abris map help

[Kite]

hello. Is there a way to insert coordinates for a steerpoint on abris map ?

I worked out to insert waypoint moving the box with the knob but I am searching a way to insert coordinates that a playmate can give me.. Let say.. Go to 43.12.121 121.6.22. In pvi no problem but want to insert also new way poi t in abris . Is there a way?

thanks

[goon3r]

In short no, there is no way to key points into the ABRIS directly. You would have to use the knobs. I had the same question and the long answer is in this thread:

 

http://forums.eagle.ru/showthread.php?t=53149

[Xxx]

If your wingman wants to send a coordinate to your ABRIS ( or if you want to input coordinates to the ABRIS) it could be done by :

 

Having the coordinates set in the wingmans system he would:

 

1. Select target type on Data Link Control Panel

 

2. Select the helicopter flight number on the Data Link Control Panel that is to receive the data( ie you)

 

3.If there is more than one target of the same type in system memory, he will need to go back and press the target type button on the Data Link Control Panel as many times as required to cyle through all targets of the same type

 

4. Press the "ПРД/ПАМ" (Send/Memory) button on the Data Link Panel to send the data to the selected flight members (you) The symbology will be on your ABRIS.

 

To use the PVI800 to send Target Point Coordinates, or in put them into your ABRIS:

Having already input the coordinates by either typed entry via PVI800 keypad or by Shkval designation:

 

1. Press the "ОТ" (Target point) push-light button on Navigation Control panel

 

2. Select the TP ID using the Navigation Control panel keypad. The number will then be displayed on the Navigation Control panel display and the ABRIS will have a blinking marker point as well.

 

3. Press the desired target type or ingress point push-light button on the Data Link panel (button will light)

 

4. Select recipient(s) number or all (button will light).

 

5. Press the "ПРД/ПАМ" (Send/Memory) button (button will light briefly).

If you omit step 4 then the coordinates point will be input to your ABRIS.

Hope this helps.:thumbup:

 

 

 

 

 

 

 

[Kite]

wow. Use datalink to insert coordinates I. Abris . Cute! It works

thanks a lot . Working .

[dooom]

1. Press the "ОТ" (Target point) push-light button on Navigation Control panel

 

2. Select the TP ID using the Navigation Control panel keypad. The number will then be displayed on the Navigation Control panel display and the ABRIS will have a blinking marker point as well.

 

3. Press the desired target type or ingress point push-light button on the Data Link panel (button will light)

 

4. Select recipient(s) number or all (button will light).

 

5. Press the "ПРД/ПАМ" (Send/Memory) button (button will light briefly).

 

If you omit step 4 then the coordinates point will be input to your ABRIS""

 

... Wow - you learn something new everyday - thanks for this i didnt know this one.