Jump to content

Gallery


6S.Duke

Recommended Posts

  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...

nullCustom Skin, any chance to get the backseat enabled on the 339APAN?? 

in flight you can go to the back seat, but for flying with another pilot while doing aerobatics it would be great if it is enabled.

image.png

  • Like 1

I5 8600K  - MSI 3070 - 32Gb DDR4  - 1 TB NVME - 1TB SSD - :joystick: TM Warthog

FC3 - Mirage - Hawk (RIP) - F5E - L39 - F14B -A4E C- UH1H - AV8BNA - F16C - FA-18C - Ka50- Apache-A10CII - MB339

[sIGPIC][/sIGPIC]

Link to comment
Share on other sites

  • 1 month later...
nullCustom Skin, any chance to get the backseat enabled on the 339APAN?? 
in flight you can go to the back seat, but for flying with another pilot while doing aerobatics it would be great if it is enabled.
image.thumb.png.d624dc4733c14d48b59e39027e3da72c.png
You can.
In your mission you have to unselect "solo" under the aircraft special option of the mission editor

Inviato dal mio ASUS_I005D utilizzando Tapatalk

  • Like 2
Link to comment
Share on other sites

  • 3 weeks later...
  • 4 weeks later...
  • 4 weeks later...
Il 31/3/2023 at 11:40, gulredrel ha scritto:

Don't know how the Aussies got to Nevada... but they had fun.

Screen_230331_180719.jpg?raw=1

Screen_230331_180742.jpg?raw=1

Screen_230331_182657.jpg?raw=1

Screen_230331_185626.jpg?raw=1

Screen_230331_190813.jpg?raw=1

Screen_230331_190825.jpg?raw=1

Screen_230331_190938.jpg?raw=1

Thanks to @Strider32 for the huge skin pack. 🙇‍♂️

Nice pics!!  I tried to open the canopy like in the second picture, but the little metal pin doesnt move.... how do you do that?

Link to comment
Share on other sites

37 minutes ago, Bigskill said:

Nice pics!!  I tried to open the canopy like in the second picture, but the little metal pin doesnt move.... how do you do that?

First: unlock the open canopy.

Second: Click on the little canopy clamp (in manual named "canopy partially closed position device"). This will position the canopy in the partially open position. Clicking the clamp again will close it fully.

Same works wen coming from the closed position. I noticed, that the click spot on the clamp is only active, when the canopy is not locked open / locked closed.

Screen_20230426_canopy.jpg?raw=1

 

Hope this helps.

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...
Il 26/4/2023 at 01:10, gulredrel ha scritto:

First: unlock the open canopy.

Second: Click on the little canopy clamp (in manual named "canopy partially closed position device"). This will position the canopy in the partially open position. Clicking the clamp again will close it fully.

Same works wen coming from the closed position. I noticed, that the click spot on the clamp is only active, when the canopy is not locked open / locked closed.

Screen_20230426_canopy.jpg?raw=1

 

Hope this helps.

Im going to try again, I sweat I tried from open and from closed position, nada.

Link to comment
Share on other sites

  • 4 weeks later...

Rocket salvo attack on this row of containers 36°43'10.6"N 115°39'15.7"W.

Screen_230603_190526.jpg?raw=1

RTB

Screen_230603_190753.jpg?raw=1

touchdown imminent

Screen_230603_191801.jpg?raw=1

a bit fast in the turn...

Screen_230603_192032.jpg?raw=1

Internal fuel only is so low. I had to refuel at Creech to be able to get back to Nellis, after flying multiple attack runs at the target range.

  • Like 4
Link to comment
Share on other sites

  • 5 months later...
Il 3/6/2023 at 13:03, gulredrel ha scritto:

Rocket salvo attack on this row of containers 36°43'10.6"N 115°39'15.7"W.

Screen_230603_190526.jpg?raw=1

RTB

Screen_230603_190753.jpg?raw=1

touchdown imminent

Screen_230603_191801.jpg?raw=1

a bit fast in the turn...

Screen_230603_192032.jpg?raw=1

Internal fuel only is so low. I had to refuel at Creech to be able to get back to Nellis, after flying multiple attack runs at the target range.

When I fly on MP servers, Greyflag or Enigma I never fly withouth the bigger tip fuel tank.....

Link to comment
Share on other sites

  • 2 months later...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...