Attack Radar and RWR Triangles at top of display.

[Badger633]

I am probably missing something basic here but would appreciate a little help. My issue is as follows :

 

1.0  When flying the Hornet from a hot start the radar operates fine. What I mean by this is on the Radar attack page you not only do you get aircraft icons but at the top of the display you get RWR yellow triangles indicating beams from other aircraft. All good. If I go into the  data page at the top left button 5 there is "RWR ATTK" button by which you can switch the triangles on and off.  All Good.

2.0  When I perform a cold start  I will activate the RWR and also the radar. However I never see the triangles at the top of the radar page and when I go to the radar data page the "RWR ATTK"  button 5 is not there to select them on and off.  Obviously something I am doing or not doing when activating these devices.

3.0  Experimenting I started in a hot start so the the radar was fine showing the RWR triangles at the top. I then switched off the RWR system. The triangles obviously disappeared as there was no feed from the RWR system. But when I switched the RWR system on again ( trying with RWR  HUD display on and off)  the RWR triangles do not appear again on the radar display and also the "RWR ATTK" button has disappeared  from the radar data page on button 5 so cannot turn the RWR triangles on.

 

I am obviously missing something obvious, any help much appreciated.

 

Cheers

[ZMEY-HS-]

[Badger633]

Hi ZMEY-HS-

 

Thanks very much  for this .  It is much appreciated.

 

Cheers

 

Glyn