Bulldog_1 Posted October 4, 2021 Posted October 4, 2021 Is there a way to program the Cube Sim RDR to use an axis instead of a button? If not, is there a way to program it to scroll one line at a time instead of three? 1 Digital Storm Lynx: i9-10850k (5.2 GHz): 64GB RAM (3200 MHz): 2TB SSD M.2 Samsung 970 EVO: 2TB Samsung HD: GEFORCE 2080 TI: Thrust Master WartHog (modified): TM F-18C joystick: Saitek Rudder Pedals: HP Reverb PRO: Volair Sim Cockpit: Current Stable Version of DCS IRL Retired Maintainer of the AT-38B: F-4E/G: F-15A/B/C/D: and McDonnell Douglas/Boeing Technical Advisor for the F-15C/D. I drive trains now.
MAXsenna Posted October 4, 2021 Posted October 4, 2021 Is there a way to program the Cube Sim RDR to use an axis instead of a button? If not, is there a way to program it to scroll one line at a time instead of three? I don't think so.I have the same issue.I'm actually disappointed, because I thought it was an axis with a button press.Everything else was good about it.Came in a box with all the necessary accessories. Sent from my MAR-LX1A using Tapatalk
hasole Posted October 5, 2021 Posted October 5, 2021 I'm trying to make sense of the arduino code to make it one click = one button press as for the radar in the viper it is pretty useless. 1
hasole Posted October 6, 2021 Posted October 6, 2021 Ok, I've got it working as you would expect it and it gives me fine control of the FCR in the Viper. You need this open source update file from cubesim below, but do not use the .ino file that is included in it. That has the same code that is currently loaded on the RDR which presses the button like 3 times. https://drive.google.com/file/d/1-tBk-F09lJsD-64xWHtdgXNJ5-I5AO1q/view Once you have the arduino software loaded (I used the zip as it is portable), libraries updated, added the zips. Download and load this ino file. Verify it and then upload it. Then go and test it in Windows USB game and DCS https://drive.google.com/file/d/1CvcGPvaRXkawAke9Yfy-vs2CyZjGCFFr/view Works for me. 1
MAXsenna Posted October 6, 2021 Posted October 6, 2021 Ok, I've got it working as you would expect it and it gives me fine control of the FCR in the Viper. You need this open source update file from cubesim below, but do not use the .ino file that is included in it. That has the same code that is currently loaded on the RDR which presses the button like 3 times. https://drive.google.com/file/d/1-tBk-F09lJsD-64xWHtdgXNJ5-I5AO1q/view Once you have the arduino software loaded (I used the zip as it is portable), libraries updated, added the zips. Download and load this ino file. Verify it and then upload it. Then go and test it in Windows USB game and DCS https://drive.google.com/file/d/1CvcGPvaRXkawAke9Yfy-vs2CyZjGCFFr/view Works for me. Thanks I will try that! I have a Cougar for the Viper, so I got this for other modules. Hope it works! Sent from my MAR-LX1A using Tapatalk
Bulldog_1 Posted October 13, 2021 Author Posted October 13, 2021 Thank you for your research and posting. However, when I uploaded this file it now only scrolls one line per two clicks of the wheel in either direction. Very slow when compared to when you assign it to another button on your throttle. Digital Storm Lynx: i9-10850k (5.2 GHz): 64GB RAM (3200 MHz): 2TB SSD M.2 Samsung 970 EVO: 2TB Samsung HD: GEFORCE 2080 TI: Thrust Master WartHog (modified): TM F-18C joystick: Saitek Rudder Pedals: HP Reverb PRO: Volair Sim Cockpit: Current Stable Version of DCS IRL Retired Maintainer of the AT-38B: F-4E/G: F-15A/B/C/D: and McDonnell Douglas/Boeing Technical Advisor for the F-15C/D. I drive trains now.
MAXsenna Posted October 13, 2021 Posted October 13, 2021 Thank you for your research and posting. However, when I uploaded this file it now only scrolls one line per two clicks of the wheel in either direction. Very slow when compared to when you assign it to another button on your throttle. Yeah, that's what I have out of the box. Sent from my MAR-LX1A using Tapatalk
MirabelleBenou Posted May 1, 2022 Posted May 1, 2022 On 10/7/2021 at 12:07 AM, hasole said: Ok, I've got it working as you would expect it and it gives me fine control of the FCR in the Viper. You need this open source update file from cubesim below, but do not use the .ino file that is included in it. That has the same code that is currently loaded on the RDR which presses the button like 3 times. https://drive.google.com/file/d/1-tBk-F09lJsD-64xWHtdgXNJ5-I5AO1q/view Once you have the arduino software loaded (I used the zip as it is portable), libraries updated, added the zips. Download and load this ino file. Verify it and then upload it. Then go and test it in Windows USB game and DCS https://drive.google.com/file/d/1CvcGPvaRXkawAke9Yfy-vs2CyZjGCFFr/view Works for me. Hello !! Thanks ! Was looking for this since some time now. Would you be able to explain a bit how it works ? I saw that you removed the for loop on the original code and I quite don't understand how the original code works... It's like each clic do it 3 times, but in the code, 2 different status with a loop 30 times ?? What the .... ? Would it be possible to have each clic of the wheel do something, instead of 1 per 2 clicks ? Thanks ! 1 06th Multirole Helicopter Regiment Bataillon d'appui aérien - Escadrille HOG
Recommended Posts