCC. For the USB CH Pro Throttle green = GND, yellow = OUT and blue = VCC. Price is 20€ + 6.5€ tracked & insured international shipping Саму тему я только начал читать. Автор сейчас забаненный, но, судя по профайлу, форум и сейчас посещает. Edited June 9, 2019 by vvm13
Recommended Posts