gonvise

Using Oculus Rift. The default view of A10C in VR is completely incorrect and kills the sense of VR in this module, too far forward. If I correct and save default view (with ctr+shift...), with my shoulders against the seatback (welcome VR), part of the HUD is out of view. Please ED, you are doing a great job in VR, but this seems to have an easy solution. The default view of A10C in VR has no sense. Thanks.

+1 Same problem with Oculus Rift. Once editing default view, with my shoulders against the seatback (welcome VR), part of the HUD is out of view. Please ED, you are doing a great job in VR, but this seems to have a easy solution. The default view of A10C in VR has no sense.

+1 Please, I'd like (and I think ereyone) to know if we are speaking this weekend to date release, next week, next month, etc... I'm very impressed with Mig-21, congratulations, but in this momment the performance is very poor compared with other modules, and I'm waiting this patch to starting to fly missions and online. I'm constantly watching the forum waiting news, but I'm tired ;-). I am not criticizing, your communication from first momment is excellent, but you haven't yet reported an approximate date release of the patch... please;-)

+1. Please, simply, say us if there is a possibility to have the patch this week. Thanks.

Hello... Is actually possible to export the radar screen to a second monitor, like MFD's in A10C, SHKVAL in KA50, etc? Thanks.

Tested in the start of Taxiing lesson. 1. Original3D mesh: 30-32 2. Tweaked version with exterior 3D mesh: 30-32 3. Tweaked version with NO exterior 3D mesh: 42-45 The difference between 1-2 before update nvidia drivers to last version (from previous version) was more evident than now.

Thanks Colseg, I've always wanted map the middle position of 3-position buttons (out of DCS-A10C module of course). I have analized the lua and... good trick!!! ;-) A question for all... Is posible to execute two commands in the same button event?... I'd like that when I push gear up, the Gears Handle Lock also release previously.

F5 this forum all afternoon, waiting good news ;-)... I have two rigs, one of them low end, running other modules 30fps approx. in the air. Mig -21 10-15 approx. in the air. If you need some help, here I am ;-)

But I'm able to move fwd and aft if I not connect the trackir... in the moment I put the trackir in my head, the FOV is fixed and the zoom keys doesn't work. Only in new 1.2.4 6DOF, in F15C works fine. Thanks.

+1, but only with trackir in all new 6DOF cockpits.

Thanks Shagrat, I will look your mission....

Yes, tested yesterday again with cheat rampstart, and waiting GPS aligment before switch to NAV. Switch net id's to 1 in flight, before JTAC contact, no triangle. Clean install :thumbup: ... and after 10 unsuccessful attempts without triangle in first mission :cry:, I did second mission, and changing id's, JTAC send me the red triangle without problems, like single mission. I hate first mission!!!!!!!!!!!!!!! :mad: Thanks shagrat!

Assumming that the goal of this mission is to stop the tanks column, I shoot two tanks, say JTAC I have finish, they say me "No, only two tanks", I say them I can't acomplish, and then, they send me home... land at base, taxi, some beers in cantine... 51 %, and I can pass to the next mission...All this without my red triangle!!!!!:megalol: I'm finished this mission? I don't know :joystick:

Exactly, I hold short of the runway, as usual in other sims, but not clearance. Pehaps I put my front tire on runway :doh: . I'll try again, thanks!

I'm using easy comunications, and the other options all realistic. No problem with single mission JTAC training (I don't remember the name, "shooting gallery" I think) First mission first campaign flown yesterday twice again :joystick:, and no triangle :cry:. I set both net ids to one in flight, in CP zone, and one momment before contact JTAC. The messages exchange with JTAC is like single mission; wait 9-line, after they say me "advise when ready for remarks and further talk-on", I say I'm ready for remarks, and after receiving them, I provide the 9-line readback... JTAC confirm me readback okay, and say 'standby data'. The task is assigned to me, because in the comms menu I have the options (engagement, contact, repeat debrief, DBA, check out, etc..). But no message, no wilco button, no red triangle. Ideas/questions... 1. Perhaps, I do something wrong in rampstart. The single mission starts in air and with all systems set and triangle works. In campaign mission, I switch on JTRS and... Anything more must be enabled to receive data? 2. For setting both ID's, I go TAD NET page, write 1 with the keyboard below HUD, and push both ID's, own and group... of course, I verify this, and return TAD main page. 3. At the beginning of the mission, I request startup to the ATC, then taxi, but when I request take off, they say me always "unabled to clear" or something like that. Finally, I take off without permission, but my wingman follow me. Is posible this may be influencing contact JTAC? Thanks. Ok, I will post, thanks.

Thanks, and yes, I did, I have edited the post. A moment before contact JTAC, I set both ids to 1 (in my case, not changed after take off, mmm)

Tested again. First mission of first campaign. 1. Ramp start with cheat Lwin+home (also tested previously with manual rampstart) 2. Switch on JTRS. I see friendly units as xxxx in TAD, etc... 3. I set NET Own ID and group ID both to 1 4. Take off. My wingman follow me. 5. Reach Waypoint CP, and hold. 5.1. I set again NET Own ID and group ID both to 1 5.5. When my wingman meets with me (is a bit slow ;-) ),I contact JTAC and ask for task (check-in). 6. Starts procedure like in Single Mission, where I haven't problem. Wait 9-line, after they say me "advise when ready for remarks and further talk-on", I say I'm ready for remarks, and after receiving them, I provide the 9-line readback... 7. JTAC confirm me readback okay, and say 'standby data'. 8. In this moment, I should receive a message on both MFCDs saying NEW TASKING; acknowledge this and, in the TAD, I should have a WILCO and a CNCMP option on the left and right, and a nice red triangle on the TAD. NONE OF THIS HAPPENS!!!! but... ... If I make a new waypoint in the CDU using the coordenates given by JTAC, I can locate the tanks and finish the task, and then, JTAC send me home. But I want my triangle!!!!!!! :cry: :lol:

Thanks kingpinda, but I think not, and also, when stand by data, I don't have the possibility of push wilco button in MFCD to accept the task, and directly the task is "auto assigned"

Yes, JTRS switch ON. In the single missions, I don't have problem with JTAC, red triangle appears after wilco confirmation, but in these single missions the A10 starts in flight. In campaign, I do a rampstart... perhaps I forgot something, but the switch JTRS is on, and I see the xxx where are friendly units. This afternoon I will try a cheat rampstart with Lwin+home :huh: Thanks

Does anyone works red triangle in first mission of first campaign? Fisrt mission of first campaign... own id and group id reset both to 1 in flight a moment before contact JTAC. I receive the nineline, got standby for data... and NO triangle. :doh:

Hello... I have no problem receiving JTAC data in single missions, but I'm testing the first mission of the first campaign and I don't receive data via triangle and wilco button not appears. Previously, and following the tips of this post, I have changed the own id and group id, both to 1, a moment before JTAC contact. Anybody have tested this in this first mission? Any ideas? Thanks!

+1