Jump to content

Recommended Posts

Posted

Hey guys,

 

Im using a TM Warthog stick and the TMS and DMS buttons are not working.

DMS aft and DMS left are working but the others dont. I have run the T.A.R.G.E.T software and everything is working fine in there and the buttons are also working fine in other games.

I have tried reloading the profile in DCS: A-10 and also re-assigning the buttons but they are still not working. The default keyboard commands do work.

Im running version 1.1.0.9 of the game, is this a known bug with this version?

 

Any help would be much appreciated, thanks!!

Posted

mmhhhh I dont think that the problem it's the patch version...

but... obviously the best thing (whatever) is that you install the latest version 1.1.1.1

It is recommended the Full install and not only the patching.

 

But before try to unistall and reinstal, you've try to run DCS in default mode without load the profile in the HW via TARGET?

www.69squadrone.it

 

GigaByte X58A-UD7 rev 2.0 -- Intel i7 950 3.06 Ghz (OC 3.20) -- Geforce GTX 750Ti -- DDR3 Corsair 2000 mhz 12 GB -- HD SSD Crucial 1Tb --

HD WD raptor SATA2 150 GB x 10000 rpm -- Cooler Master Silent Pro Gold 800 W -- Windows 7 Professional 64bit --

Hotas Cougar n° 01909 -- Hotas Warthog n° 08070 -- Console MFD self made with X-key -- Monitor DELL 24 Inch

 

please... please... please... let next DCS module be a F18 :worthy:

[sIGPIC][/sIGPIC]

Posted

Thanks guys, im not using target to run the profile only used it to make sure all the buttons were working ok.

Posted

I agree with Badger. Do a complete uninstall and reinstall the newest client. Patching over old versions sometimes causes issues.

Posted

And if the problem persists, rename this folder:

C:\Users\XXXXXXX\Saved Games\DCS Warthog

 

This will cause the game to not find it on the next start, and it will create a new, blank, one. If your files are corrupted, this should solve the issue.

[sIGPIC][/sIGPIC]

Daniel "EtherealN" Agorander | Даниэль "эфирныйн" Агорандер

Intel i7 2600K @ 4.4GHz, ASUS Sabertooth P67, 8GB Corsair Vengeance @ 1600MHz, ASUS GTX 560Ti DirectCU II 1GB, Samsung 830series 512GB SSD, Corsair AX850w, two BENQ screens and TM HOTAS Warthog

DCS: A-10C Warthog FAQ | DCS: P-51D FAQ | Remember to read the Forum Rules |

|
| Life of a Game Tester
Posted
And if the problem persists, rename this folder:

C:\Users\XXXXXXX\Saved Games\DCS Warthog

 

This will cause the game to not find it on the next start, and it will create a new, blank, one. If your files are corrupted, this should solve the issue.

 

I would probably try EtherealN's suggestion, just for grins, while you are downloading the 1.1.1.1 install files. If it doesn't work, you are no worse off and you can put it back if you like.;)

ASUS ROG Maximus VIII Hero, i7-6700K, Noctua NH-D14 Cooler, Crucial 32GB DDR4 2133, Samsung 950 Pro NVMe 256GB, Samsung EVO 250GB & 500GB SSD, 2TB Caviar Black, Zotac GTX 1080 AMP! Extreme 8GB, Corsair HX1000i, Phillips BDM4065UC 40" 4k monitor, VX2258 TouchScreen, TIR 5 w/ProClip, TM Warthog, VKB Gladiator Pro, Saitek X56, et. al., MFG Crosswind Pedals #1199, VolairSim Pit, Rift CV1 :thumbup:

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...