Jump to content

Recommended Posts

Posted

As much as you probably don't want to hear this. Three letters, U. S. B. Or, you could open them up and look for a broken wire. After all I'm pretty sure they are no longer under warranty.

:joystick:

Posted

Thanks guys. I pulled it apart. I found that the wires going to the toe brake was broken. Fixed that and then had the idea to swap the pot from the toe brake to the axis. The ohm meter showed dead spots all over the place on the original. So it's back together now but not tested.

 

Menessis

Posted
Thanks guys. I pulled it apart. I found that the wires going to the toe brake was broken. Fixed that and then had the idea to swap the pot from the toe brake to the axis. The ohm meter showed dead spots all over the place on the original. So it's back together now but not tested.

 

Menessis

That's the spirit! Great!

Posted

Well I didn't even think to test the other pot. Never used the toe brakes......That thing is pretty flakey! Looks like I have to take it apart again.

 

BTW another thing that has always bothered me is this. My pedals have always been backwards. I have to reverse the axis "in game" to make them work. The weird part is I step on the rudder and they work like they should. But the pedals in the 3D pit are opposite????? So when I had them apart I plugged the wire into the opposite unused terminal. They work opposite to what they did but when I changed it in the setup the 3D pedals are backwards again.

 

Menessis

Posted
The weird part is I step on the rudder and they work like they should. But the pedals in the 3D pit are opposite?????

 

Are you really sure? Have a look what should happen :

rudderwork_zpse319bf89.jpg

Posted

Well ............get ready Peter!

 

I have been flying sims for a long time and I have been using the "bicycle" way of doing things.

 

Don't hurt yourself laughing! :(

 

Now I have to re learn what to do with my feet! OMG!

 

One embarrassed

Menessis

 

P.S. this is just between you and me right?

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...