Jump to content

Recommended Posts

Posted (edited)

I have the transparent UC knob as one of my files, but it is made to fit my UC lever. However if you want I can modify the original to fit your lever if you give me details

Les

Edited by lesthegrngo
Posted (edited)
15 hours ago, lesthegrngo said:

I have the transparent UC knob as one of my files, but it is made to fit my UC lever. However if you want I can modify the original to fit your lever if you give me details

Les

 

Thank you for your offer. If you could provide a variant with a 5 mm round hole, as well as a variant with no hole, that would be great. Just the variant with a 5mm hole if you're short on time.

As for the Warthog Project, I haven't found a single STL file in the download library (Google Drive).

Edited by Bucic
  • 3 months later...
Posted (edited)
Am 12.11.2023 um 09:53 schrieb Bucic:

...

As for the Warthog Project, I haven't found a single STL file in the download library (Google Drive).

 

The landing gear knob of the warthog projects files isn't a stl file/ 3D printed. It  is made out of several lasercut acrylic discs, sanded down to the desired formate.
The discs are actually enclosed in the dxf file inside the landing gear folder.

If you're still searching for the stl files, they are in the different panel folders (when you have downloaded the A-10C files folder https://drive.google.com/drive/folders/1axItbR_lMZ-5oa0x_59NkXgu5vaw4ljM?usp=drive_link).

There are 121 .stl files up to now. E.g. the HSI heading knob stl is inside the HSI panel folder (C:\Users\???\Downloads\_A10C panels\A-10C Panels\1) Main Instrument Panel\Horizontal Situation Indicator (HSI).

Edited by sharkfin61
updated the nmbr of stl files
  • Thanks 1

Loads do it on the fly!    Loads.jpg     Royal Bavarian Airforce all the way

RIG: RYZEN 7  5800X3D~ ZOTAC 4080 Super ~ AORUS X570S Elite AX ~64 GB Corsair Venegance DDR-4 3600 ~ BeQuiet AIO Silent loop 2 360  watercooled ~ Samsung 890 Pro M.2 (2TB) + 870 EVO (1TB) SSD ~ WIN 10 64-bit ~ AOC 31.5" Gaming 144Hz Display ~ DelanClip@TrackIR 5 ~ TM Warthog no.2 ~Saitek rudder pedals~ 2 TM MFDs on 2nd 27"display ~ Buddyfox A-10 UFC ~ CDU/AAP panel via DCSBios ~ ARC-210 (soldering WIP) ~
QUEST 3 

 

  • 8 months later...
Posted

My alterations of @lesthegrngo s knob designs:

the Intercom dial as an .stl file fór a split shaft  and a D-shaft rotary switch

ICP Switch knob D-shaft v1.stl ICP Dial knob 5.6mm split shaft.stl

Loads do it on the fly!    Loads.jpg     Royal Bavarian Airforce all the way

RIG: RYZEN 7  5800X3D~ ZOTAC 4080 Super ~ AORUS X570S Elite AX ~64 GB Corsair Venegance DDR-4 3600 ~ BeQuiet AIO Silent loop 2 360  watercooled ~ Samsung 890 Pro M.2 (2TB) + 870 EVO (1TB) SSD ~ WIN 10 64-bit ~ AOC 31.5" Gaming 144Hz Display ~ DelanClip@TrackIR 5 ~ TM Warthog no.2 ~Saitek rudder pedals~ 2 TM MFDs on 2nd 27"display ~ Buddyfox A-10 UFC ~ CDU/AAP panel via DCSBios ~ ARC-210 (soldering WIP) ~
QUEST 3 

 

Posted

Not 3D print related but a simple way I found to make a transparent gear handle was to use a hole saw drill bit without the middle drill guide and cut several clear acrylic circles.

Glue them together, sand to diffuse then stained it with some dye in lacquer, drill to the middle to insert aluminium tube for motion and LED.

Assume you can now get transparent 3D resin so it’s not needed to be this manual anymore!

  • Like 1
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...