lawsjr

Posted this in another one but This is a free 3d printable throttle. I used an K1 Max printing CF-ABS for most of it. It uses potentiometers for the levers but I am thinking of switching to Rotary Encoders. Right now I don't use DSC-Bios.. The Arduino Micro boards show up as game controllers in windows 11.

3d Printed F-14 Throttle. Finally got it all working with button assignments. Two Arduino Micro boards.

Good luck with the Leonardo board and your project. I have been working on the F-14 throttle for a couple of months. Right now I have everything working but the Exterior Light switch and the speed break switch. The Wing Sweep hat is giving me a fit as only two directions will test out with Arduino IDE.. Checked wiring today and found an issue. Fixed that but still not working right. So keeping on troubleshooting

There is an open source mod for the Bigscreen for eye tracking. You can do it yourself and 3dprint the parts needed.

For me with VA and Viacom. I can't get the Jester Option to work consistently. It will work once, or bring up the wheel but you can't select anything. Next time I can't get it to work at all. Just the static like you get when talking to jester. i have to say never mind to get it to go away.

Understand about the Jester wheel.. I don't get it even with Jester Options. It will show up one time but not the next. Sometimes I get the rose with just jester, sometimes I get the options most of the time I just get the click and the noise until I say never mind. It might work with the release version but not the bata, then it doesn't work in either one. So not sure what I am doing wrong.

Well I have VA and Viacom and seem to have it all working, but when I say Jester or Hey jester I get the click and the sound of the menu rose but no menu rose. Any ideas?

yea it worked yesterday and got the new bata today and seemed to work. Havn't tried the release version yet.

can't copy the file here so here is all that is in it. sound.channel_mask = 3 I did find yesterday that the file had been renamed from autoexec.cfg to autoexec.cfg.txt. Which is strange as I use Notpad ++ as an editor so it doesn't add that txt to the file, or any special characters in the file

already did the autoxec.cfg work around. It only helped once. The big thing is it doesn't matter if I am using the bata or the release version. It is a crap shoot if it will have sound or not. At times I have rebooted the PC 5 times to get it to work. I stopped with the open bata when the autoxec.cfg didnt' work. But today neither one would work. no matter what I tried.

Just tried it in both release version and Bata version with the autoexec file as mentioned Nothing works with a USB headset. Bata version log: SOUND: Opening default audio device. 2020-09-21 20:30:55.780 INFO SOUND: Driver reports 1 channels with mask 0x0 2020-09-21 20:30:55.780 INFO SOUND: Using 0 channels at 48000 Hz 2020-09-21 20:30:55.780 INFO SOUND: Channel layout: 2020-09-21 20:30:55.781 ERROR SOUND: Failed to Initialize IAudioClient: 0x80070057 (E_INVALIDARG) 2020-09-21 20:30:55.781 ERROR SOUND: Failed to start SND_Renderer. 2020-09-21 20:30:55.781 ERROR SOUND: can't start renderer release version log: SOUND: Opening default audio device. 2020-09-21 20:31:39.658 INFO SOUND: Driver reports 1 channels with mask 0x0 2020-09-21 20:31:39.658 INFO SOUND: Using 0 channels at 48000 Hz 2020-09-21 20:31:39.658 INFO SOUND: Channel layout: 2020-09-21 20:31:39.659 ERROR SOUND: Failed to Initialize IAudioClient: 0x80070057 (E_INVALIDARG) 2020-09-21 20:31:39.659 ERROR SOUND: Failed to start SND_Renderer. 2020-09-21 20:31:39.659 ERROR SOUND: can't start renderer

did the autoexec.cfg thing worked once. but not anymore. Was working if I used my old analog headset through my sound blaster card, but now even that doesn't work without a reboot or some other magic to get it working.

Thought I had found the issue. Moved my Track IR to another USB port and it worked. Tried to play again and even with a restart and nothing going be track IR no sound.

I would be the only thing it is effecting is the USB headset. I can even get it to play to my home surround sound system with Bluetooth, so not sure that would be a driver issue if it works everywhere but DCS.

I am having the same issue in both release and bata. What I have found is that if I do anything on the computer, such as opening a web page first and then closing it and then starting DCS I get no sound. Restart the computer and sometimes that works sometimes not. Bata Log: SOUND: Opening default audio device. 2020-09-12 23:54:49.602 INFO SOUND: Driver reports 1 channels with mask 0x0 2020-09-12 23:54:49.602 INFO SOUND: Using 0 channels at 48000 Hz 2020-09-12 23:54:49.602 INFO SOUND: Channel layout: 2020-09-12 23:54:49.603 ERROR SOUND: Failed to Initialize IAudioClient: 0x80070057 (E_INVALIDARG) 2020-09-12 23:54:49.603 ERROR SOUND: Failed to start SND_Renderer. 2020-09-12 23:54:49.603 ERROR SOUND: can't start renderer Release Log SOUND: Opening audio device "{0.0.0.00000000}.{a64c1708-d6b7-4eb6-8f1d-6788af377684}" 2020-09-12 23:57:33.033 ERROR SOUND: Failed to init IAudioClient on device: 0x88890004 (AUDCLNT_E_DEVICE_INVALIDATED) 2020-09-12 23:57:33.033 ERROR SOUND: Failed to start SND_Renderer. 2020-09-12 23:57:33.033 ERROR SOUND: can't start renderer

I am having a problem getting things to work with the f14 startup. Every time I say Check VA takes it as Confirm Checkpoint. Any ideas on how to fix this?

I had to log in two times and out. On the third time in it did the update to DCS then when I logged in on that one it prompted for the Persian Gulf Map.

i am guess that the Persian Gulf Map is still unavailable as of today 23 May 2018? Being that it doesn't should up in my download manager or anywhere else except when I look to see that it says I bought it. Any news or ideas?

Not sure if this has been asked before and answered, but I have changed my view position in the cockpit for the A-10 and F-15, and saved that to the user Saved Games folder as the instructions say , but when I launch DCS it doesn't read this file. The only way I can make it work is to change the file in the DCS config view folders. any ideas what I am doing wrong?

There wasn't until the last update and yes I know I have the gun on my HOTAS and I have the radar on and the target locked up. Gun site is tracking target so everything is set up correctly. when trigger is pressed nothing . when I look at the MFD the switch for master arm is off. I know of no way to turn it back on . Can go to setup for controls and depress the trigger and it works there just not when flying the mission. So something changed in the last update

Just tried to do the aggressor in Nevada and the master arm is off, anyone know how to turn it back on?

Same issue here. Locks up DCS then crashes the program.

Same problem. Just did the update still no axis control in the F-15. Works with everything else so not a joystick problem it is a DCS problem.. Yes very frustrating.. Hope they fix it soon.

I can move and get the stuff on the right of the hud where I want it. How do I move the stuff on the left of the hud and also how do I lower the compass tape to the bottom of the hud.

Yea it was a strong cross wind.. That is with everything set at old_K = 73.5 new_K = 75.5 --44. The heading should be lower and not sure how to move that. and the text on the left and right should be smaller and moved in some.. the Pitch ladder wasn't really that bad. Next time will try to get it more in the center