rattler Posted February 1, 2009 Posted February 1, 2009 When using an AI aircraft in game , when making mission you can adjust for full fuel load. When mission is run you are almost empty. Is there anyone who know how to fix this? Would be greatly appreciated. Cheers
Vekkinho Posted February 2, 2009 Posted February 2, 2009 Not sure I understand your Q, but if it's AI wingmen bug ('cause they burn fuel much quicker than U do). Answer to this question is, they usually fly tight echelon right and constantly keep adjusting throttle RPM in order to stay in formation so when you level turn they accelerate to keep the same BRA as during straight flight! You can overcome this by turning into their flight path, if they're to your right make right turns so they'll slow down instead of kicking AB! [sIGPIC][/sIGPIC]
rattler Posted February 2, 2009 Author Posted February 2, 2009 Not sure I understand your Q, but if it's AI wingmen bug ('cause they burn fuel much quicker than U do). Answer to this question is, they usually fly tight echelon right and constantly keep adjusting throttle RPM in order to stay in formation so when you level turn they accelerate to keep the same BRA as during straight flight! You can overcome this by turning into their flight path, if they're to your right make right turns so they'll slow down instead of kicking AB! Good advise but not problem(well) as you pointed out. My problem is if someone makes a mod and I will use example, they make a m2000.lom file and skins for aircraft etc. Now you make a mission and give it a full load of fuel. When you fly mission your fuel gauge show you are down to the 3rd level. This is not a full load of fuel and it will do this with any mod that uses well lets say an AI aircraft. You say yes to human pilot. Mine shows 73% fuel capacity and I might have 50% but I never calculated it out. No issue with aircraft designed to fly in LOFC. You can't even manual refuel past a set point which means stay close to airbase. Even with external tanks it will not change. Give it a try and you will see what I mean. If you don't have same problem then I have an issue. Mine is a clean install again of LOFC , reg cleaned out , everything and reloaded. Thanks for reply and I hope you can get back to me on this. Cheers.:thumbup:
Recommended Posts