Solved [not a DCS problem] - Su-27 trim not working

[Zohardv]

Hi all.

After updating to the latest version of Open beta I find that the trimmer on the su-27 does not actually do anything.

I used the controls on screen overlay to make sure my trim commands are ok. When I trim to either pitch or bank, there's no actual response from the control surfaces. Screen layout shows the trimmer is moving as commanded, but there's no change in the flight direction or the airplane's attitude. Also both "pitch trim center" and "roll trim center" indicator lights on the front console are illuminated, although I move the trimmer all around. Finally stick to trim (LCTRL+LSHFT+T) seems also unresponsive.

Track file attached.

 

Thanks,

Zohardv

su27 trim unresponsive.trk

Edited July 1, 2021 by Zohardv

[Ashayar]

Hello,

 

Maybe I'm wrong, but I had problems with trimming when I started DCS, and it appeared that the box about Force FeedBack joystick was checked in the option menus. I unchecked it and my problem was solved. Did you check that option?

[Zohardv]

Hi.

I found the problem. Apparently there was vJoy device installed and it was interfering with my joystick input. I removed it and everything works fine now.

Please ignore.

[ser_igel]

it's not a DCS problem but i had the same and thank you for providing the solution