inZane
-
Posts
149 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by inZane
-
-
I flight mate of mine got engaged and shot down by an SA-15 while at or near 40,000 ft. This is completely outside the range of the SA-15.
We have either have the 9K330 Tor (1986) or 9K331 Tor-M1 (1991) which was introduced with the 9M331 missile,
which is more likely. the 9M331 has max altitude of 10km (~32,000 ft) and range of 16km (~10 miles). The Tor-M2E (~2007) still uses 9M331 missiles but greater tracking.I am positive we are not using the 9M338 missile for the Tor-M2E or better variant as that has a similar envelope as the other 2 missile variants
I will try to get a track file as soon as I can, but thought I would bring this to your attention.
EDIT: I made a couple errors on the missiles. Here is some info on the 9M338 in the Tor-M2DT (2017). The 9M331 has 12 km maximum range and 6 km ceiling. The newer 9M338 can reach altitudes up to 10 km with the same range.
-
Run a Trace Route to cdn.digitalcombatsimulator.com and post it. We can see where it stalls.
-
Since this all started I just put mine in bypass. At least I dont drop 60 chaff/flares constantly. Maybe I will change back to the CMS programs when they fix the issue.
-
10 hours ago, Qcumber said:
By "true PCVR" I presume that you mean a dedicated DP connection without any compression. DP will be better from a technical point of view but in terms of user perception the differences are likely to be negligible. As long as the headset is properly configured and the user knows what they are doing and can optimise the bitrate, video codec and other related settings (e.g. router for VD etc.).
Yes true or pure PCVR is a DP connection which doesnt require compression. And you are right, as long as the headset is configured properly it would be negligable. Unfortunately, not all users know the full in's and out's of the Meta setup as it can be a tad finicky. I had a Quest 2 and it was "ok" but not what I wanted out of the headset. Luckily I was able to sell it for what I paid for it and bought a Pimax CL. The difference between the 2 is huge. I have had no experience with the Quest 3, so I wont comment on that.
10 hours ago, Qcumber said:Do you mean Q2 or G2? The context of your comment (DP Vs link compression) suggests that you mean "..get the most out of the G2". If that's what you mean then yes, you should always aim the get the most out of any headset you have before going down the upgrade route. I still have a rift s and learned so much about VR using this headset. I still go back to it occasionally to apply new knowledge and experience to see how I can get more out it.
I mean Quest 2.
-
1
-
-
2 minutes ago, diego999 said:
I'm still using it.
Yes. it is still out there in the wild, but OTT has closed their website and there is no support. I guess saying it doesnt exist was the wrong word. On the internet, everything still exists somewhere.
-
@BIGNEWY has there been any updates on this? I have skimmed patch notes and have not found any mention of it.
-
1
-
-
I Meta headset uses compression for PC gaming, whether using link cable or air link. What happens in the software compresses the video to pass to the headset that decompresses it to display. This causes issues and will never be as good as a true PCVR headset. There are hundreds of videos on YouTube that can show you how to get the most out of the Q2. There is one app that doesnt exist anymore and that is Occulus Tray Tool.
-
20 minutes ago, ghostmail1999 said:
Just now in single player, after 15 minutes of playing the Afghanistan map, it's just a flipbook. The CPU cores are around 80 degrees. The multiplayer servers should downgrade so that we can play again with the stable version 2.9.15.9599.1 - May 5, 2025.
Each owner of the server would have to be the ones to make that decision, not ED. As for cores around 80c will depend on a number of things. What is your CPU? What is your idle (pre-DCS launch) temps, your temps in menu. Are you air cooled, AIO, custom water? Depening on some of those factors will determine your temps. Also, what is a temp of another DX11/12 game that you have that will push your system/graphics?
-
9800X3D here and not seeing much higher temps in DCS than any other DX11/12 game I have. This screenshot is just from DCS running and the Max temps are on the right. 74c for a processor isnt that far from normal function. rest of my PC in in my sig.
null
-
-
https://www.digitalcombatsimulator.com/en/downloads/documentation/dcs-supercarrier_operations_guide_en/ is a very good place to start. Also, there are tons of good YT videos out there about how to be a Navy Bug pilot.
-
1
-
-
VAF has opened recruiting for all 3 airframes. F16C, F15E and F/A18C. If you wish to join, use the discord link above.
-
VAF has opened recruiting for all 3 airframes. F16C, F15E and F/A18C. If you wish to join, use the discord link above.
-
1
-
-
@BIGNEWY Any idea why this is happening. This has occurred on the last 2 patches plus the new Germany map download.
Edit: I have my main DCS folder and saved games folder excluded from my AV.
-
2
-
-
SaskTel is my ISP in Canada. This has happened on the new Germany map download and both patches.
-
On 4/14/2025 at 11:13 PM, pegasus1 said:
Can i just confirm both the Bin and Bin MT folders are still required.
The reason i ask is that i noticed DLSS files in both, i was running DLSS setting K but after the recent update its gone back to the inferior C.
I was about to add K back into the folder when i noticed both the Bin and Bin MT have DLSS files in them.
Everytime you patch DCS, you need to replace those DLSS files again as they will be overwritten.
-
2
-
-
Just now, WolfK33 said:
Same here
One sqdn mate said it took him 3 hours to download on a 2Gbps connection
-
Was going great up until the 19GB mark of the download and then it fell off a cliff getting between .4 and 2.0 MBps. Same thing with the last patch as well at a certain point. Everyone is my group is complaining of the same thing, so it is not our internet as we are all in different locations.
-
If you use the ED launcher, disable it and try again. I have had others have issues and it was the launcher.
-
I run a 4080 Super and am not experiencing ghosting or jitter. 9800X3D + 64GB DDR56000. You could post screenshots of your ingame settings plus your PIMAX settings and then we could get a better idea of where the issue might be coming from
-
This is happening in the F-18C ATFLIR as well. it is any and all static objects (ships, runways, buildings, trees, etc)
-
Confirmed the SA is broken on all MFD and MPCD. Will watch for an update, if there is one possible.
-
There is a post about this exact thing.
-
1
-
-
5 hours ago, Jel said:
With the new deck crew update, you always get directed to cat 1 - no matter if this cat is available or full of parked aircraft.
I have been guided to Cat 4 and 3 when 1 and 2 were occupied, but that was from elevator 4. I think if you are on elevator 2 you get put onto cat 1 or 2.
SA-15 launching on aircraft up to 40,000 ft - accurate. no longer an issue
in Ground AI Bugs (Non-Combined Arms)
Posted · Edited by inZane
image.png
with this new information, this is no longer an issue. 12 km in height is just under 40k ft.