Jump to content

johnnyxtheman

Members
 View Profile  See their activity

  • Posts

    36

  • Joined

  • Last visited

 Content Type 

Everything posted by johnnyxtheman

  1. johnnyxtheman
    hi i have abit of the same problem although i have a new build pc (ASrock z790 riptide wifi, 64gb ram kingston 2x32, i9 14900k., samsung 980 m2 ssd 2TB, PCU 1050w gold +), and i could play for arround 20 min, with the A-10CII, on normandy made a simple mission to fly low allong the cost line. and sudden freezes. sound goos on an must hard reboot. i have only 1 mod installed for dark hud on A 10C, not the A 10CII yet i had this a few times so i did a system benchmark with synebench but all was good. CPU and GPU. all were good temp from cpu not higher than 85 degrees and not overclocked GPU also not overclocked. so don't know next what to do..
  2. johnnyxtheman
    i figured it all out an now all is good , juat still have problem that joy trim is not working . i see the trim hat moving in cockpit but plain is not responding. also tried whit keyboard shortcuts but same resulds
  3. johnnyxtheman
    year i saw its not overweighted, i added it standard on the mission editor set skills to player,to test for the all joys reacting on the aircraft. i just pulled back a litthel just for take off. and asoon its of the ground i pusch the stick forward to go straight, but beeping start again bij just pullign it back just enough to get the nos rize,, and after the nose is up about 2/5 degreas, it start beeping again. when you look at the picture above abouit the axis tune, this little black dot is not in the senter of the line. and it is in center of the roll line. so i think now that it is a stick calibration that is not right.. so i calibrated it in windows game contral.. and i now golook how if this is in center
  4. johnnyxtheman
    hi, i have quiseton abouit placingt the landing point at start of runway wher the landing begins bu the it jumnps back to center. should that be ?
  5. johnnyxtheman
    oke, i don't see this GAME FLIGHT MODE . and that is on the misc tab as far as i know so nothing to disable there. the video show the moment i start pull back a little. let the plain com up and start to beep, and this is befort i pulle al the way back , just to show how muts is left of the pull range . and still not able to use the time mode so think that if i can use this. than it would be less beeping 20250318_160239_Trim.mp4
  6. johnnyxtheman
    year i saw its not overweighted, i added it standard on the mission editor set skills to player,to test for the all joys reacting on the aircraft. i just pulled back a litthel just for take off. and asoon its of the ground i pusch the stick forward to go straight, but beeping start again bij just pullign it back just enough to get the nos rize,, and after the nose is up about 2/5 degreas, it start beeping again. when you look at the picture above abouit the axis tune, this little black dot is not in the senter of the line. and it is in center of the roll line. so i think now that it is a stick calibration that is not right.. so i calibrated it in windows game contral.. and i now golook how if this is in center
  7. johnnyxtheman
    i have lookt ad the pithch axis tuning and the black center rectagnle is not in the center of the line. should this be ?
  8. johnnyxtheman
    year i saw that to.. did not do that but how this happens.. beats me..
  9. johnnyxtheman
  10. johnnyxtheman
    i did not pull back the stick hard... just a litle for take off and statr beeping already
  11. johnnyxtheman
    pitty that i can only add 50mb.. its way to short but oke.. ..on take of just pulled back a littel and start beeping. i don' remmember waht this souind is but looks like a G- force warning at first i could even not com of the grouind but after disableing all in VR tab i could, just no stays this rappit roll if i pulled back al the way, and ths warning on just a littel pull back and starts beeping nose up and sound 2.mp4 forgot to mension, that i can't trim the stick,, i set it the button and the trim on the stick onboard is moving but nothing happens. and this is in game mode or simulation mode
  12. johnnyxtheman
    hi simmers. i started again playing dcs world on a new highend pc. instaaled everything new. but found out i couldend lift of at first.. search on internet but found nothing .. so looked arround on settings and disabled everything on the VR tab becase i think maybe this is interviring somehow... and yes.. now i can lift off but only when pulled back just slidly pull back the stick, whits didden;t happen when everythin was set on installing dcs word on the VR tab. when in flight and pulled back harder and plain start to be very nerves rolling left and right and hard to fly straight, but no or litthel nose up, only on just al litthe pull back nose goos up slowly... nose down no prolblem .. roll .. no prloblem. joy movement in plain working normal.. all settings have bin deleted and just have hardware setup, no douibles.. only needed, but still the same on every plain i tried.. heli no problem flying joy in windows setting properties al work normal. did not chanbge nothing yet .. all are standard hoop somebody can help ,, thnks in advanced ! pc specs vidwo RTX 4060 TI cpu intel i9 14900k ram kinston 2x 32gb mobo ASrock Z790 RIPTIDE WIFI M2.SSD 980 2 TB PCU SILENCE 1050W
  13. johnnyxtheman
    now by trying this its not very clear what to change . i change the left = 0.964925826 to half (and all others) with calculator and did this to all . but have no change in FOV. the "left = 44.0º," . i can't find a setting that looks like that to set ti to that number . no % also "Which means your new horizontal FOV is 44.9º and new vertical FOV is 52.5º. " ?? would be nice if you more explainte step by step what to change and where to change it thks in advance !!
  14. johnnyxtheman
    Thkx man.. gona try this today...have the same problem with the field of view is way of. Tried it with trinusVR but is imposible to tweak all the angels ..until I find moonlight app and server . The client connected instandly to the server on PC, no problem what so ever there. So now only the field of view tweaking and all should be well !. This again !!:thumbup:
  15. johnnyxtheman
    NO VR ?? but that's in full screen , no VR SBS!! so why show on a smaal screen if not using VR ?? than better on pc screen or tv screen . i installed the moonlight on pc and my phone and works oke , but no vr look. so now i need also program like TRITON ??? do they work together or no need for moonlight ? by the way , the time i had moonlight connected ,, is looses to quick connection.. had to press regaine connection ?
  16. johnnyxtheman
    fresch install ?? iss't there un other way ??
  17. johnnyxtheman
    :thumbup: hi i can't wait when it comes out...can you tell me when it will be ready for down!oad ? and i read somewhere that it will be free to ? if it's not free than i will sertenly buy it.:thumbup:
  18. johnnyxtheman
    ["LAlt"] = {key = "LAlt", device = "Keyboard", switch = true}, << must set to "false " and it won't stick anymore , i had this a long time ago whit the a 10c and workd because of this without any problems
  19. johnnyxtheman
    I have mine on the left side under MODIFIERS but keeps sticking on a used modifier pincky fwrd or aft and won't change to an other button if i press weapon fire in joy 1 without a modifier ad i remember that i had to change something from "true" to "false" but what CFG file i don't remember
  20. johnnyxtheman
    oke guys. found out what was the problem on me. turns out it was me g940 padels that's suddenly shifted to the right . I saw the horizontal bar suddenly shifted to the left a bit which made the plane also bank to right ,and when I hit me pedals a few times , it was straight again, so I think it must be cleaned I also found out that the speed makes the plane pitch up or pitch down. when I go 200 , ti pitch down ,when go 270 or more it pitch up , when going 240 or so, its almost straight and have not must to trim. so mabe it is the airodynamics of that plane that makes it do this in real live, and therefore in the sim to, or it is the sim it self somehow .
  21. johnnyxtheman
    same here I was practicing formation flight for 5 minutes and no problem fliing straight, but suddenly it rolls strongly to the right. Did not had this problems from the moment I bought it and that's no a view weeks ago. even when in autopilot, it suddenly rolls to the right and hear the autopilot warning and I did nothing at all . could be that I installed the bigger hud fonts mod ,because after that it started so must changes that back and will see . I will poste results.
  22. johnnyxtheman
    OYEAR,,,, THAT'S VERY CLEAR !!,,,,
  23. johnnyxtheman
    I have same problem. I made a mission whit all ships available on the cost near by, made them Russian , myself USA, and when I come close up to fire gun or some rockeds , it crashes....
  24. johnnyxtheman
    where to I find what version I have ?
  25. johnnyxtheman
    same here, can't set any modifier to any btn ingame. so what I did was I made the POV of my joyst (G940) to MODIFIER because my profiles does not work good due to a wire problem in my throttle and therefore the profiler mode knop goes crazy. so I set JOY POV to modifiers Lalt Ralt Rctrl Lctrl pinky as Lwin . btn 5 as Rshift , and T3 on thrt as Lshift. I set the modifiers on all mode swich 1/2/3 and use the ingame controls and all is well (until now that is ) so when I go to a 10c controls , select a joy assignment somewhere ,click ADD , and hit one of the modifiers ,than a modifier shows up (Lctrl or,,) and can't add a key but that's logic
×
×
  • Create New...