MBot Posted August 11, 2019 Posted August 11, 2019 The electric trim switches on the left side panel are permanent switches (a left click switches them one state to the left, a right switch one state to the right). I am having big troubles using the rudder trim, because the clickable area moves with the moving switch. In practice this means that when I want to trim slight left rudder, I click left to move the switch left, adjust the mouse left the follow the switch and then click right to move the switch to the center position again. By the time I have completed this I have usually severely over-trimmed. I then repeat the proceed to trim right again, again over-trimming. Then left again etc. Since I have to move the mouse between using left and right mouse button, I am never fast enough for the precise amount of trim I require. To improve usability with the mouse I suggest to make the switches momentarily: The switch moves left/right as long as I hold down left/right mouse button and moves to center again when I release.
TOViper Posted August 11, 2019 Posted August 11, 2019 To improve usability with the mouse I suggest to make the switches momentarily: The switch moves left/right as long as I hold down left/right mouse button and moves to center again when I release. If HB would implement it like this I would be very happy too. Visit https://www.viggen.training ...Viggen... what more can you ask for? my computer: AMD Ryzen 5600G 4.4 GHz | NVIDIA RTX 3080 10GB | 32 GB 3.2 GHz DDR4 DUAL | SSD 980 256 GB SYS + SSD 2TB DCS | TM Warthog Stick + Throttle + TRP | Rift CV1
Recommended Posts