[New StreamDeck Plugin]

Hi,

maybe someone can point me to the right direction. I try to export the ARC-210 Frequency from the A-10C II to the streamdeck. Device ID is the right one, but it wont update if I change the Frequency in the Cockpit. It worked fine before the A-10C radio update to the ARC-210. I´m using the latest A-10C_2-lua from Github

[Streamdeck Plugin with DCS BIOS beta]

I´ve got the same problem as Toni

[DCS-ExportScripts for Stream Deck Community Github Library]

14 hours ago, Bailey said:

Now that I think of it, this stems from a problem that I found maybe over 2 years ago, reported, and ED never got around to fixing. 
Yesterday I tried to rebind by hand with no luck, unfortunately. If you can, maybe normal streamdeck hotkeys may work for you instead.

 

They are working (3009, 3010,..) in my SD profile. I set the value change to 0.1 and -0.1. But I can read out the whole AM (2002) or FM frequency (2004) "only"

The Problem is when you look up the ID for the AM or FM 1st frequency it has a limit from 0 to 1 and a value change of 0.1 so thats 10 possibilities.

But you can change the frequency from 03 to 15 in the A-10 so thats 12 possibilities, after 1 circle the value changes.

For example: When you start the aircraft: AM 3X.XX is 0.30 and if you circle till 15X.XX and then 3X.XX again the 1st value is 0.50 and so on....

@skypickle You can try my profile if you want. Its for the SD XL

 

DCS A-10C II + Export.streamDeckProfile

[Kneeboard bookmarks]

If anyone needs the kneeboard bookmarks Munkwolf made it possible 

 

[Community Keybinds Project 22.1.22 Release]

Thank you for your time & work!

Is there any chance to make the kneeboard bookmarks keybinds available for the A-10C_2? 

[Kneeboard bookmarks]

Push +1, Please ED, give us the bookmarks, I´m sure these are only a few lines in the code. You can make bookmarks with a click with the mouse, only the keybindings are missing

[DCS-ExportScripts for Stream Deck Community Github Library]

9 hours ago, Bailey said:

The script should now be compatible with winwing export. 

Thank you, it works perfectly

[DCS-ExportScripts for Stream Deck Community Github Library]

...and click the green Code button next to the About box. then click Download Zip....

I must have been absolutely blind..

Thank you!

[DCS-ExportScripts for Stream Deck Community Github Library]

Thank you for your work and I have a few questions

• Maybe its because I´m old and slow, but is there somewhere a link to download the whole package on github?
• Any chance to make it compatible with the winwing export? -> No lights on the gear handle in the A-10C_2
• Last one, I found the fuel quantity counters (90.91.92) for the A-10C_2 but how can I calculate the whole lbs to make an output for the StreamDeck?

And maybe something I have found in the lua file regarding the IFF Antenna Switch. I had to change it in the A-10_2.lua from

[706] = "%1d",     -- IFF - antenna switch

to

[706] = "%0.2f",     -- IFF - antenna switch

to make it work with the StreamDeck, because its a 3way switch

[Quaggles - DCS Input Command Injector Mod - Store custom input commands safely in Saved Games instead of merging them with developer changes each update]

Spent the last two days learning and programming the default.lua´s and today I found this amzing piece of code 

Thank you, you saved me a lot of time!

[How to set up toggle switches (a tutorial)]

2 hours ago, LeCuvier said:

You  don't need a dedicated .lua file for your button box under "...\DCS World OpenBeta\Mods\aircraft\FW-190D9\Input\aircraft\joystick".
The "default.lua" is good for all game controllers that don't have a dedicated file like "Throttle - HOTAS Warthog.lua".

Thank you! Everything is working now

[How to set up toggle switches (a tutorial)]

I made a Button Box with a LeoBodnar. I can set it up without any problems in the DCS Setup Page.

But where do I find the specific lua file for this box? There is no lua file in the DCS/Mods/... (and so on) Input or Joystick folder.

I only found a button box lua.diff file in the DCS saved games folder

 

[2.7.0.4625 Open Beta crash at second mission load]

I upgraded my Nvidia Drivers to 466.55 (came out today) and my 2nd mission crashes are gone

[Der Handelsthread]

Hallo zusammen,

 

VR und ich sind leider nicht kompatibel , aus diesem Grund verkaufe ich meine wirklich wenig benutzte (eigentlich neue) Oculus Rift S inkl. Originalverpackung und Versand in D und AT um € 295,-

Schöne Grüße aus Wien

Stefan

[Der Handelsthread]

*** VERKAUFT ***

Hallo,

da ich kaum mehr fliege, verkaufe ich schweren Herzens meinen VPC MongoosT-50CM2 Throttle

Wenig benutzt, Zustand wie neu, Kaufdatum Mai 2020, funktioniert einwandfrei

 

Hoffe ich mach jemandem eine Freunde mit der Rarität

Schöne Grüße aus Wien

Stefan

 

[Der Handelsthread]

VERKAUFT

 

*** VERKAUFT ***

 

Hallo zusammen,

 

nachdem ich meinen Virpil CM2 Throttle bekommen habe (ja, es gibt ihn wirklich :D ), verkaufe ich meinen ersten VIRPIL Mongoost-50 Throttle. Wenig benutzt (vielen Dank an meinen Nachwuchs :D ) und funktioniert einwandfrei.

Versand aus Wien

 

PM bei Interesse

 

*** VERKAUFT ***

[DCSFlightpanels (DCSFP) thread. Saitek Pro Flight Panels & DCS]

Hello Hammer,

 

First times on GitHub can be fast confusing I agree; which version to install, why some download haven't .exe file, what difference between DCSFlightPanels/DCS-BIOS and DCS-BIOS/DCS-BIOS, etc...

There are downloads for developers and download for users. Go on release section to get downloads for users (with .exe file). About DCS-Bios, on first page of this forum, the link for DCS-BIOS bring you to DCSFlightPanels/DCS-BIOS main page and not on the release page. Clic on "releases" to get access to release versions for users. Please note that DCS-BIOS v0.10.0 is from DCS-BIOS/DCS-BIOS which is more for SimPit (Home Cockpit) builders. DCS-BIOS from DCSFlightPanels/DCS-BIOS is for DCSFlightPanels. If you prefer the easy way, go with DCSFlightPanels/DCS-BIOS.

 

Hope this help.

 

If somebody see I'm wrong, please advised

 

 

If somebody see I'm wrong please advise.

 

Thank you for the explanation :thumbup: After a very, very short test, it seems to work now

[DCSFlightpanels (DCSFP) thread. Saitek Pro Flight Panels & DCS]

Sorry I´m totally lost :cry: btw. the DCS-BIOS and DCSFP versions, could someone be so kind and point me to the right direction

After a looooong absence from DCS I started all over again with my Switch Panel (PZ55) and here is my problem:

 

Installed the DCS-BIOS v0.10.0 and the the DCSFP 4.0.39a..

So there is no more DCS-BIOS Folder inside the SCRIPTS Folder and I cannot find any *.exe in the 4.0.39a Folder.

 

I tried it with an old DCS -BIOS 0.7.1 and DCSFP 3.6.22 and it somehow works but only as a KeyEmulator.

 

What is the right way to use DCSFP nowadays?

Thank you very much

[Buddy-Fox A-10C UFC]

:thumbup: Thank you

[DCSFIPS, Saitek/Logitech FIPs & DCS-WORLD]

Hi ArthurDCS!

 

Great news, that you are still improving your SW :thumbup:

It´s one of the Must Have SW with DCS

 

A small Feeedback, tested with latest 2.0 Alpha, 1.5.7 and DCS-BIOS v0.6.0

 

DCSFlightpanels_x64_2.1.699:

FIP is working

 

Performance is improved when CPU Priority is set to Highest

Still laggy but its working for me

 

DCSFIPS_x64_1.0.49:

Doesn't work :(

 

No FIP Image in the Setup Window of your SW

when I try to save a setting, I get an Error message like .... something with HidLibrary.dll.....

I took the dll-File from 2.1.699 -> resolved the Error message when saving (still no FIP Picture)

 

The FIPS 1.0.49 doesn't show the HSI or VVI

[DCSFlightpanels (DCSFP) thread. Saitek Pro Flight Panels & DCS]

Thank you :thumbup:

[GUTS 'N GUNSHIPS: What it was Really Like to Fly Combat Helicopters in Vietnam]

Thanks chichlidfan :thumbup:

[Increased panel text size in A-10C]

Thank you!

What a great mod :thumbup:

I´m able to fly the A-10 with my Rift

[Logitech G910 (Orion Spark) Mod]

This looks great!

Can you send me a copy?

[DCSFlightpanels (DCSFP) thread. Saitek Pro Flight Panels & DCS]

Can you see the course needle move when turning the knob?

Yes. Both knobs are working perfectly and the needle is moving.

 

Sometimes the FIP and the FP software stop working. I have to switch back to the desktop and start your software again. Then switch back to DCS and the FIP is working.

 

For me its no big deal, its a great software :thumbup: