twistking Posted August 5, 2022 Posted August 5, 2022 Have been returning to the A-10c II after a long time and have trouble with the Countermeasures. I run manual mode, but my selected program gets overruled constantly and also my custom program gets reset. My workflow: I put the system to manual mode, select program Z (since A - M are reserved for semi and auto modes), modify program Z for what i need. If i now use the quick-access modes (cms switch in any direction), the system jumps back to program A for some reason and the modification i did to program Z are also reset. What am i doing wrong here? I suspect that program Z may be reserved for the quick-access programs, but this does not explain why it jumps to program A. How to use manual CMS on the current version of the sim? My improved* wishlist after a decade with DCS *now with 17% more wishes compared to the original
Solution twistking Posted August 6, 2022 Author Solution Posted August 6, 2022 ok. tested again and the problem seems to be the Z program. it seems to be used for the quick access programs as i suspected. using program Y for custom programming works flawlessly. 1 My improved* wishlist after a decade with DCS *now with 17% more wishes compared to the original
Recommended Posts