pierre0000

Ok I'll get the track file and send it ! Thanks again

Hello commander , thank you I already understood this subject but it got a bit clearer I will try to use the in-game performance monitor and see what happens What I don't understand is that neither the GPU nor the CPU go above 20-30% usage (according to the Nvidia monitor) Shouldn't the CPU be around 90-100% if it was the bottleneck? And even if it is 4 years old , it is still a i9-10900K, it should give me more than 10-30 FPS right ? Hello Big news , thanks for your help I will try that! I perfectly understand that the MP missions can be huge but I'm talking about 10 FPS , there must be some problem regarding CPU and GPU usage ?

Thanks for your help! I tried , was definitely better, around 50-80 FPS , very unstable though. Whereas around 200 in SP .. As an example , on the contention server , I play with a friend he has a little better CPU but lesser GPU and he runs a lot better than me

Update, it seems linked to the F4E ... On other planes, FPS range from 50 to 80 FPS, disappointing with my setup but playable

Hello everyone, I just upgraded my PC to a RTX 5080 and DCS runs smoothly around 200FPS on 4K except on MP servers where it is totally unplayable (32 FPS max no matter the graphical settings, with drops in the air around 5 FPS). The rest of my config : I9 10900K, RAM 64Gb, DCS is installed on an M2 SSD , win 11. What I don't understand is that both the GPU and the CPU runs only around 20% of their capabilities on MP servers, whereas in single player it goes normally to 80-100% for the GPU and 30-40% for the CPU. NB: - I uninstalled TACVIEW - Disables GPU scheduling in windows - Disabled game mode - My drivers are up to date, the game as well - NVIDIA Overlay is disabled - I repaired the game, no error - My paghe file is 65536mb - I tried to rename the hook folder in scripts to hook.bak - I uninstalled mods, just have current hill still installed but I do not see the link? I attached my log. Thanks in advance for your help guys and have a great night/day Cheers Pierre dcs.lognull

Thank you CFrag , that's what I did and it works, but only with the "coalition out of zone trigger" which is a bit complicated to use. Thank you for your time and have a great evening ! Cheers

Hi guys! I do not manage in my missions to detect using a trigger the death of a unit or multiple units which have been randomly spawned using the DML script RND! I attached a test mission with 3 trucks and a flyable Mi24p. When you use a F10 command to kill all units (the one that spawned + the 2 others) it detects the death of the three unit, but when you destroy just the one that spawned, it is not detected. I tried a trigger with the condition "UNIT DEAD" with each of the 3 units, doesn't work, I think the the game thinks that the 3 units are here, even if just one is visible. I tried a "GROUP OUT OF ZONE" trigger , but as they spawn a millisecond after the mission starts, it is immediately triggered. And if I add a "ABSOLUTE TIME MORE" and sets 5 seconds for instance, it doesn't work as well. Do you have any idea? Thanks in advance and have a great night or day! test.miz

Hello Silverdevill , Thx for your answer , I will send it tonight Have a good day

Amazing! Do you have a release date?

Ooh ok thanks for your answer ! The weird thing is that a few weeks ago it was fine

Hey guys ! Since a few days/weeks , I'm experiencing very bad performances on HBCW server. I have a good PC with RTX 3080, I9 10900K and 64Gb of RAM. I use no mods except the A4E. I run on 4K resolution. I tried various settings , nothing changes I always have 32 FPS with drops as low as 5-10 FPS , it is almost unplayable. On the other end , outside of the server I have good performances around 100 FPS. Things I checked : - my GPU and CPU are not overheating - my page file is set at 65536 like advised by Pick guard - my drivers are up to date - I deactivated TACVIEW - I even switched to 1440p , no difference - the log analyser did not find anything relevant - I clean Fxo and metashaders on a regular basis - my CPU is 10th generation so no issue with e/pcores - I did the check/repair files from the launcher - other softwares run smoothly on 4k like Helldivers 2, hunt showdown etc. I'm am out of ideas and would really appreciate your help! Have a good day fellow comrades, Pierre

If someone could help with the F4E I would appreciate it ! I digged into the lua files but it's huge and I don't find it It's a bit disappointing that winwing doesn't do it for us , for trained programmers I guess it super easy ...

I will try that thank you Preston!

Hey Preston, could you explain a bit how this works? I do not find the references for lights in the F4E folder... Thx in advance!

Hi guys ! I am hesitating to invest in an odyssey G9 and wondering how is it rendering in 2024 DCS? Thanks in advance for your answers !