H60MTI Posted January 28, 2024 Posted January 28, 2024 I've noticed that if I have some smart weapons loaded on centerline as well as the 2 wing pylons, have the program setup for all 3 of the weapons, I can't step through all three of them under the smart weapons page. I can only step through the 2 under the wings. Once those are dropped, not programmed, but dropped, then I can step to my centerline weapon. Former SSG US Army UH-60A/L/M Crewchief "2 To Fly!"
zlm63682 Posted January 29, 2024 Posted January 29, 2024 can't step through because you have programmed the releasing program and have turned on the MASTER ARM, you can switch to program 2 or 3 or 4 whichever is not used to cycle through all the smrt weapons it's probably a bug but not fixed yet.
H60MTI Posted January 30, 2024 Author Posted January 30, 2024 I don't program a release point, I run them in direct so I can drop at any point. By programmed I mean, under ARMT, then AG, I set up program 1 or 2 for the pylons I want, in this case, 2, 8, and whatever the centerline is. Always direct, STEP and N/T. Former SSG US Army UH-60A/L/M Crewchief "2 To Fly!"
zlm63682 Posted January 30, 2024 Posted January 30, 2024 (edited) 15 hours ago, H60MTI said: I don't program a release point, I run them in direct so I can drop at any point. By programmed I mean, under ARMT, then AG, I set up program 1 or 2 for the pylons I want, in this case, 2, 8, and whatever the centerline is. Always direct, STEP and N/T. yeah as long as you have programmed, the selection issue you mentioned will occur, that's what i was going to say. in your case you have programmed 1 and 2, so switch to program 3 or 4 and you will be able to cycle through all stations Edited January 30, 2024 by zlm63682
FusRoPotato Posted February 7, 2024 Posted February 7, 2024 I've also run into problems where 6 54's on the belly will cycle through 5 but not the 6th until all 5 of the others have been deployed. I've also seen the ARM page bug out after firing AIM-120's from the wing but then and try to select an AIM-120 slot that existed on a previous loadout but doesn't exist for the current loadout because there's a sidewinder in its place instead. When this happens, it puts boxes up in the ARM page like it's ready to launch but there is no missile listed. It makes the rest of the missiles unusable. Possibly this is all related, or maybe not?
Recommended Posts