=36=Witcher Posted April 20, 2023 Posted April 20, 2023 (edited) Hello everyone! I recently bought the F1 and going through my familiarization routines I seem to have some issues with the SRS integration. Speicifically, when I startup the plane, radios will have incorrect values (0.000 and 0.010) even when radios are powered up. After randomly playing with both modes and channels knobs, and also with manual frequency selectors, the SRS overlay evetually starts to show correct values. Even so, two issues still persist: - PAL+G mode, that should listen on both the selected frequency and Guard, actually shows 0.000; - The Channels selector have an offset of 5, i.e. selecting Channel 1 in one of the radios shows C6 in the SRS Overlay; Channel 2 shows C7 in the overaly, and so on. Channel 16 in the knob shows C1 in the overlay. This happens with both F1CE and F1EE. So I was wondering, all these behaviours are normal and I'm doing something wrong, is there something to fix in the SRS integration instead? Edited April 20, 2023 by =36=Witcher
fausete Posted April 20, 2023 Posted April 20, 2023 Hi, we'll take a look at it and see if the problem is on our end. Thanks for the report!
=36=Witcher Posted April 21, 2023 Author Posted April 21, 2023 I think I have found a consistent reproduction. In order to "Unlock" radios, after powering them on, I have to: - Set PAL+G on Green Radio - Move test switch to R and back to EA+2 - Change frequency (if in M) or Channel (if in P). After this, Red Radio also starts to work when changing channel. 1
Recommended Posts