Moxica
-
Posts
937 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Moxica
-
-
Good thing about a jet engine; It eventually stops whining.
-
5
-
-
Sad news, but I'm cheering for Heatblur's fantastic attitude and work ethics.
Godspeed guys!
(One also says "Guy" about girls nowadays, right?. Well I do anyway; Girls included.)-
4
-
-
It is the "Gun 15cm C/21 Naval in bunker"
No matter how I rotate it on the map, it still points in the same (wrong) direction in-game.
(Falklands map)
-
55 minutes ago, MAXsenna said:
Roger! Same as me then.
Sent from my SM-A536B using Tapatalk
Cool!
On mission00, though.. You'll have to use machine gun. (Tug boat mission)
-So I tried, and I discovered I'm getting better.
And then I tried the machine gun (In stead of HOT3) on mission 01, and it worked great.
Som holes in canopy, but landed safely after:
Mission success!
Very nice campaign. @Chef98 should make more Gazelle stuff.
Good music choices, but in spite of that, I took out some of the music.
-I like the rotorsound better.-
1
-
-
45 minutes ago, MAXsenna said:
I'm playing that one as well. Only mission 3 so far. Will see if can get there. How do chose the M at mission start?
I used the mission editor, and changed all to the M.
I fly the M only.
Great campaign, by the way.-
1
-
-
40 minutes ago, MAXsenna said:
I see. Well, the devs will need tracks I guess.
Sent from my SM-A536B using Tapatalk
Well, this was mission 6 i think, from the Combat Order - Falkland 1982 V1.1 campaign.
It took hours before I had to give up.-
1
-
-
15 minutes ago, MAXsenna said:
But chance. Did you re-center the sight while moving it?
Sent from my SM-A536B using Tapatalk
Don't think so. I turned it off every time I went back to the boat to rearm. Last (seventh) time I turned it on, it was like that.
-
On 3/5/2024 at 10:24 PM, MAXsenna said:
Have you guys set a deadzone for whatever you use to slew the VIvianne?
Sent from my SM-A536B using Tapatalk
I was just thinking about that just now, as I've flown for HOURS when suddenly it stopped working, and it just hangs there like a fricken paralyzed leg on a broken spine. "Boresight" does nothing.
But I checked, and there is no signal when centered. Even if that was the culprit, how can one reactivate, Because it does not react to any input.
Damn that was way more than annoying!
My beer went all flat from me cursing, -
Depending on the position of the virtual switch at the start of mission, it often has reversed position in relation to the one one my throttle..
Up becomes down.. on becomes off.
Same goes for the magnetic brake.
"Very nuisance" -
The brightness and the contrast controls (pots) can be assigned. But the increments are to large, and is stepping about 1/5 with each step.
I have assigned them to arduino rotaries,, still with the same result, making it impossible to adjust to a useful level. -
Hmm..
I have assigned the HOT3 selector to a rotary.
Sitting here at work, I wonder if that one "ASS/Boresight" control is also bound to the (next) rotary, and that I might have come to touch that one by accident from time to time..
Fumbling blindly from behind the VR goggles. You know.. Those things happen.
Thx for bringing it to my attention, MAXsenna!-
1
-
-
Thx. I'll look for an update on Massun's..
Hope there's a field shower included now.
-
1
-
-
1 hour ago, MAXsenna said:
You know the switch you dial all the way CW, and one step back (CCW), to make it gyro stabalized? If you click it all the way CW. That's boresight. Btw. It's completely normal that the screen goes black when the camera is looking into the housing. If you want it to turn back to the point you are already aiming, just turn slowly around until it's natural for the camera to turn around again. I assume you somtimes see the rotor spinning? That's the opposite extreme, for the camera, compared to look into the housing.
Cheers!
PS: I'm soon home, and I'll grab a screen.
Edit: IIRC. If the camera is looking at the rotor, turn left. If it is black and is looking into the housing. Turn right.
Sent from my SM-A536B using Tapatalk
Yeah. I know which button you mean. I'll try. (I think I've triad allready, though. You know.. "clicking everything" when having a malfunction..)
Thing is; Re-center stops working, Annoying af. -
Is he from a mod, or one of the default crew?
Because he is smoking when hit.
-
1
-
-
On 3/2/2024 at 3:57 PM, MAXsenna said:
Switch it to boresight instead?
Whaddyamean boresight? Wut?
-
I can confirm the uncontrollable drift; Monitor goes black, re-center button does nothing until suddenly monitor comes to life, but camera is uncontrollable.
I've had to give up countless missions because of this. -
Here's an "official" quote:
"The TSD can display more than 16 targets when set to the attack phase, but all low-priority target symbols will be displayed at half the size as the 16 high-priority target symbols.The C-SCOPE and ZOOM functions on the FCR page are not currently implemented, nor is the LINK function on the Sight-Select switch. These will come later in early access, along with other radar modes."
I'm hoping the "ZOOM" function helps distingushing targets on FCR.-
1
-
-
54 minutes ago, Gunfreak said:
Again, you can download the dedicated server program (if you got 200 ekstra gig laying around)
Dedicated server tracks together with the track improvements in 2.9 means they work more than they fail.
Even missions lasting an hour seems to have tracks working.
When you run a mission on the dedicated server. 2 tracks are made. 1 in in your dcs tracks/multiplayer folder and one in the tracks folder in the dedicated server folder. I've found that it varies a bit which of the tracks work best. Sometimes the one in your dcs folder sometimes the one in the dedicated server folder.
Sounds like rocking good news!
Thanks a lot. I had no idea!
-
I'd like to do a cinematic.
I tested on a short mission yesterday.
But on replay, all the Gazelle's missiles went straight into the ground.
Looks like I can not use the replay method -
..so I tried a mission on Normandy, and it gives me half of the framerate compared to other maps (I.e. South atlantic)
Install prompt is still there. -
I started install, and it downloaded, but ended like this.
00000.088 --- Log file: F:\Eagle Dynamics\DCS World\autoupdate_log.txt
00000.000 === Log opened UTC 2024-02-25 20:53:05
00000.020 INFO : DCS_Updater/2.16.2.17 (Windows NT 10.0.22631; Win64; nb-NO)
00000.020 INFO : src-id: 5972e82a1851d36865c17506579c27cbd5b8e3b4, lib-id: b88ea51ae2210987a3865f77cc1802548216d7a8
00000.020 INFO : cmdline: "F:\Eagle Dynamics\DCS World\bin\dcs_updater.exe" apply e69b5405-19ba-4c56-b2da-26a79bce11bb 5856
00000.060 STATUS: Initializing...
00000.085 INFO : basedir: F:\Eagle Dynamics\DCS World
00000.087 INFO : Command: install NORMANDY_terrain_new
00000.089 INFO : DCS/2.9.3.51704 (x86_64; EN; WORLD,A-10A,MARIANAISLANDS_terrain,A-10C_2,A-10C,PERSIANGULF_terrain,AH-64D,SYRIA_terrain,F-16C,NEVADA_terrain,BALTICDRAGON_A10C_IRON_FLAG_PART1_campaign,GROUND_POUNDER_SIMS_A10C_OPERATION_PERSIAN_FREEDOM_campaign,BALTICDRAGON_A10C-ENEMY_WITHIN_3_campaign,SUPERCARRIER,FA-18C,SU-33,SPITFIRE-MKIX,WWII-ARMOUR,THECHANNEL_terrain,POLYCHOPSIM_SA342,UH-1H,A10C-TTQ_campaign,A10C-BFT_campaign,FALKLANDS_terrain,COMBAT_KING_SIMULATIONS_A-10C_OPERATION_AGILE_SPEAR_campaign,BADGER633_FA18C_RISE_OF_THE_PERSIAN_LION_campaign,NORMANDY_terrain,BALTICDRAGON_FA18C_RAVEN_ONE_campaign,REFLECTED_SIMULATIONS_UH-1H_PARADISE_LOST_campaign,AJS37,P-51D,CA,BADGER633_FA18C_RISE_OF_THE_PERSIAN_LION_II_campaign,HEATBLUR_F-14,REFLECTED_SIMULATIONS_SPITFIRE_BEWARE_BEWARE_campaign,A10C-STONE_SHIELD_campaign,CAUCASUS_terrain,BF-109K4,MOSQUITO-FBMKVI,P47D30,SPITFIRE-MKIX-THEBIGSHOW_campaign,STONE_SKY_MAD_AH-64D_campaign,SINAIMAP_terrain,LOOKING_GLASS_FA18C_INHERENT_RESOLVE_campaign,STONE_SKY_MAD_campaign,F-86F,RAZB8
00000.089 INFO : branch:
00000.090 STATUS: Downloading version info...
00000.872 STATUS: Preparing to install NORMANDY_terrain_new ...
00000.961 STATUS: Unknown module NORMANDY_terrain_new
00051.148 === Log closed.
null
-
I still havent made a single DCS movie yet, but this is what I figured:
(I once capured from VR, and it was a shaky mess)I fly in VR, so I'd have to save a track file?
I'd have to change monitor resolution to use full screen flat PC monitor as source?
I'd have to capture same track multiple times from different angles?Will that be the most usual way to do it, or am I missing some more efficient steps?
(Not asking about fancy camera positions and shortcuts for those. And I know how to edit movies once I have the footage.) -
11 hours ago, sthompson said:
It gets created when you use the original installer. If you reinstalled Windows or copied DCS from another system then those keys won't be present. They aren't needed by DCS itself as nearly as I can tell. But programs like VAICOM PRO look for them to find your DCS installation.
Makes sense; I got a New PC, and just put the old drive into the new one, and the copied installation to an M2 drive.
-And now that Beta is gone, what to do with all that extra space?
:P -
Thanks, but but there is no "Eagle Dynamics" under HKEY_CURRENT_USER\Software in my registry.
I'm doing backups an removing as per BigNewy's advice.
Massun92´s Asset Pack - Official (update march 2024)
in Static/AI Mods for DCS World
Posted
This one of your guys?
They shure can take a beating.