Icebear

Hm, in the Ultra Leap Software it was detected all the time. Did you tried a different USB-Port?

Ok, got it! After installing the older Gemini Software, I had to copy the LeapC.dll file like Dentedend10 said, again. Now it works.

After deinstall the UltraLeap 5.3.1 Software and install the 5.17.1 Gemini I could activate the "Enable Hand Tracking module" in the Pimax XR Runtime. DCS starts, but in the Crystal it stays in the Pimax Home Screen. When I disable OpenXR Support in Ultraleap Control Panel Settings, DCS starts normal in the Crystal as it should. But then Hand tracking doesn´t work in DCS. When OpenXR Support is enabled, DCS starts normal in the VR-Preview Window on the Monitor and I can see my Hands there with perfect Finger tracking. But in the Pimax I can only see the Home Screen (the Alien Planet). Does anyone has an Idea what I can do, please?

I tried it now, but it doesn´t change. I still see the mix from the normal background and the floor of the hangar on the screen and the Pimax Home Screen in the Crystal.

Hello! I need your help please. I have installed my new Pimax Hand Tracking Module to my Crystal and installed the drivers. In the Ultra Leap Software it works. But when I start DCS I see this picture: In the Crystal I see the Pimax Home Screen with the Planet Surface. I can´t get the DCS-Picture in the Crystal. I tried to repair DCS, I dismantled the Handtracking Modul - nothing changed. When I start DCS without the Pimax Client running, it shows the normal 2D-Screen. What can I do?

Hey, is this project still alive? I couldn´t open a single Step-file I could find on github. I´ve tried Fusion360, Freecad and StepViewer and received an error message. Edit: I´ve found the Tutorial "Downloading & Importing OpenHornet Fusion360 Models" and will try it this way. Puh, it´s not easy for the start.

I love the way you are doing it and I´m really looking forward to it! And if it has to be really quick, you can do a Huey start up in under a minute I think (I never stopped time). Please stick with the Huey, at least for several more Campaigns PS: Where are you from CHPL, your english sounds very German

I play in VR, perhaps there is the different?

It is on 100%.

I have flown the two first missions and love your campaign so far! But I have one big problem, the voice overs are so quietly, that they are very hard to understand. I´ve found no solution for getting them louder.

I didn´t defined "Waffenauslöser" for myself, if I remember right. I just tried to bound it.

Thank you for your answer and that you try to help me! The "default.lua" aren´t different under "\joystick" and "\keyboard" and "Waffenauslöser" doesn´t exist in both files. In "\user\savedgames\..." I can find commands for "Waffenauslöser" in one of the "BU0836A Interface.diff.lua" Files and in the "Keyboard.diff.lua". Interface.diff.lua: (Here it is one of many commands) ["d84pnilu84cdnilvd1vpnilvu0"] = { ["name"] = "Waffenauslöser", ["removed"] = { [1] = { ["key"] = "JOY_BTN2", }, }, }, Keyboard.diff.lua: (Here it is the only command) local diff = { ["keyDiffs"] = { ["d84pnilu84cdnilvd1vpnilvu0"] = { ["added"] = { [1] = { ["key"] = "Enter", }, }, ["name"] = "Waffenauslöser", }, }, } return diff The device "microhelis..." is my rudder pedal and is programmed by the manufacturer. It works as it should. No, it is as I wrote it:

Hey, I´ve had a problem for a while and I can´t solve it. I´ve a self made button box with bodnar boards and controls which also works with bodnar boards. It all worked fine. For some time now, I can´t fire my weapons in the Huey with my Cyclic Stick and in the settings the weapon trigger (Waffenauslöser in german) appears twice. It isn´t possible to assign my cyclic to the lower one, but I can assign it to the upper one. But then nothing happens in the simulation. For testing, I assigned "space" to the lower one and it works in the simulation. What can I do?

That was my hope as i ordered my ForceFell Pad 1,5 years ago. Two Weeks ago I actually got it. But so far I'm rather disappointed. :( The Pad vibrates ( I fly mostly the Huey) and vibrates. Sometimes more, sometimes less. But how should this increase immersion? I didn't get it.

I tried that, no progress.

Now I am stuck to mission 8 :doh:

Now i´ve added your lines to the logbook: [9] = { ["mission"] = "WORLDS APART Mission 8.miz", }, -- end of [9] And could fly Mission 8. Now me logbook looks like this: [8] = { ["created"] = "Tue Oct 8 11:11:52 2019", ["player"] = "Neuer Pilot", ["campaign"] = "./Mods/campaigns/UH-1H Worlds Apart Spring 2025/WORLDS_APART_Spring_2025.cmp", ["status"] = "Aktiv", ["history"] = { [7] = { ["datetime"] = "Fri Oct 18 01:08:47 2019", ["agKills"] = 0, ["aaKills"] = 0, ["stage"] = 7, ["deathsCount"] = 0, ["result"] = 100, ["mission"] = "WORLDS APART Mission 6.miz", }, -- end of [7] [1] = { ["datetime"] = "Tue Oct 8 12:07:56 2019", ["agKills"] = 9, ["aaKills"] = 0, ["stage"] = 1, ["deathsCount"] = 0, ["result"] = 90, ["mission"] = "WORLDS APART Mission 1.miz", }, -- end of [1] [2] = { ["datetime"] = "Sun Oct 13 00:44:07 2019", ["agKills"] = 0, ["aaKills"] = 0, ["result"] = 100, ["deathsCount"] = 0, ["stage"] = 2, ["mission"] = "WORLDS APART Mission 2.miz", }, -- end of [2] [4] = { ["datetime"] = "Mon Oct 14 12:50:03 2019", ["agKills"] = 0, ["aaKills"] = 0, ["result"] = 100, ["deathsCount"] = 0, ["stage"] = 4, ["mission"] = "WORLDS APART Mission 4.miz", }, -- end of [4] [8] = { ["datetime"] = "Mon Oct 21 23:52:16 2019", ["agKills"] = 17, ["aaKills"] = 0, ["result"] = 100, ["deathsCount"] = 0, ["stage"] = 8, ["mission"] = "WORLDS APART Mission 7.miz", }, -- end of [8] [9] = { ["datetime"] = "Mon Oct 28 12:34:42 2019", ["agKills"] = 0, ["aaKills"] = 0, ["deathsCount"] = 0, ["result"] = 100, ["mission"] = "WORLDS APART Mission 8.miz", }, -- end of [9] [5] = { ["datetime"] = "Tue Oct 15 13:44:15 2019", ["agKills"] = 0, ["aaKills"] = 1, ["stage"] = 5, ["deathsCount"] = 0, ["result"] = 100, ["mission"] = "WORLDS APART Mission 5-1.miz", }, -- end of [5] [3] = { ["datetime"] = "Mon Oct 14 11:26:30 2019", ["agKills"] = 12, ["aaKills"] = 0, ["result"] = 100, ["deathsCount"] = 0, ["stage"] = 3, ["mission"] = "WORLDS APART Mission 3.miz", }, -- end of [3] [6] = { ["datetime"] = "Wed Oct 16 13:43:22 2019", ["agKills"] = 13, ["aaKills"] = 0, ["result"] = 100, ["deathsCount"] = 0, ["stage"] = 6, ["mission"] = "WORLDS APART Mission 5-2.miz", }, -- end of [6] }, -- end of ["history"] }, -- end of [8]

No, there isn´t this entry. The entries are not in the right order anyway This is my complete entry in the logbook für this campaign: [8] = { ["created"] = "Tue Oct 8 11:11:52 2019", ["player"] = "Neuer Pilot", ["campaign"] = "./Mods/campaigns/UH-1H Worlds Apart Spring 2025/WORLDS_APART_Spring_2025.cmp", ["status"] = "Aktiv", ["history"] = { [6] = { ["datetime"] = "Wed Oct 16 13:43:22 2019", ["agKills"] = 13, ["aaKills"] = 0, ["stage"] = 6, ["deathsCount"] = 0, ["result"] = 100, ["mission"] = "WORLDS APART Mission 5-2.miz", }, -- end of [6] [2] = { ["datetime"] = "Sun Oct 13 00:44:07 2019", ["agKills"] = 0, ["aaKills"] = 0, ["stage"] = 2, ["deathsCount"] = 0, ["result"] = 100, ["mission"] = "WORLDS APART Mission 2.miz", }, -- end of [2] [8] = { ["datetime"] = "Mon Oct 21 23:52:16 2019", ["agKills"] = 17, ["aaKills"] = 0, ["stage"] = 8, ["deathsCount"] = 0, ["result"] = 100, ["mission"] = "WORLDS APART Mission 7.miz", }, -- end of [8] [3] = { ["datetime"] = "Mon Oct 14 11:26:30 2019", ["agKills"] = 12, ["aaKills"] = 0, ["stage"] = 3, ["deathsCount"] = 0, ["result"] = 100, ["mission"] = "WORLDS APART Mission 3.miz", }, -- end of [3] [1] = { ["datetime"] = "Tue Oct 8 12:07:56 2019", ["agKills"] = 9, ["aaKills"] = 0, ["result"] = 90, ["deathsCount"] = 0, ["stage"] = 1, ["mission"] = "WORLDS APART Mission 1.miz", }, -- end of [1] [4] = { ["datetime"] = "Mon Oct 14 12:50:03 2019", ["agKills"] = 0, ["aaKills"] = 0, ["stage"] = 4, ["deathsCount"] = 0, ["result"] = 100, ["mission"] = "WORLDS APART Mission 4.miz", }, -- end of [4] [5] = { ["datetime"] = "Tue Oct 15 13:44:15 2019", ["agKills"] = 0, ["aaKills"] = 1, ["result"] = 100, ["deathsCount"] = 0, ["stage"] = 5, ["mission"] = "WORLDS APART Mission 5-1.miz", }, -- end of [5] [7] = { ["datetime"] = "Fri Oct 18 01:08:47 2019", ["agKills"] = 0, ["aaKills"] = 0, ["result"] = 100, ["deathsCount"] = 0, ["stage"] = 7, ["mission"] = "WORLDS APART Mission 6.miz", }, -- end of [7] }, -- end of ["history"] }, -- end of [8]

Unfortunately I did not have the time to fly in the last days. But I allways use the current open beta version.

Hello! I´ve done all missions before the update as single missions over the mission editor. Now with your fix, I'am doing all missions again as a complete campaign. But now I got the problem, that I can´t progress over Mission 7 (The "X-Field Mission"). I´ve done the Mission three times, every time with 100% without problems. But every time the campaign starts mission 7 again.

Erledigt, habe den Fehler selbst gefunden und nun hat es geklappt. :thumbup:

Erst mal ein großes Lob für deine tolle Kampagne! Macht wirklich Spaß sie zu fliegen, gerade wegen der vielen kleinen Details die du eingebaut hast. Schade das man zur Zeit quasi nicht drum herum kommt die Missionen einzeln über den Editor zu fliegen, ich hoffe ED bringt das Update mit deinen Korrekturen bald. Ich habe aber eine Frage zur Mission 6: Nach dem ich das Squad abgesetzt habe und die LKW markieren soll, werde ich beim Überflug der LKW immer von einem Black Shark abgeschossen. Egal wie hoch oder tief ich es versuche, jedes Mal holt der mich vom Himmel. Was mache ich falsch?

I have this problem, too. But in my case there was no savedgames\dcs.openbeta\mods folder. It doesn´t exist. So I unpacked all mod folders in ...\EagleDynamics\dcsworldopenbeta\mods\tech on my DCS-SSD. But then I received the error-message too. After that I´ve created am mods\tech folder in savedgames and copied the unpacked files there. But the error message still appears. Why are my folders in savedgames differently to yours?

Ok :lol: Da können wir ja lange suchen!

Ändert leider auch nichts. Doppelbelegungen sind immer noch da :cry: