juankeiko Posted July 6, 2011 Posted July 6, 2011 I found these two interesting web pages. They are selling instruments for aircraft cockpits and several components. These instruments are extracted from planes are to be scrapped. I looked more websites of USA who also sell these instruments to cockpits, but not sent outside the U.S.. I imagine it will be for security or patents. It's something I'm not sure. Anyway, if anyone is interested you can contact via email from the web or by phone. Here are the links: http://www.aviationwarehouse.net/1050905.html http://www.preferredairparts.com/instruments.htm Good Flights :pilotfly::thumbup: ---=ONLY ANGELS FLY HIGHER=----[sIGPIC][/sIGPIC] Cuando llegues al final de tu cuerda, haz un nudo y aguanta. Franklin Delano Roosevelt When you reach the end of your rope, tie a knot and hang on. Franklin Delano Roosevelt :pilotfly::thumbup: Buenos Vuelos-Good flights
KLaFaille Posted July 6, 2011 Posted July 6, 2011 They won't sell to outside the US because it would be a felony violation of ITAR laws, International Traffic in Arms Regulations. Even though they are just instruments they still fall under the regulations due to their military usage. A lot of backroom or loophole sales to Europe happen on these instruments or other components, by people who either don't know, don't care, or just take chances anyway. It is not unheard of for there to be arrests regards to this either. Just an FYI, Red
Deadman Posted July 7, 2011 Posted July 7, 2011 What till you see the prices :( plus most items are civilian https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
juankeiko Posted July 7, 2011 Author Posted July 7, 2011 (edited) They also sell military instruments What till you see the prices :( plus most items are civilian I have been in contact with them and if they have military instruments. If you want Deadman you can do the same and so you check it.:pilotfly::thumbup: Ah, i forgot it, you have to send them the reference number of the instrument you want. Edited July 7, 2011 by juankeiko ---=ONLY ANGELS FLY HIGHER=----[sIGPIC][/sIGPIC] Cuando llegues al final de tu cuerda, haz un nudo y aguanta. Franklin Delano Roosevelt When you reach the end of your rope, tie a knot and hang on. Franklin Delano Roosevelt :pilotfly::thumbup: Buenos Vuelos-Good flights
juankeiko Posted July 7, 2011 Author Posted July 7, 2011 Thanks for the info They won't sell to outside the US because it would be a felony violation of ITAR laws, International Traffic in Arms Regulations. Even though they are just instruments they still fall under the regulations due to their military usage. A lot of backroom or loophole sales to Europe happen on these instruments or other components, by people who either don't know, don't care, or just take chances anyway. It is not unheard of for there to be arrests regards to this either. Just an FYI, Red I imagined I could be anything against the law and legality. Thanks for the information KlaFaille ---=ONLY ANGELS FLY HIGHER=----[sIGPIC][/sIGPIC] Cuando llegues al final de tu cuerda, haz un nudo y aguanta. Franklin Delano Roosevelt When you reach the end of your rope, tie a knot and hang on. Franklin Delano Roosevelt :pilotfly::thumbup: Buenos Vuelos-Good flights
Deadman Posted July 12, 2011 Posted July 12, 2011 (edited) I have contacted them no reply as of yet. I provided the correct indicator name part # and NSN probably another dead end:huh: I have been in contact with them and if they have military instruments. If you want Deadman you can do the same and so you check it.:pilotfly::thumbup: Ah, i forgot it, you have to send them the reference number of the instrument you want. Edited July 12, 2011 by Deadman https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
juankeiko Posted July 12, 2011 Author Posted July 12, 2011 I have contacted them no reply as of yet. I provided the correct indicator name part # and NAN probably another dead end:huh: This is the answer of them: Chris Brown Chris@preferredairparts.com Good morning! I would need part numbers. Thanks and God Bless, Chris Brown Sales Preferred Airparts, LLC Kidron, OH 44636 Phone: 800-433-0814 Ext.217 Local: 330-698-0280 Fax: 330-698-3164 Email: sales@preferredairparts.com www.preferredairparts.com You have there the phone and the email. I hope help you in something Deadman. Good Flihgts Folk ---=ONLY ANGELS FLY HIGHER=----[sIGPIC][/sIGPIC] Cuando llegues al final de tu cuerda, haz un nudo y aguanta. Franklin Delano Roosevelt When you reach the end of your rope, tie a knot and hang on. Franklin Delano Roosevelt :pilotfly::thumbup: Buenos Vuelos-Good flights
Deadman Posted July 12, 2011 Posted July 12, 2011 (edited) I check with http://www.aviationwarehouse.net/1050905.html Rebuild and new aircraft worthy part will be way to expensive I have done a quick check on the sit you provided www.preferredairparts.com With the correct Part numbers for the engine indicators they don't have any in stock Edited July 12, 2011 by Deadman https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans.
juankeiko Posted July 12, 2011 Author Posted July 12, 2011 I check with http://www.aviationwarehouse.net/1050905.html Rebuild and new aircraft worthy part will be way to expensive I have done a quick check on the sit you provided www.preferredairparts.com With the correct Part numbers for the engine indicators they don't have any in stock well man, that's all. We must looking in another places. ---=ONLY ANGELS FLY HIGHER=----[sIGPIC][/sIGPIC] Cuando llegues al final de tu cuerda, haz un nudo y aguanta. Franklin Delano Roosevelt When you reach the end of your rope, tie a knot and hang on. Franklin Delano Roosevelt :pilotfly::thumbup: Buenos Vuelos-Good flights
Recommended Posts