Doc Blues Posted November 11, 2020 Posted November 11, 2020 I've completed a new computer build, and have installed and set up Voice Attack and Vaicom Pro. From the first attempt to use, I'm now having an issue after saying a command. For example, for carrier landing, VA says "Recognize Inbound" but then it says "(awaiting additional input). I had this insatlled on the old computer, and it worked like a champ, never received that notation before. I have tried deleting the Export..lua from the saved games folder, but this did not fix the issue. I reviewed the settings on Vaicom and VA, everything appears to be set correctly. I just have no idea what "additional input" it is awaiting i did post this on the Vaicom Pro topic but no response. Any Ideas would be welcome. Thnaks, Mike
Drac Posted November 11, 2020 Posted November 11, 2020 You may already done this , but did you go through the "Finish" process?
Doc Blues Posted November 13, 2020 Author Posted November 13, 2020 Yes, did the finish process at setup, and just did it again, no change. I say "inbound", VA posts "recognized Inbound", "received Inbound", "awaiting additional input".
sharkfin61 Posted November 13, 2020 Posted November 13, 2020 Do you have the ‚Force callsigns‘ box ticked? Maybe it‘s waiting for the callsign and name of the airfield? Gesendet von iPad mit Tapatalk Loads do it on the fly! Royal Bavarian Airforce all the way RIG: RYZEN 7 5800X3D~ ZOTAC 4080 Super ~ AORUS X570S Elite AX ~64 GB Corsair Venegance DDR-4 3600 ~ BeQuiet AIO Silent loop 2 360 watercooled ~ Samsung 890 Pro M.2 (2TB) + 870 EVO (1TB) SSD ~ WIN 10 64-bit ~ AOC 31.5" Gaming 144Hz Display ~ DelanClip@TrackIR 5 ~ TM Warthog no.2 ~Saitek rudder pedals~ 2 TM MFDs on 2nd 27"display ~ Buddyfox A-10 UFC ~ CDU/AAP panel via DCSBios ~ ARC-210 (soldering WIP) ~ QUEST 3
Doc Blues Posted November 14, 2020 Author Posted November 14, 2020 I tried ticking the force callsign box, but still the same problem...awaiting additional input. I'm doing carrier landings, and the radio is set to their frequency. However, after the Inbound call, I get awaiting additional input. Before, on my old computer, I simply said "Inbound" and the carrier responded. One at 3 mile, I called "overhead" and again got the responce with "your signal is Charley". Once on final, called "Hornet ball", received roger ball, along with instructions from Paddles. There has to be something simple I overlooked, and screwed up during program instal, I just cant figure out what. I may just uninstall, and reinstall both Voice Attack, and Vaicom Pro.
Drac Posted November 16, 2020 Posted November 16, 2020 I tried ticking the force callsign box, but still the same problem...awaiting additional input. I'm doing carrier landings, and the radio is set to their frequency. However, after the Inbound call, I get awaiting additional input. Before, on my old computer, I simply said "Inbound" and the carrier responded. One at 3 mile, I called "overhead" and again got the responce with "your signal is Charley". Once on final, called "Hornet ball", received roger ball, along with instructions from Paddles. There has to be something simple I overlooked, and screwed up during program instal, I just cant figure out what. I may just uninstall, and reinstall both Voice Attack, and Vaicom Pro. I had the same issue. What I found out in my case is that I had to say for example, "Roosevelt...Inbound". I have the Supercarrier module.
Recommended Posts