M 15 Fratricide

[Kurnass1977]

Hello @Nix Mills, for the second time the debrifing message stated that committed fratricide. The only target really danger close is the ambush, with the new bomb blast radious is very simple kill blue troop at a 100m distance.

Also,there're again discrepancy between the HUD indicated altitude and the real one.

Any idea?

 

 

Edited Friday at 05:36 PM by Kurnass1977

[Kurnass1977]

Ok tried replace a fuel tanks with a Lmav for his smaller blast radius but nothing changed and the ambushe friendlies don't survive ,also look how much difference there're between the HUD indicated altitude and the real, even with modified QFE

[razo+r]

5 minutes ago, Kurnass1977 said:

,also look how much difference there're between the HUD indicated altitude and the real, even with modified QFE

 

 

 

Altitude in the external view should be true altitude while the one in the cockpit is pressure one. Difference between these two is temperature effect. What's the temperature in the mission?

Also, don't set QFE, almost nobody flies QFE anymore. You either set QNH or QNE/standard above the transition altitude.

[Kurnass1977]

Probably I misunderstood the QFE and QNH , the gauge in the circle is used to set the QNH right ( in this mission by default id 29,90 if remember correctely)?

About the temp really don't know the value, need to check if is present  ( surely not in the mission briefing PDF)

Also sorry for my ignorance, which is the transition altitude?

Thanks

[razo+r]

10 hours ago, Kurnass1977 said:

Probably I misunderstood the QFE and QNH , the gauge in the circle is used to set the QNH right ( in this mission by default id 29,90 if remember correctely)?

Yes, you set it there.

10 hours ago, Kurnass1977 said:

About the temp really don't know the value, need to check if is present  ( surely not in the mission briefing PDF)

Should be in the ingame briefing.

10 hours ago, Kurnass1977 said:

Also sorry for my ignorance, which is the transition altitude?

Thanks

Depends on the airport, but around 5000ft is a decent altitude to switch the altimeter.

[Kurnass1977]

11 ore fa, razo+r ha scritto:

Yes, you set it there.

Should be in the ingame briefing.

Depends on the airport, but around 5000ft is a decent altitude to switch the altimeter.

Ok.

Normally I set the altimeter to radar when on the ground ( and carrier) and to Baro after the 5000ft, adjusting the QNH to match the true altitude. But in this mission even with the altitude set to the max ( in the pics you can see the value of 31.00 is impossible to read on thr HUD the correct,real altitude.

BTW, temperature is +28°

[razo+r]

2 hours ago, Kurnass1977 said:

Ok.

Normally I set the altimeter to radar when on the ground ( and carrier) and to Baro after the 5000ft, adjusting the QNH to match the true altitude.

You set the QNH given by the briefing on ground so your altimeter reads the elevation above mean sea level. Above the transition altitude you set QNE/Standard to get flight level.

2 hours ago, Kurnass1977 said:

But in this mission even with the altitude set to the max ( in the pics you can see the value of 31.00 is impossible to read on thr HUD the correct,real altitude.

There is no real altitude, only altitude in relation to your selected reference altitude. That's either flight level, level above ground (height), altitude above MSL, density altitude or other. Temperature affects your altimeter so it reads something different than height, that's normal. You don't compensate for that normally.

2 hours ago, Kurnass1977 said:

BTW, temperature is +28°

That's one of the main reason for the devaition you see.

Edited 2 hours ago by razo+r