Open XR broken after the last upgrade

[Dangerzone]

On 12/4/2022 at 10:10 PM, nic464 said:

dcs.log-20221204-110654.zip 257.46 kB · 2 downloads

I made sure everything was updated, but still no luck. Game is crashing still

I attach the log 

 

Thank

Nic

 

I apologise again. I'm getting the same error (it has returned) with 2.7 SR, so I'm afraid I may have given you a bum steer. I'm sorry.

[X_legio]

Yes this is strange, some mission are ok some not. even the same missione one time is ok another time is broken. To me all was perfect until the 2.8, then I started to have this problem.Lucky me I have a good HW so I can use stream without problem but with openxr was slightly better. I have no problem with FS2020 

[Thomas_LOLW]

...I manually downloaded the 64 bit dll file (https://znix.xyz/OpenComposite/download.php?arch=x64&branch=openxr)  and pasted it into the DCS bin folder, overwriting the old file. Since then - no more issues with OpenXR on DCS servers 

[nic464]

On 12/7/2022 at 6:24 AM, BIGNEWY said:

No issues here, updated open composite and DCS 2.8 

Try uninstalling open composite and reinstalling 

run a repair of DCS also 

 

Would you mind trying this solo mission : Through The Inferno Syria starting at Cyprus.  I know its a 3rd party mission but I can load it with SteamVR or 2d but crashing with OpenXR.  I can reproduce the bug at 100% on this particular mission. I tried unistall/install, god I even format my computer trying to find a solution. Seems to happen with very high populated mission. I can run instant action syria mission with OpenXr with no crash.  Thanks

[BIGNEWY]

1 hour ago, nic464 said:

Would you mind trying this solo mission : Through The Inferno Syria starting at Cyprus.  I know its a 3rd party mission but I can load it with SteamVR or 2d but crashing with OpenXR.  I can reproduce the bug at 100% on this particular mission. I tried unistall/install, god I even format my computer trying to find a solution. Seems to happen with very high populated mission. I can run instant action syria mission with OpenXr with no crash.  Thanks

Please PM me with your dcs log after an attempt it should have some clues

[X_legio]

14 ore fa, Thomas_LOLW ha scritto:

...I manually downloaded the 64 bit dll file (https://znix.xyz/OpenComposite/download.php?arch=x64&branch=openxr)  and pasted it into the DCS bin folder, overwriting the old file. Since then - no more issues with OpenXR on DCS servers 

Did it some days ago with no luck

[PeterMarley]

I asked about this in the OpenComposite Discord (there's a link on the Gitlab page: https://gitlab.com/znixian/OpenOVR), and I was advised to turn Motion Reprojection off as a workaround.

I had been getting the `xrWaitSwapchainImage timeout` error after opening the F10 Map in DCS (but also saw it sometimes on mission load), and only while running OpenComposite (not SteamVR). I got the error on both the Stable and Open Beta versions of DCS (2.7 & 2.8). I'm using the per game installation of OpenComposite (`v1.0.933` at the time of writing), not the system wide installation.

After turning Motion Reprojection OFF, I haven't seen the error.

I do think that things were slightly smoother with Motion Reprojection on, but it doesn't look like that's an option for now. I was also told in the Discord that there would be a fix for the issue in an upcoming version of OpenComposite, but there's no ETA as of now.

If anyone in this thread has OpenComposite working with DCS with Motion Reprojection ON, I'd still appreciate any advice! Hope this helps.

My Hardware:
HP Reverb G2
Intel Core i7-12700K
RTX 3080

Edit: I've attached my OpenComposite crash log

opencomposite - xrWaitSwapchainImage timeout.log

Edited December 9, 2022 by PeterMarley
Forgot to attach log file

[mbucchia]

8 minutes ago, PeterMarley said:

I asked about this in the OpenComposite Discord (there's a link on the Gitlab page: https://gitlab.com/znixian/OpenOVR), and I was advised to turn Motion Reprojection off as a workaround.

Thanks for posting. This is purely an OpenComposite bug, which I have reported to the OpenComposite developer. I am not sure when/if they will address it. Next version of OpenXR Toolkit will implement a fix in case OpenComposite is not fixed by then.

[X_legio]

13 ore fa, PeterMarley ha scritto:

After turning Motion Reprojection OFF, I haven't seen the error.

+1 here..... Solved the issue 

[nic464]

Found a fix on the opencomposite discord

Need to replace Openxr toolkit with that version (read the discord).

https://discordapp.com/channels/499733750209314816/972490494678560789/1043304066178089020

I can now load any mission with Motion Repro Enabled

 

[X_legio]

32 minuti fa, nic464 ha scritto:

Found a fix on the opencomposite discord

Need to replace Openxr toolkit with that version (read the discord).

https://discordapp.com/channels/499733750209314816/972490494678560789/1043304066178089020

I can now load any mission with Motion Repro Enabled

 

Can't read the discord, could you post the correct version here ? Thank in advance

[nic464]

I sent you a PM, I'll let mbucchia decide if he want to make it available here.

[X_legio]

3 minuti fa, nic464 ha scritto:

I sent you a PM, I'll let mbucchia decide if he want to make it available here.

RGR

[mbucchia]

There will be a public version available at some point, probably a week or two from now. I insist again this is an OpenComposite bug. I wish they could release a fix for it themselves since they don't have a release cycles (they just release whenever). OpenXR Toolkit however is on a release cycle that follows certain testing period, hence the delay.

[mbucchia]

1 hour ago, X_legio said:

Can't read the discord, could you post the correct version here ? Thank in advance

If you join the OpenXR Toolkit discord (see our website), then the link will become accessible.