DarkSideMaster

Yeah? And what? You are so smart!!!!!! I don`t know exactly what it is. I think it was mod BY CURRENTHILL - ruZZian armor. I deleted it and this bug is gone. But I don’t know how this was connected and what the F-16С has to do with it.

Problem solved

I already do this.

Any suggestions?

The procedure that leads to CTD CBU-97 on the pylon 1. Press A-G 2. Press CCIP 3. Press CCRP and I have CTD Sorry, I can`t give you .trk file, because the DCS has crashed. dcs.log-20240323-080204.zip

Hello! When I tried to change (in A-G mode) mode CCIP to CCRP ( for CBU-97) the DCS was CTD. ^( My log is attached to this post and also I uploaded this log to the server as a crash report. dcs.log-20240322-205046.zip Windows Error Reporting: +++ WER0 +++: Fault bucket 1410151695329861261, type 4 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: DCS.exe P2: 2.9.3.51704 P3: 65d64608 P4: F16C.dll P5: 2.9.3.51704 P6: 65d4b6c3 P7: c0000005 P8: 00000000003bf96d P9: P10: +++ WER1 +++: Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: DCS.exe P2: 2.9.3.51704 P3: 65d64608 P4: F16C.dll P5: 2.9.3.51704 P6: 65d4b6c3 P7: c0000005 P8: 00000000003bf96d P9: P10: +++ WER2 +++: Fault bucket 1410151695329861261, type 4 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: DCS.exe P2: 2.9.3.51704 P3: 65d64608 P4: F16C.dll P5: 2.9.3.51704 P6: 65d4b6c3 P7: c0000005 P8: 00000000003bf96d P9: P10: +++ WER3 +++: Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: DCS.exe P2: 2.9.3.51704 P3: 65d64608 P4: F16C.dll P5: 2.9.3.51704 P6: 65d4b6c3 P7: c0000005 P8: 00000000003bf96d P9: P10: +++ WER4 +++: Fault bucket 1964321058713204160, type 4 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: DCS.exe P2: 2.9.3.51704 P3: 65d64608 P4: dxgui.dll P5: 2.9.3.51704 P6: 65d3cb07 P7: c0000005 P8: 000000000007f316 P9: P10: +++ WER5 +++: Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: DCS.exe P2: 2.9.3.51704 P3: 65d64608 P4: dxgui.dll P5: 2.9.3.51704 P6: 65d3cb07 P7: c0000005 P8: 000000000007f316 P9: P10: +++ WER6 +++: Fault bucket 1735100622160401899, type 5 Event Name: RADAR_PRE_LEAK_64 Response: Not available Cab Id: 0 Problem signature: P1: DCS.exe P2: 2.9.3.51704 P3: 10.0.19045.2.0.0 P4: P5: P6: P7: P8: P9: P10: +++ WER7 +++: Fault bucket 120858127557, type 4 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: bad_module_info P2: 0.0.0.0 P3: 00000000 P4: StackHash_0000 P5: 0.0.0.0 P6: 00000000 P7: c0000005 P8: PCH_84 P9: P10:

@Lord Vader I chose a target at a distance of 2.2 nm on the ground. Maverick and TGP were aligned. However, when approaching the target, he again failed to capture it in AUTO mode (TMS up when TGP is SOI), since the target was not in the crosshairs of the missile's sight. But yes, this time the target was much closer to the crosshair. But not in the center of the sight, due to which the target was not locked in AUTO mode

Yes, it is correct. How did I not see it... But if it sounds like this: Choosing a target further away (minimum 2 nm) will reduce parallax errors. Because a beginner simply may not understand what is meant by the words "reduce parallax errors". But the phrase "to choose a target that is no closer than 2 miles" sounds very clear. Add this note to the documentation, please. Please, please...

You're absolutely right, the Maverick launches over 2 nm. But a beginner may simply not be aware of the parallax effects and spend a lot of time trying to figure out what's going on. I have used F-16C for more than 1 year, but I'm tired of this problem just now. And I did not find the answer in the documentation ( It's good that you answered me, otherwise, I would have suffered further with this problem. PS I will test that feature on 2 nm on the ground now.

Hello @Lord Vader, thank you for your answer. Okay, I will test that feature at a distance near 2 nm on the ground and will report to you. But add this important note to your manual, please. Because there is no information about such a feature anywhere. PS For the first time I hear information about a distance of at least 2 miles

Yes, but the training says that it is possible to carry out the alignment on the ground. This means that on the ground all targets are located close to the aircraft And there is no mention of parallax effects on the ground. Then either incorrect training mission or incorrect behavior of the Maverick during the alignment on the ground. Maybe this effect should be removed altogether and not confuse the player.

Good afternoon! There is the following problem with the coordination of the Maverick rocket. If you start the mission from the cold and dark, you need to coordinate the maverick with the TGP. If you do this on the ground, then (later, when approaching the target) you will see that the Maverick's crosshairs are still not accurately aimed at the target. You need to search for the target using the Maverick's crosshairs manually. Which greatly complicates the process of launching a rocket. But, if you align the maverick and the TGP while the aircraft is already in the air (after takeoff) on a target that is 7-8 km away, then the maverick will be guided very accurately to all subsequent targets. The problem is the following: 1. On the ground, having completed the alignment (for example you use it for alignment of any ground vehicle close to the aircraft), the Maverick will still not be aimed exactly at the target. 2. If you carry out alignment TGP and the Maverick in the air (after takeoff) for any distant target (7-8 кm), then there will be accurate guidance of the Maverick with using TGP.

There are no bombers in the DCS. There are fighters, attack aircraft, multi-purpose aircraft. But why is there not a single bomber? In the video 2023 and beyond, this aircraft (B-1B) was shown. Does it know that it is planned to be implemented in the simulator?