Madman777 Posted November 5, 2011 Posted November 5, 2011 Hello - I'm having a serious control issue with BS2. I never had this issue with BS1. I think it has to do with the trimming. I've been messing with it for a few hours. I've done two fresh installs. My X-52 is setup exactly same as BS1, same profile, same X & Y settings...same everything. Video of issue - http://www.youtube.com/watch?v=WnchQ2GiTzE I know how to trim normally. See anyone of my videos in my channel (in my sig) and you can see I`ve never really had this issue before. The controls are extremely twitchy. Even when I`m properly trimmed, I roll right and left very easily. When I hold down the trimmer button is when it seems to get very twitchy. Any suggestions would help. Thanks! i7-12700k, 32GB Ram, RTX 3060 12GB, TrackIR 5, Lots of SSD Space, etc etc DCS World - All the cool modules
RPY Variable Posted November 5, 2011 Posted November 5, 2011 I have the same Stick and it was making the same thing. It was the cable that connected and disconnected, I end up making this.. http://www.youtube.com/watch?v=kJIAY2ux0jA Now it works perfect! Interl i7 6700k - 32Gb RAM DDR4 - RX 590 8GB - Sentey 32"2560x1440 - Saitek X-55 - TrackIr 3
EtherealN Posted November 5, 2011 Posted November 5, 2011 Madman, unfortunately, such a video is not very helpful. Tracks are helpful, since then we can see all the in-data. In that video, all is see is a HUD... ;) [sIGPIC][/sIGPIC] Daniel "EtherealN" Agorander | Даниэль "эфирныйн" Агорандер Intel i7 2600K @ 4.4GHz, ASUS Sabertooth P67, 8GB Corsair Vengeance @ 1600MHz, ASUS GTX 560Ti DirectCU II 1GB, Samsung 830series 512GB SSD, Corsair AX850w, two BENQ screens and TM HOTAS Warthog DCS: A-10C Warthog FAQ | DCS: P-51D FAQ | Remember to read the Forum Rules | | | Life of a Game Tester
Madman777 Posted November 5, 2011 Author Posted November 5, 2011 Sorry. Here is the tracktrimming issue.trk i7-12700k, 32GB Ram, RTX 3060 12GB, TrackIR 5, Lots of SSD Space, etc etc DCS World - All the cool modules
spikenet Posted November 7, 2011 Posted November 7, 2011 When I hold down the trimmer button is when it seems to get very twitchy. any luck finding a solution? I find the same thing, seems to get very sensitive when I hit the trimmer. I just want it to fly the same as BS1 but it doesnt feel the same.
Madman777 Posted November 7, 2011 Author Posted November 7, 2011 any luck finding a solution? I find the same thing, seems to get very sensitive when I hit the trimmer. I just want it to fly the same as BS1 but it doesnt feel the same. Yes. It turns out it was my Saitek SST profiling software. It was repeating my x & y inputs, as well as rudder inputs. I doubt this would be a solution for anyone else. I also spent several hours tweaking the settings in game. The response curves..etc. I have finally fixed it and now can fly properly. i7-12700k, 32GB Ram, RTX 3060 12GB, TrackIR 5, Lots of SSD Space, etc etc DCS World - All the cool modules
astrospud Posted November 7, 2011 Posted November 7, 2011 Madman777, I originally (BS1) assigned trimmer to my pinky trigger(button 6), and it performed as expected. However, I have re-assigned pinky trigger to trimmer in BS2 and I get no response. All my bindings are done ingame, and not using the Saitek software. I understand that in A-10C can use the pinky as a shift state modifier like shift, ctrl and alt, but it doesn't come up in the modifier list in BS2. I am happy with this as it should mean I can assign it as a trimmer. However, this is not so. Button 6 shows to be assigned in the bindings list, but doesn't perform. I have attached my input map as txt file.ka-50_joystick_Saitek X52 Pro Flight Controller {B5783320-411F-11e0-8001-444553540000}.txt Rectum non bustus
Recommended Posts