Jump to content

Recommended Posts

Posted

Hello,

it's possibile trought the TARGET SCRYPT get two separate device (as default) instead of the Combo (thrustmaster combined), can i do this with the TARGET Scrypt?

 

I want to create a profile with the TARGET SCRYPT and I would like to use the devices into separate mode "Joystick - HOTAS Warthog" and "Throttle - HOTAS Warthog" as the default without any load profile, they are read so that DCS A10 in default mode, but if you load any profile through the TARGET SCRYPT or GUI they become a single component named "thrustmaster combined"

and obviously you can only use 32 directx inputs.

I would like to program them separately to take advantage of directx 32 for each device (32 for the throttle and 32 for the Sitck), because I would like to take advantage of directx input instead of keyboard input.

I would use the directx because the directx not create conflicts with Windows 7 even if they are held down for a long time or in combination, on the contrary, if you run a sequence of keys pressed and held, could create problems in windows.

Thank you

www.69squadrone.it

 

GigaByte X58A-UD7 rev 2.0 -- Intel i7 950 3.06 Ghz (OC 3.20) -- Geforce GTX 750Ti -- DDR3 Corsair 2000 mhz 12 GB -- HD SSD Crucial 1Tb --

HD WD raptor SATA2 150 GB x 10000 rpm -- Cooler Master Silent Pro Gold 800 W -- Windows 7 Professional 64bit --

Hotas Cougar n° 01909 -- Hotas Warthog n° 08070 -- Console MFD self made with X-key -- Monitor DELL 24 Inch

 

please... please... please... let next DCS module be a F18 :worthy:

[sIGPIC][/sIGPIC]

Posted

If you don't use TARGET, each device will show up as it's own controller and will work as designed with DCS: A-10C. Each button /switch will be sent as a directX button (though there are not a full 32 buttons on the stick).

 

AFAIK, TARGET is limited to emulating a single directx device. What specifically are you trying to do (function-wise) that you cannot do using the sticks without TARGET?

Posted

Correct. There is no way to get Target to create more than one device.

 

As far as conflicts go, if you create your script correctly they can generally be elimated.

ASUS ROG Maximus VIII Hero, i7-6700K, Noctua NH-D14 Cooler, Crucial 32GB DDR4 2133, Samsung 950 Pro NVMe 256GB, Samsung EVO 250GB & 500GB SSD, 2TB Caviar Black, Zotac GTX 1080 AMP! Extreme 8GB, Corsair HX1000i, Phillips BDM4065UC 40" 4k monitor, VX2258 TouchScreen, TIR 5 w/ProClip, TM Warthog, VKB Gladiator Pro, Saitek X56, et. al., MFG Crosswind Pedals #1199, VolairSim Pit, Rift CV1 :thumbup:

Posted
If you don't use TARGET, each device will show up as it's own controller and will work as designed with DCS: A-10C. Each button /switch will be sent as a directX button (though there are not a full 32 buttons on the stick).

 

AFAIK, TARGET is limited to emulating a single directx device. What specifically are you trying to do (function-wise) that you cannot do using the sticks without TARGET?

 

Nothing Feed!! I just wanted to create a profile with TARGET (with some custom commands through the use of S4 lever as shift) and I wanted to use exclusively directx input, without using the keyboard commands.

But thanx anyway for the reply

www.69squadrone.it

 

GigaByte X58A-UD7 rev 2.0 -- Intel i7 950 3.06 Ghz (OC 3.20) -- Geforce GTX 750Ti -- DDR3 Corsair 2000 mhz 12 GB -- HD SSD Crucial 1Tb --

HD WD raptor SATA2 150 GB x 10000 rpm -- Cooler Master Silent Pro Gold 800 W -- Windows 7 Professional 64bit --

Hotas Cougar n° 01909 -- Hotas Warthog n° 08070 -- Console MFD self made with X-key -- Monitor DELL 24 Inch

 

please... please... please... let next DCS module be a F18 :worthy:

[sIGPIC][/sIGPIC]

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...