WarriorX Posted January 19, 2011 Share Posted January 19, 2011 I know Mower, the lack of indexer line should be addressed. I just know it default starts on VHF, and if I need a reference, I use the mechanical stops to establish either end, then count back to what I want. [sIGPIC][/sIGPIC] "Is that you John Wayne?.......Is this me?" Full Metal Jacket //My Mission Data Card//My Cold Start Checklist //Clearing a Hung Store Tutorial //CDU Offset//Asterisk Error Correction Procedure//JTAC UTM Coordinate Entry Tutorial//JTAC 9 Line Lat Long Coordinate Entry Tutorial Link to comment Share on other sites More sharing options...
WarriorX Posted January 19, 2011 Share Posted January 19, 2011 Thank you Warrior X; now, it works good. Glad you got it working Elasticbleu. If you dont mind me asking, would you please share with me what it was that was hanging you up? I ask because it helps me identify confusion points in the radio use, which I can then be sure to reinforce in later tutorials. You would be helping all those in the future that get the Sim. [sIGPIC][/sIGPIC] "Is that you John Wayne?.......Is this me?" Full Metal Jacket //My Mission Data Card//My Cold Start Checklist //Clearing a Hung Store Tutorial //CDU Offset//Asterisk Error Correction Procedure//JTAC UTM Coordinate Entry Tutorial//JTAC 9 Line Lat Long Coordinate Entry Tutorial Link to comment Share on other sites More sharing options...
ColGray Posted January 20, 2011 Share Posted January 20, 2011 (edited) Well i hate to add on but i seem to have to same problem my wingmen wont respond, i tune into ufh radio frequency and i hear them call out rolloing wheels up etc. but when i give an order they dont respond in any way, i have easy comms enabled for the time being also i read in the manuel black lettering means you cant communicate wtih that group... wingman and flight are always black Edited January 20, 2011 by ColGray The State Military (CVW-17) [sIGPIC][/sIGPIC] VICTORY 104 F-14B BuNo 161442 VF-103 LTJG J. “Shades” Gray http://www.statelyfe.com Win-10 x64 EVGA 2070 FTW Thermaltake 850w Intel I7-8700K at 3.7 Ghz 32GB Corsair DDR4 at 3000mhz Link to comment Share on other sites More sharing options...
WarriorX Posted January 20, 2011 Share Posted January 20, 2011 ColGray, unfortunately I have never used the easy comms. But I would guess that if you hear him call wheels up, you are in communication with him. Can one of you guys/gals who are more used to the easy comms give him a hand? [sIGPIC][/sIGPIC] "Is that you John Wayne?.......Is this me?" Full Metal Jacket //My Mission Data Card//My Cold Start Checklist //Clearing a Hung Store Tutorial //CDU Offset//Asterisk Error Correction Procedure//JTAC UTM Coordinate Entry Tutorial//JTAC 9 Line Lat Long Coordinate Entry Tutorial Link to comment Share on other sites More sharing options...
elasticbleu Posted January 20, 2011 Share Posted January 20, 2011 Warrior X, Thank you again for your help. I believe that my problem was the result of a dial's bad position . As Mopper say precedently, it is not easy to find it without index. Your tutorial is perfect. Link to comment Share on other sites More sharing options...
ColGray Posted January 20, 2011 Share Posted January 20, 2011 Oh i got it now, i was not using all the mic switches The State Military (CVW-17) [sIGPIC][/sIGPIC] VICTORY 104 F-14B BuNo 161442 VF-103 LTJG J. “Shades” Gray http://www.statelyfe.com Win-10 x64 EVGA 2070 FTW Thermaltake 850w Intel I7-8700K at 3.7 Ghz 32GB Corsair DDR4 at 3000mhz Link to comment Share on other sites More sharing options...
nemises Posted May 14, 2011 Share Posted May 14, 2011 ...are the rest of your flight dead at the time?...they will stop communicating after they die.. ...."use the force luke!" Link to comment Share on other sites More sharing options...
Recommended Posts