Duracell65

So fired up the sim today and no issues. No idea what caused the issue or what solved it. I did try starting the sim without my WinWing Top Gun MIP and peripherals and noticed that the SA page was back to normal. Following this , I then reattached the MIP and peripherals (HOTAS etc.) and all was good again. I'll post again if the issue reoccurs but I suspect it was a hiccup with the SimAppPro app. Thanks for all the response so far, much appreciated.

I don't use any mods. Just ran a repair and still have the same issue. Have I simply forgoten to turn something on, been 2 weeks since I last fired up the sim... I'll post additional info tomorrow, thanks for all the responses so far.

I'm not able to use any of the functions on the SA page that were available in the previous DCS release now, none of function keys on the DDI show a reference function when the SA page is selected. Anyone else seeing this?

In case anyone is interested I today found the cause of micro stutters occurring when running campaigns. Turns out that the issue was caused by Tacview, after disabling Tacview within the DCS Special settings the micro stutter has gone away completely and I now have a stable FPS!! I must give the credit to the Discord DCS Eagle Dynamics dcs-log-analyzer forum, after uploading my DCS log file to it it made a number of recommendations to improve my performance; however, the only recommendation that had a noticeable effect was disabling Tacview.

I am experiencing frame stutter for all missions in the Operation Cerberus North Campaign, I have completed the first 4 missions and all of them have had this issue, the stuttering is worse at the airfield but also occurs in flight when there is very little detail to see. I used to see this issue on my old rig but have not seen it since updating it about 4 months ago. What is also odd is the it only seems to occur in this Campaign specifically. Other Campaigns e.g. Both Raven One Campaigns I get consistently over 100 fps, with Operation Cerberus North my fps maxes out at around 60 with my 3090 GPU running at only 60% capacity. Stuttering is worst around airfields and turning down visibility and details does not seem to have an effect. Attached are my system details and the dcs.log file.dcs.log DxDiag.txt

Any update to this topic, I too am experiencing frame stutter for all missions in the Campaign so far. It only seems to occur in this Campaign specifically. Other Campaigns e.g. Both Raven One Campaigns I get consistently over 100 fps, with Operation Cerberus North my fps maxes out at around 60 with my 3090 GPU running at only 60% capacity. Stuttering is worst around airfields and turning down visibility and details does not seem to have an effect.

FYI, I found some service issues in the event log to do with DCOM and a Gamer service, fixed these and retried MT DCS. It crashed again after about 30 mins in a different mission. I'm switching back to the no threads version. dcs.log dcs.log-20240331-173043.zip

So ran the MemTest86 twice now, first time I just let it run because the info I found online about it said that the results would be posted in the event log... However, I could not find the results only the scheduled start 'MemoryDiagnostics-Schedule', its apparently supposed to post a result with the heading 'MemoryDiagnostics-Result' in the event log but I cannot find this or any related event other than the schedule event mentioned earlier. That said, I watched the first test till 100% on the first pass, and the second test through to 100% on both passes, no errors were found. I have since restarted the mission 15 in the campaign with Multi-Threading disabled, this time the mission did not crash. Get shot down by an SA3 on the way home though... dcs.log

Thanks for the tip, I'll try a mem test later, please find attached the zip file you requested. dcs.log-20240330-122802.zip

Hi, whilst attempting to complete Raven One Dominant Fury campaign, mission 15, the game crashes at random points during it. I say random but the game has crashed at least 4 times during or just after the in flight refueling at the start of the mission. Very frustrating! I cannot say if the issue involves this specific mission or if the issue was introduces after the last update, I have not run any missions in the RODF campaign since the update. I've run a full check on the game files and no problems were detected. I've also turned off all unnecessary tool/apps like the Riva tuner and AI Suite 3. I have attached the latest dcs.logs that contains the last two crashs, they contain the following pointers. Ill try and re-run the mission again without using the multi-threaded version. Any help would be greatly appreciated: Todays crash: 2024-03-30 12:28:01.952 INFO EDCORE (Main): try to write dump information 2024-03-30 12:28:01.996 INFO EDCORE (Main): # -------------- 20240330-122802 -------------- 2024-03-30 12:28:01.996 INFO EDCORE (Main): DCS/2.9.3.51704 (x86_64; MT; Windows NT 10.0.22631) 2024-03-30 12:28:01.996 INFO EDCORE (Main): E:\Eagle Dynamics\DCS World OpenBeta\bin-mt\edCore.dll 2024-03-30 12:28:01.997 INFO EDCORE (Main): # C0000005 ACCESS_VIOLATION at 00007ffc67718785 00:00000000 2024-03-30 12:28:01.997 INFO EDCORE (Main): SymInit: Symbol-SearchPath: 'E:\Eagle Dynamics\DCS World OpenBeta\bin-mt;', symOptions: 532, UserName: 'stuar' Yesterday last crash: 2024-03-29 17:41:14.581 INFO EDCORE (5700): try to write dump information 2024-03-29 17:41:14.689 INFO EDCORE (5700): # -------------- 20240329-174114 -------------- 2024-03-29 17:41:14.689 INFO EDCORE (5700): DCS/2.9.3.51704 (x86_64; MT; Windows NT 10.0.22631) 2024-03-29 17:41:14.690 INFO EDCORE (5700): E:\Eagle Dynamics\DCS World OpenBeta\bin-mt\dx11backend.dll 2024-03-29 17:41:14.690 INFO EDCORE (5700): # C0000005 ACCESS_VIOLATION at 00007ffb31eb694c 00:00000000 2024-03-29 17:41:14.690 INFO EDCORE (5700): SymInit: Symbol-SearchPath: 'E:\Eagle Dynamics\DCS World OpenBeta\bin-mt;', symOptions: 532, UserName: 'stuar' dcs.log dcs.log.old

I'll check this out, thanks for the feedback.

Dear DCS chaps, Is there a way of modifying my configuration so that when I'm in my A10C II I see the main view of the cockpit running on my 49 inch monitor in the center with it running in a 32inch sized screen with the MFD's running in the spaces on the unused portions left and right of the main view? I see an option in for the screen configuration to split the screen in to 3 equal parts but I'd like to modify the aspect ratio of the main view (cockpit) so that is larger in proportion then the MFD screens. In addition, is there a way to just have the main view running on a 27 or 32 inch portion centered on my 49 inch monitor so that I only see black bars on either side? Thanks in advance, Stuart