dresoccer4 Posted February 16, 2022 Posted February 16, 2022 (edited) I searched the keybindings for "Gun Mode Button" but that command does not exist. What is the correct keybinding called for this button? Edited February 16, 2022 by dresoccer4 Acer Predator Triton 700 || i7-7700HQ || 512GB SSD || 32GB RAM || GTX1080 Max-Q || FFB II and Thrustmaster TWCS Throttle || All DCS Modules
Kirk66 Posted February 16, 2022 Posted February 16, 2022 (edited) From the DCS M-2000 manual, in the SNA Modes Selection section: CNM SWITCH (on throttle) The CNM switch (sélécteur armement CNM) function is the same irrelevant of the SNA mode. C (Canons air-air – Air-to-air guns): Rightmost position, selects the air-to-air gun and sets the SNA in air-to-air mode. N (Neutre – Neutral): Center position, returns to the previously selected SNA mode and weapon. • M (MAGIC): Leftmost position, selects the MAGICs and sets the SNA in air-to-air mode. There is a 0,5 second delay before the CNM switch neutral position is registered to allow the SNA to be switched between air-to-air gun and MAGIC modes without returning to the previous selection CNM switch is on throttle, if you are using a Warthog throttle, for example, you can use the 3 position thumb switch that is below the speed brakes (Boat Switch) to Forward: Magic (else SNA), Center: SNA selection (usually the 530), and AFT: Guns (else SNA). Vulture USAFA '74 Edited February 16, 2022 by Kirk66 1
dresoccer4 Posted February 16, 2022 Author Posted February 16, 2022 2 minutes ago, Kirk66 said: From the DCS M-2000 manual, in the HOTAS section: CNM SWITCH The CNM switch (sélécteur armement CNM) function is the same irrelevant of the SNA mode. • C (Canons air-air – Air-to-air guns): Rightmost position, selects the air-to-air gun and sets the SNA in air-to-air mode. • N (Neutre – Neutral): Center position, returns to the previously selected SNA mode and weapon. • M (MAGIC): Leftmost position, selects the MAGICs and sets the SNA in air-to-air mode. There is a 0,5 second delay before the CNM switch neutral position is registered to allow the SNA to be switched between air-to-air gun and MAGIC modes without returning to the previous selection CNM switch is on throttle, if you are using a Warthog throttle, for example, you can one of the 3 position thumb switches to Forward: Magic (else SNA), Center: SNA selection (usually the 530), and AFT: Guns (else SNA). Vulture USAFA '74 hello thanks for your response. however you're talking about something else entirely. I'm talking about the "Gun Mode Button" that is directly below the "Selective Jettison Switch" Acer Predator Triton 700 || i7-7700HQ || 512GB SSD || 32GB RAM || GTX1080 Max-Q || FFB II and Thrustmaster TWCS Throttle || All DCS Modules
Kirk66 Posted February 16, 2022 Posted February 16, 2022 Ah OK, This one? AIR-TO-GROUND GUNS SELECTION BUTTON (CAS - Touche de séléction canons air-sol): Selects the air-to-ground guns. I think it's the "AG Gun SELECT" command, in the PCA Weapons Management section. Vulture 1
Recommended Posts