

Mike_Toth
Members-
Posts
22 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by Mike_Toth
-
That did the trick... thank you so much !!!!
-
Good Day all, I am receving the following upon startup.... no mods ever installed tried the .repair and .clean powershell options to no avail: Havent been on DCS for a few weeks and updated to current version earlier today. any help much appreciated. tks Mike
-
New to VR... trying to setup Quest 3 for DCS
Mike_Toth replied to Mike_Toth's topic in Virtual Reality
Thanks guys ill try both the settings and that quad view API.... much appreciated -
New to VR... trying to setup Quest 3 for DCS
Mike_Toth replied to Mike_Toth's topic in Virtual Reality
I finally got it working ... not sure what I did but uninstalled the Meta PC app and re-installed and re-connected the headset. Now I have to figure out the optimum settings I believe both in DCS and the headset to get smooth rendering... its kinda choppy and am seeing some screen tearing on the edges of the VR field of vision.... been watch several YT vids for settings using the Oculus Tray Tool... Also a question... I set the boundary in the headset to sitting down... when I got in I still see the circle boundary in the cockpit.... is there a way to turn that off? tks much for the help Mike oh yeah these are my system specs.... new Acer gaming laptop Device name Acer-Predator32 Processor Intel(R) Core(TM) i7-14700HX 2.10 GHz Installed RAM 32.0 GB (31.7 GB usable) System type 64-bit operating system, x64-based processor RTX 4070 8GB Nvidia card -
New to VR... trying to setup Quest 3 for DCS
Mike_Toth replied to Mike_Toth's topic in Virtual Reality
Yeah I did that test and it works -
New to VR... trying to setup Quest 3 for DCS
Mike_Toth replied to Mike_Toth's topic in Virtual Reality
Ty so much.. I will try those when I get homeclater today. I'm a DCS veteran, but a VR rookie!!. Will let u know how it goes. I greatly appreciate the help...p s. This is my cable -
New to VR... trying to setup Quest 3 for DCS
Mike_Toth replied to Mike_Toth's topic in Virtual Reality
Tks much Diego, I'll try that when I get home as well... sorry for the dumb questions but I've never used a VR headset so this is brand new to me..... watched some yt videos on all these settings and tweaks but they are 6 months and older so not sure what has been improved. ... I did try with the dcs VR enabled setting on and and removed the force options , retested my cable connection but still no joy...appreciate your help... will let u know -
New to VR... trying to setup Quest 3 for DCS
Mike_Toth replied to Mike_Toth's topic in Virtual Reality
'Just set the meta app as the default open xr runtime in settings' Tks for the replies...could you show me where this default option is?.... ill try running without the force commands... and check that VR enabled setting in DCS ...i believe it is on -
Hello all, I finally went the VR route and purchased a Meta Quest 3. I have installed Open XR and connected the headset to my PC via a cable and tested the connection.. all good.... I did create a shortcut using the multithread version of the .exe that lives in the bin MT folder with the --force enable commands at the end of the target line... when I use this icon it still presents the program on my monitor vs inside the headset.... am I missing a step somewhere along the line? any help would be greatly appreciated... tks much Mike
-
need track replay HUD display missing ....
Mike_Toth replied to Mike_Toth's topic in Bugs and Problems
yeah somehow those HUD controls got mapped to a slider on my throttle..... cleared them and Im all good.. tyvm for the help -
Hi all.. I am experiencing an issue whereby when I start up and have everything going and all the HUD switches set I have no HUD display... I turn up the dial on the UPC on upper left console to turn the brightness up and it does come up and display but once I click away from that wheel the HUD disappears.... nothing... am I missing something or is it a known issue?... tks very much Mike
-
Cockpit View Locked Forward, Unable to Pan View
Mike_Toth replied to ESzczesniak's topic in View and Spotting Bugs
I have the same problem with my Tobii EyeTracker 5..... if I stop the EyeTracker from use I should default to my POV hat views.... did the same thing the op did with no joy. we shouldnt have to uninstall that software... make sure its not running sure, but not uninstall.... -
Greetings all. I have been having alot of issues of my bound key and stick bindings not working since 2.8 update. Specifially my POV hat on the X56 stick. I have gone under the general section in the control setup and set the views for each view and also tried setting the same in an individual aircraft and removing the settings in the general option and both show that they saved the selection but when I go into the cockpit nothing moves.... it jumps briefly but does not pan . I did check for redundant settings as I know that happens occasionally and I have none. Also several of my keyboard bindings do not work either... I do have Tobii Eye Tracker 5 in my system but I tested it without running the Tobii software and disconnecting the eyetracker temporarily.. still no joy..... checked my hardware settings and drivers and all looks good as they work fine in MSFS 2020... Any help would be greatly appreciated.... oh also I checked to ensure the 'game modes' were not selected by default and they are not... tks much Mike
-
DCS 2.5.5.31917 main menu freeze and mouse problem
Mike_Toth replied to Mike_Toth's topic in General Bugs
Thanks for verifying that.. I still think its a bug. The option to change resolutions in the settings menus would not be needed then... -
DCS 2.5.5.31917 main menu freeze and mouse problem
Mike_Toth replied to Mike_Toth's topic in General Bugs
Could be . Im running at 2560x1440... my monitor is a 3840 UHD.. ill look at that, but it should work either way as the 2.5.4 i reinstalled works ok with the different resolutions -
DCS 2.5.5.31917 main menu freeze and mouse problem
Mike_Toth replied to Mike_Toth's topic in General Bugs
Sure...this is a nice 3rd party utility Skatezilla wrote. Choose the Update button at top and it will give you options to install any version. I went back to the last release version ... Worked perfect.. https://forums.eagle.ru/showthread.php?t=160053 -
After installing newest beta, main menu became unresponsive. with no mouse input being detected. I reverted to the earlier 2.5.4 release version using the DCS Updater utility and all is good. Most certainly an issue with this beta
-
I think the core update they pushed just prior to the F14 releasing is the culprit....other plane modules are experiencing the same problem... seems to be a memory leak from the symptoms I see... its sucking the RAM up bigtime
-
Same here, super long load times SP and MP, Black screen and random CTD's Acer Predator Helios I7-7700 16GB RAM DDR4 512 SSD hard drive GTX1060 6GB ddR5 All drivers up to date
-
The servers were being slanmed. Took me 5 hours to download 2.5.....wasnt you, it was alk of us!!. .LOL Sent from my SM-G955U using Tapatalk
-
IMPORTANT MiG-21bis StarForce PATCH - APRIL 2017
Mike_Toth replied to Dolphin887's topic in MiG-21Bis
Hi... I need a bit of clarification on fixing the Mig-21.. I havent flown DCS in a few months so yesterday I decided to get back into it. I ran both updates on the 1.5.6 and the 2.05 installs on my rig. I didnt know about this pre-cleaning process described prior. So obviously when I ran my 1.5.6 (and the 2.0.5) installs I received the errors on the Mig-21 install. I uninstalled the Mig21 from both of my versions. Then I saw the blurbs about running a Registry Cleaner file. So my question is , with the Mig completely uninstalled from both versions, do I have to now run this Registry cleaner file before I re-install the module or can I just re-install since I removed it??.. Thanks in advance Mike