Pede Posted November 7, 2022 Posted November 7, 2022 For some reason since the update I can't start the AV8-B's engine. As in it won't even go into idle; the engine spools to exactly 5.7% then sputters and stays there. Here's my current cold start procedure. Remove wheel chocks Battery on External power Right MFD on (Begin ins alignment; enter long lat, switch to ins gnd) Canopy closed and locked Generator on Fuel shutoff down DCS up Oxygen on L&R fuel pump to normal Fuel portion forward Engine start -> 9.2% rpm (Rest is omitted because RPM never reaches 9.2%)
sgtoinkz Posted November 8, 2022 Posted November 8, 2022 (edited) I wonder if you're in ground idle without knowing?...A mistake I was making was moving my (HOTAS)throttle and it causing the Harrier's throttle to move into ground idle, preventing a start without me knowing...I prefer to hide the controls. I had to remember to not move my HOTAS before the igniters started firing off and RPM's start increasing on a direct engine start. I made a habit of also just hitting my key bind for throttle cutoff before I start up to reset the throttle in case of accidental movement. Hope this helps. Edited November 8, 2022 by sgtoinkz
Pede Posted November 8, 2022 Author Posted November 8, 2022 14 hours ago, sgtoinkz said: I wonder if you're in ground idle without knowing?...A mistake I was making was moving my (HOTAS)throttle and it causing the Harrier's throttle to move into ground idle, preventing a start without me knowing...I prefer to hide the controls. I had to remember to not move my HOTAS before the igniters started firing off and RPM's start increasing on a direct engine start. I made a habit of also just hitting my key bind for throttle cutoff before I start up to reset the throttle in case of accidental movement. Hope this helps. So I double checked, because sometimes my throttle ghosts so I figured this might be the problem but no dice. Weirdly I can get it to start now, when it hits 5.7% rpm and begins to stutter, if I advance the throttle at all it goes all the way up to 28.5%. Wondering if the patch changed the pre-idle throttle max to 5.7% from 9.2% now.
zildac Posted November 8, 2022 Posted November 8, 2022 So I double checked, because sometimes my throttle ghosts so I figured this might be the problem but no dice. Weirdly I can get it to start now, when it hits 5.7% rpm and begins to stutter, if I advance the throttle at all it goes all the way up to 28.5%. Wondering if the patch changed the pre-idle throttle max to 5.7% from 9.2% now. I see no difference to the Harrier throttle response and startup procedure in 2.8 OB. Very odd 14900KS | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 6600 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero
Thanatos31 Posted November 10, 2022 Posted November 10, 2022 Pre throttle max was reduced to 5.7% as per SME feedback. 1 Come fly with us : https://discord.gg/tawdcs TAW CJTF 13 - EU TZ MilSim Squadron Ryzen 5 5600X | 32GB DDR4 3733| ASUS Radeon RX 6700 XT | ASrock B550 Phantom Gaming 4 | HP Reverb G2 | Thrustmaster Warthog Throttle , F16 & F18 grips , TFRP Rudders | Win 10
Recommended Posts